[Fri Mar 30 12:05:45 2012] Detection parameters:
  Position = (281.4, 280.0) = 18 56 35.56 -37 54 36.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 31732.6 +/- 212.5
  Background counts = 259.5
  Rate = 0.5 +/- 0.003

[Fri Mar 30 12:05:45 2012] Off-axis axis estimate = 1.82'
[Fri Mar 30 13:37:31 2012] Using EEF radius (= 7.34 ")to estimate initial spatial extent for simple fitting
[Fri Mar 30 13:37:31 2012] Initial guess for spatial extent in simple fitting = 7.34"
[Fri Mar 30 13:37:31 2012] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.045
[Fri Mar 30 13:37:31 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.34"
[Fri Mar 30 13:53:30 2012] fullrun_mos1_xmm0412600201_pi300-10000_cl_pass0_src1.ximg exists
[Fri Mar 30 13:53:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600201_pi300-10000_cl_pass0_src1.csv
[Fri Mar 30 13:53:30 2012] fullrun_mos1_xmm0412600201_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Mar 30 13:53:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600201_pi300-10000_cl_pass0_src1.csv
[Fri Mar 30 13:53:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412600201_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412600201_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 13:53:30 2012] fullrun_mos1_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Mar 30 13:53:30 2012] fullrun_mos1_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Mar 30 13:53:31 2012] Fit fullrun_mos1_xmm0412600201_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Mar 30 23:00:39 2012] Spatial fit model total counts = 22732.200000, observed total counts = 22567.000000
[Fri Mar 30 23:00:39 2012] Offset between fit and detection position for source 5 = 0.050186 pixels
[Fri Mar 30 23:00:39 2012] 22710.300000 total counts/ 5687.000000 bgd. counts: snr = 225.736683
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.050186 pixels
  Position = (281.4, 280.0) = 18 56 35.55 -37 54 37.4
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 17023.3 +/- 150.7
  Background counts = 5687.0
  Rate = 0.3 +/- 0.003
[Fri Mar 30 23:00:39 2012] Vigneting correction estimate = 1.000000
[Fri Mar 30 23:00:39 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Mar 30 23:00:39 2012] Assessing source extent using major axis lower bound
[Fri Mar 30 23:00:39 2012] Source does appear to be extended
[Fri Mar 30 23:00:39 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Mar 30 23:34:18 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Fri Mar 30 23:34:18 2012] Initial guess for spatial extent in simple fitting = 5.81"
[Fri Mar 30 23:34:18 2012] source mask rpix=1.3, npix_max = 13, mask sum = 12, frac = 0.891
[Fri Mar 30 23:34:18 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 5.81"
[Fri Mar 30 23:51:38 2012] fullrun_mos1_xmm0412600201_pi300-10000_cl_pass1_src1.ximg exists
[Fri Mar 30 23:51:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600201_pi300-10000_cl_pass1_src1.csv
[Fri Mar 30 23:51:38 2012] fullrun_mos1_xmm0412600201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri Mar 30 23:51:38 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600201_pi300-10000_cl_pass1_src1.csv
[Fri Mar 30 23:51:38 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412600201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412600201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Mar 30 23:51:38 2012] fullrun_mos1_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri Mar 30 23:51:38 2012] fullrun_mos1_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri Mar 30 23:51:38 2012] Fit fullrun_mos1_xmm0412600201_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Mar 31 07:20:06 2012] Spatial fit model total counts = 22732.200000, observed total counts = 22567.000000
[Sat Mar 31 07:20:06 2012] Offset between fit and detection position for source 5 = 0.000000 pixels
[Sat Mar 31 07:20:06 2012] 22710.300000 total counts/ 5687.000000 bgd. counts: snr = 225.736683
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.000000 pixels
  Position = (281.4, 280.0) = 18 56 35.55 -37 54 37.4
  Extent = 5.8 (5.7-5.9)", rotation angle = 0
  Source counts = 17023.3 +/- 150.7
  Background counts = 5687.0
  Rate = 0.3 +/- 0.003
[Sat Mar 31 07:20:06 2012] Vigneting correction estimate = 1.000000
[Sat Mar 31 07:20:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Mar 31 07:20:06 2012] Assessing source extent using major axis lower bound
[Sat Mar 31 07:20:06 2012] Source does appear to be extended
[Sat Mar 31 07:20:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Mar 31 09:57:27 2012] Counts = 17023.300000, rescaling region sizes by 3.000000
[Sat Mar 31 09:57:27 2012] XMMSAS src. selection expression = ellipse(24437.332000, 24309.640800, 1045.018830, 1045.018830, 0.000000, X, Y)
[Sat Mar 31 09:57:27 2012] Writing source region out to fullrun_mos1_xmm0412600201_pi300-10000_pass1_cl_src5_src.reg
[Sat Mar 31 09:57:27 2012] Extracting stamp from image fullrun_mos1_xmm0412600201_pi300-10000_cl_sm2.00.img.gz, (221, 220) - (342, 340)
[Sat Mar 31 09:57:27 2012] XMMSAS bgd. selection expression = annulus(24437.332000, 24309.640800, 5225.094150, 10450.188301, X, Y) && !ellipse(14754.913208, 22842.812134, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16536.052887, 19786.099472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33435.420600, 22524.351000, 711.487220, 607.592817, 60.942962, X, Y) && !ellipse(14609.637970, 15279.288132, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Mar 31 09:57:27 2012] Writing fullrun_mos1_xmm0412600201_pi300-10000_pass1_cl_src5.gif
[Sat Mar 31 09:57:44 2012] Mean detx,y = (509.29, -205.54) 
[Sat Mar 31 09:57:52 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Mar 31 10:04:08 2012] Binned source spectrum to 10 counts/bin
[Sat Mar 31 10:04:09 2012] Setting source spectrum file to fullrun_mos1_xmm0412600201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Mar 31 10:04:09 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412600201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Mar 31 16:56:01 2012] Updating aperture counts using extracted products
[Sat Mar 31 16:56:01 2012] Error reading totcts from fullrun_mos1_xmm0412600201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Mar 31 16:56:02 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 16:56:02 2012] Using photon index=1.80, rate=0.327, arf fullrun_mos1_xmm0412600201_pi300-10000_pass1_cl_src5.arf
[Sat Mar 31 16:56:02 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 16:56:03 2012] Updating source flux to 2.9e-12
[Sat Mar 31 16:56:50 2012] Reading fit data from xmm0412600201/analysis//spectral/fullrun_mos1_xmm0412600201_pi300-10000_pass1_cl_src5_pl.csv
[Sat Mar 31 16:56:50 2012] Spectral fit parameter nH value = 1.04659e+21
[Sat Mar 31 16:56:50 2012] Spectral fit parameter PhoIndex value = 8.62451
[Sat Mar 31 16:56:50 2012] Failed to get F(0.3-8.0) from xmm0412600201/analysis//spectral/fullrun_mos1_xmm0412600201_pi300-10000_pass1_cl_src5_pl.csv, possibly due to different flux energy range selected
[Sat Mar 31 16:56:50 2012] Calculating source flux in energy range 0.30-8.00
[Sat Mar 31 16:56:50 2012] Using Nh = 1e+21, photon index=8.62, rate=0.327, arf fullrun_mos1_xmm0412600201_pi300-10000_pass1_cl_src5.arf
[Sat Mar 31 16:56:50 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Mar 31 16:56:50 2012] Updating source flux to 2.2e-12