[Tue Mar 20 10:14:27 2012] Detection parameters:
  Position = (266.8, 362.9) = 5 34 37.48 22 6 45.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 177.0 +/- 22.3
  Background counts = 272.2
  Rate = 0.04 +/- 0.005

[Tue Mar 20 10:14:30 2012] Off-axis axis estimate = 5.21'
[Tue Mar 20 16:43:08 2012] Using EEF radius (= 9.03 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 16:43:08 2012] Initial guess for spatial extent in simple fitting = 9.03"
[Tue Mar 20 16:43:08 2012] source mask rpix=2.1, npix_max = 26, mask sum = 20, frac = 0.753
[Tue Mar 20 16:43:08 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 9.03"
[Tue Mar 20 22:50:07 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_src34.ximg exists
[Tue Mar 20 22:50:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_src34.csv
[Tue Mar 20 22:50:07 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_src34_1.ximg exists
[Tue Mar 20 22:50:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_src34.csv
[Tue Mar 20 22:50:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 22:50:09 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Tue Mar 20 22:50:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src34.csv
[Tue Mar 20 22:50:09 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Tue Mar 20 22:50:09 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src34.csv
[Tue Mar 20 22:50:09 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 22:50:53 2012] Warning, spatial fit 34 centroid is now closest to src. 21
[Tue Mar 20 22:50:53 2012] Spatial fit model total counts = 3461.250000, observed total counts = 3343.000000
[Tue Mar 20 22:50:53 2012] Offset between fit and detection position for source 25 = 2.910547 pixels
[Tue Mar 20 22:50:53 2012] Warning, changing simple spatial fit ID from 34 to 62
[Tue Mar 20 22:50:53 2012] 3375.761000 total counts/ 3021.940000 bgd. counts: snr = 6.436365
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 2.910547 pixels
  Position = (268.7, 360.7) = 5 34 36.88 22 6 44.3
  Extent = 18.4 (18.3-36.8)", rotation angle = 0
  Source counts = 353.8 +/- 58.1
  Background counts = 3021.9
  Rate = 0.05 +/- 0.009
[Tue Mar 20 22:50:53 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 22:50:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 22:50:53 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 22:50:53 2012] Source does appear to be extended
[Tue Mar 20 22:50:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 22:50:53 2012] Source is confused with source 28
[Wed Mar 21 04:07:32 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 21 04:07:32 2012] Initial guess for spatial extent in simple fitting = 18.39"
[Wed Mar 21 04:07:32 2012] source mask rpix=4.2, npix_max = 89, mask sum = 36, frac = 0.403
[Wed Mar 21 04:07:32 2012] Skipping simple spatial due to low active detector fraction
[Wed Mar 21 09:28:26 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 09:28:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 09:28:26 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 09:28:26 2012] Source does appear to be extended
[Wed Mar 21 09:28:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 10:36:57 2012] XMMSAS src. selection expression = ellipse(23325.458000, 31331.720000, 1103.124032, 1103.124032, 0.000000, X, Y)
[Wed Mar 21 10:36:57 2012] Writing source region out to fullrun_mos2_xmm0412593201_pi300-10000_pass1_cl_src25_src.reg
[Wed Mar 21 10:36:57 2012] Extracting stamp from image fullrun_mos2_xmm0412593201_pi300-10000_cl_sm2.00.img.gz, (205, 297) - (332, 424)
[Wed Mar 21 10:36:57 2012] XMMSAS bgd. selection expression = annulus(23325.458000, 31331.720000, 1838.540053, 3677.080106, X, Y) && !ellipse(25268.380524, 31441.382050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24263.053680, 31510.213684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25325.723846, 31791.484833, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25364.155396, 32370.403351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26027.333923, 31472.135254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24868.960571, 32395.023438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23661.872742, 31559.127289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26003.322000, 33292.888000, 1488.376043, 1488.376043, 0.000000, X, Y) && !ellipse(26910.396667, 31598.989899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25344.009033, 33359.717712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26244.279022, 31963.554626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21290.113831, 31642.800537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23018.267090, 31883.271851, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 10:36:57 2012] Writing fullrun_mos2_xmm0412593201_pi300-10000_pass1_cl_src25.gif
[Wed Mar 21 10:53:03 2012] Mean detx,y = (-1579.90, -7288.96) 
[Wed Mar 21 10:53:06 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 10:53:32 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 10:53:34 2012] Setting source spectrum file to fullrun_mos2_xmm0412593201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Mar 21 10:53:34 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412593201_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Wed Mar 21 13:17:22 2012] Updating aperture counts using extracted products
[Wed Mar 21 13:17:22 2012] Error reading totcts from fullrun_mos2_xmm0412593201_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Wed Mar 21 13:17:26 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 13:17:26 2012] Using photon index=1.80, rate=0.0532, arf fullrun_mos2_xmm0412593201_pi300-10000_pass1_cl_src25.arf
[Wed Mar 21 13:17:26 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 13:17:26 2012] Updating source flux to 1.4e-12
[Wed Mar 21 13:20:36 2012] Flag c found in src. 25 procflags, skipping spectral fitting