[Fri May 18 10:55:35 2012] Detection parameters:
  Position = (434.8, 462.2) = 18 55 50.36 -37 43 53.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 37.9 +/- 10.5
  Background counts = 28.3
  Rate = 0.0005 +/- 0.0001

[Fri May 18 10:55:36 2012] Off-axis axis estimate = 15.45'
[Fri May 18 11:41:32 2012] Using EEF radius (= 14.16 ")to estimate initial spatial extent for simple fitting
[Fri May 18 11:41:32 2012] Initial guess for spatial extent in simple fitting = 14.16"
[Fri May 18 11:41:32 2012] source mask rpix=3.3, npix_max = 56, mask sum = 56, frac = 0.993
[Fri May 18 11:41:32 2012] Giving source the simple spatial ID 27 for pass 0, mean size = 14.16"
[Fri May 18 12:51:25 2012] fullrun_mos1_xmm0412600101_pi300-10000_cl_pass0_src27.ximg exists
[Fri May 18 12:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600101_pi300-10000_cl_pass0_src27.csv
[Fri May 18 12:51:25 2012] fullrun_mos1_xmm0412600101_pi300-10000_cl_pass0_src27_1.ximg exists
[Fri May 18 12:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600101_pi300-10000_cl_pass0_src27.csv
[Fri May 18 12:51:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412600101_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412600101_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 12:51:25 2012] fullrun_mos1_xmm0412600101_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Fri May 18 12:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Fri May 18 12:51:25 2012] fullrun_mos1_xmm0412600101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Fri May 18 12:51:25 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412600101_pi300-10000_cl_pass0_tfrozen_src27.csv
[Fri May 18 12:51:25 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412600101_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412600101_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May 18 14:15:21 2012] Warning: source 27 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 12 at 12.940561 pixels away
[Fri May 18 14:15:21 2012] Vigneting correction estimate = 1.000000
[Fri May 18 14:15:21 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May 18 14:15:21 2012] Assessing source extent using major
[Fri May 18 14:15:21 2012] Source does appear to be extended
[Fri May 18 14:15:21 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May 18 14:15:21 2012] Deleting source due to low Poisson probability 0.8