[Tue Mar 20 10:14:29 2012] Detection parameters:
  Position = (273.6, 118.0) = 5 34 35.33 21 49 8.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 139.7 +/- 21.1
  Background counts = 47.5
  Rate = 0.02 +/- 0.003

[Tue Mar 20 10:14:31 2012] Off-axis axis estimate = 13.21'
[Tue Mar 20 16:43:08 2012] Using EEF radius (= 13.03 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 16:43:08 2012] Initial guess for spatial extent in simple fitting = 13.03"
[Tue Mar 20 16:43:08 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.002
[Tue Mar 20 16:43:08 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 13.03"
[Tue Mar 20 22:50:08 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_src63.ximg exists
[Tue Mar 20 22:50:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_src63.csv
[Tue Mar 20 22:50:08 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_src63_1.ximg exists
[Tue Mar 20 22:50:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_src63.csv
[Tue Mar 20 22:50:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 22:50:10 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Tue Mar 20 22:50:10 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Tue Mar 20 22:50:10 2012] Fit fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Tue Mar 20 22:50:53 2012] Warning: source 57 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 73 at 10.361384 pixels away
[Tue Mar 20 22:50:53 2012] Warning, spatial fit 63 centroid is now closest to src. 71
[Tue Mar 20 22:50:53 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 22:50:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 22:50:53 2012] Assessing source extent using major
[Tue Mar 20 22:50:53 2012] Source does appear to be extended
[Tue Mar 20 22:50:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 22:50:53 2012] Source is confused with source 2
[Wed Mar 21 04:07:32 2012] Using EEF radius (= 13.03 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 04:07:32 2012] Initial guess for spatial extent in simple fitting = 13.03"
[Wed Mar 21 04:07:32 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.002
[Wed Mar 21 04:07:32 2012] Giving source the simple spatial ID 57 for pass 1, mean size = 13.03"
[Wed Mar 21 09:27:45 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_src57.ximg exists
[Wed Mar 21 09:27:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_src57.csv
[Wed Mar 21 09:27:45 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_src57_1.ximg exists
[Wed Mar 21 09:27:45 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_src57.csv
[Wed Mar 21 09:27:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_src57_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_src57.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 09:27:47 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src57.ximg exists
[Wed Mar 21 09:27:47 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src57_1.ximg exists
[Wed Mar 21 09:27:47 2012] Fit fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src57 appears to have run properly
[Wed Mar 21 09:28:26 2012] Source 73 is offset by 0.246915 and -6.155666 pixels which is larger than
2 X fitted extent = 1.432529 x 1.432529, not incorporating fit results
[Wed Mar 21 09:28:26 2012] Warning, spatial fit 57 centroid is now closest to src. 71
[Wed Mar 21 09:28:26 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 09:28:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 09:28:26 2012] Assessing source extent using major
[Wed Mar 21 09:28:26 2012] Source does appear to be extended
[Wed Mar 21 09:28:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 10:36:59 2012] XMMSAS src. selection expression = ellipse(23751.413605, 10216.339088, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 21 10:36:59 2012] Writing source region out to fullrun_mos2_xmm0412593201_pi300-10000_pass1_cl_src73_src.reg
[Wed Mar 21 10:36:59 2012] Extracting stamp from image fullrun_mos2_xmm0412593201_pi300-10000_cl_sm2.00.img.gz, (236, 80) - (311, 155)
[Wed Mar 21 10:36:59 2012] XMMSAS bgd. selection expression = annulus(23751.413605, 10216.339088, 1087.500000, 2175.000000, X, Y) && !ellipse(24309.914948, 11522.166794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24410.620000, 9503.294000, 2082.576060, 2082.576060, 0.000000, X, Y) && !ellipse(24383.626526, 8565.416649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24319.677490, 9094.163078, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24410.519318, 12313.192947, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24185.208221, 8043.673523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23667.902800, 9322.112000, 1244.544036, 1244.544036, 0.000000, X, Y) && !ellipse(24056.439301, 13171.814819, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23802.057900, 11323.732400, 557.419216, 557.419216, 0.000000, X, Y) && !ellipse(23874.440200, 11539.774000, 1968.272057, 480.572814, 90.000000, X, Y) && !ellipse(25221.800000, 9953.164000, 4138.872119, 4138.872119, 0.000000, X, Y) && !ellipse(23910.739258, 7864.849335, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23908.413452, 12654.800964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23017.008000, 10854.880000, 2085.080060, 2085.080060, 0.000000, X, Y) && !ellipse(23746.897400, 8553.504860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25116.767731, 11006.718079, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 10:36:59 2012] Writing fullrun_mos2_xmm0412593201_pi300-10000_pass1_cl_src73.gif
[Wed Mar 21 11:25:50 2012] Mean detx,y = (-221.60, 14150.48) 
[Wed Mar 21 11:25:52 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 11:26:10 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 11:26:10 2012] Setting source spectrum file to fullrun_mos2_xmm0412593201_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Wed Mar 21 11:26:10 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412593201_pi300-10000_pass1_cl_src73_bgd.pi.gz
[Wed Mar 21 13:16:00 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 21 13:16:00 2012] rmf not generated due to insufficient counts
[Wed Mar 21 13:17:25 2012] Updating aperture counts using extracted products
[Wed Mar 21 13:17:25 2012] Error reading totcts from fullrun_mos2_xmm0412593201_pi300-10000_pass1_cl_src73_src_b10.pi.gz
[Wed Mar 21 13:17:28 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 13:17:28 2012] Using photon index=1.80, rate=0.021, arf fullrun_mos2_xmm0412593201_pi300-10000_pass1_cl_src73.arf
[Wed Mar 21 13:17:28 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 13:17:28 2012] Updating source flux to 7.3e-13
[Wed Mar 21 13:20:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting