[Fri Mar 30 12:07:10 2012] Detection parameters: Position = (328.5, 469.1) = 18 56 18.28 -37 40 54.1 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 84.2 +/- 17.6 Background counts = 73.0 Rate = 0.001 +/- 0.0003 [Fri Mar 30 12:07:13 2012] Off-axis axis estimate = 12.56' [Fri Mar 30 13:53:31 2012] Using EEF radius (= 12.71 ")to estimate initial spatial extent for simple fitting [Fri Mar 30 13:53:31 2012] Initial guess for spatial extent in simple fitting = 12.71" [Fri Mar 30 13:53:31 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.046 [Fri Mar 30 13:53:31 2012] Giving source the simple spatial ID 73 for pass 0, mean size = 12.71" [Fri Mar 30 23:00:27 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src73.ximg exists [Fri Mar 30 23:00:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src73.csv [Fri Mar 30 23:00:27 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src73_1.ximg exists [Fri Mar 30 23:00:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src73.csv [Fri Mar 30 23:00:27 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src73_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Fri Mar 30 23:00:29 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src73.ximg exists [Fri Mar 30 23:00:29 2012] fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists [Fri Mar 30 23:00:29 2012] Fit fullrun_mos2_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly [Fri Mar 30 23:01:11 2012] Source 13 is offset by 2.312460 and 6.982330 pixels which is larger than 2 X fitted extent = 1.387218 x 1.387218, not incorporating fit results [Fri Mar 30 23:01:11 2012] Spatial fit model total counts = 713.271000, observed total counts = 673.000000 [Fri Mar 30 23:01:11 2012] Offset between fit and detection position for source 13 = 0.629262 pixels [Fri Mar 30 23:01:11 2012] 632.927300 total counts/ 618.820000 bgd. counts: snr = 0.567103 Spatial fit parameters: Offset between fit and detection position for source 13 = 0.629262 pixels Position = (328.2, 468.5) = 18 56 18.38 -37 40 57.1 Extent = 3.3 (3.2-5.7)", rotation angle = 0 Source counts = 14.1 +/- 25.2 Background counts = 618.8 Rate = 0.0003 +/- 0.0004 Deleting source due to low Poisson probability