[Tue Mar 20 10:14:27 2012] Detection parameters:
  Position = (291.7, 366.0) = 5 34 29.68 22 7 5.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 302.5 +/- 30.3
  Background counts = 270.5
  Rate = 0.06 +/- 0.006

[Tue Mar 20 10:14:29 2012] Off-axis axis estimate = 4.92'
[Tue Mar 20 16:43:08 2012] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 16:43:08 2012] Initial guess for spatial extent in simple fitting = 8.89"
[Tue Mar 20 16:43:08 2012] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.927
[Tue Mar 20 16:43:08 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 8.89"
[Tue Mar 20 22:50:06 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_src15.ximg exists
[Tue Mar 20 22:50:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_src15.csv
[Tue Mar 20 22:50:06 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_src15_1.ximg exists
[Tue Mar 20 22:50:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_src15.csv
[Tue Mar 20 22:50:06 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 22:50:08 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Tue Mar 20 22:50:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue Mar 20 22:50:08 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Tue Mar 20 22:50:08 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src15.csv
[Tue Mar 20 22:50:08 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 22:50:53 2012] Warning, spatial fit 15 centroid is now closest to src. 17
[Tue Mar 20 22:50:53 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 22:50:53 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 22:50:53 2012] Assessing source extent using major
[Tue Mar 20 22:50:53 2012] Source does appear to be extended
[Tue Mar 20 22:50:53 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 22:50:53 2012] Source is confused with source 27
[Wed Mar 21 04:07:32 2012] Using EEF radius (= 8.89 ")to estimate initial spatial extent for simple fitting
[Wed Mar 21 04:07:32 2012] Initial guess for spatial extent in simple fitting = 8.89"
[Wed Mar 21 04:07:32 2012] source mask rpix=2.0, npix_max = 25, mask sum = 24, frac = 0.927
[Wed Mar 21 04:07:32 2012] Giving source the simple spatial ID 13 for pass 1, mean size = 8.89"
[Wed Mar 21 09:27:44 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_src13.ximg exists
[Wed Mar 21 09:27:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_src13.csv
[Wed Mar 21 09:27:44 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_src13_1.ximg exists
[Wed Mar 21 09:27:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_src13.csv
[Wed Mar 21 09:27:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 09:27:46 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Wed Mar 21 09:27:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed Mar 21 09:27:46 2012] fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Wed Mar 21 09:27:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src13.csv
[Wed Mar 21 09:27:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 09:28:26 2012] Warning, spatial fit 13 centroid is now closest to src. 28
[Wed Mar 21 09:28:26 2012] Source 22 is offset by 4.043848 and -0.579393 pixels which is larger than
2 X fitted extent = 1.049200 x 1.049200, not incorporating fit results
[Wed Mar 21 09:28:26 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 09:28:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 09:28:26 2012] Assessing source extent using major
[Wed Mar 21 09:28:26 2012] Source does appear to be extended
[Wed Mar 21 09:28:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 10:36:56 2012] XMMSAS src. selection expression = ellipse(25325.723846, 31791.484833, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 21 10:36:56 2012] Writing source region out to fullrun_mos2_xmm0412593201_pi300-10000_pass1_cl_src22_src.reg
[Wed Mar 21 10:36:56 2012] Extracting stamp from image fullrun_mos2_xmm0412593201_pi300-10000_cl_sm2.00.img.gz, (254, 328) - (329, 403)
[Wed Mar 21 10:36:56 2012] XMMSAS bgd. selection expression = annulus(25325.723846, 31791.484833, 1087.500000, 2175.000000, X, Y) && !ellipse(25268.380524, 31441.382050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24263.053680, 31510.213684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25364.155396, 32370.403351, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26027.333923, 31472.135254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24868.960571, 32395.023438, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23661.872742, 31559.127289, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23325.458000, 31331.720000, 1470.832042, 1470.832042, 0.000000, X, Y) && !ellipse(26003.322000, 33292.888000, 1488.376043, 1488.376043, 0.000000, X, Y) && !ellipse(26910.396667, 31598.989899, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25344.009033, 33359.717712, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26244.279022, 31963.554626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23018.267090, 31883.271851, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 10:36:56 2012] Writing fullrun_mos2_xmm0412593201_pi300-10000_pass1_cl_src22.gif
[Wed Mar 21 10:43:32 2012] Mean detx,y = (402.06, -7431.70) 
[Wed Mar 21 10:43:34 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 10:43:48 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 10:43:48 2012] Setting source spectrum file to fullrun_mos2_xmm0412593201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Mar 21 10:43:48 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412593201_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Wed Mar 21 12:00:53 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 21 12:00:53 2012] rmf not generated due to insufficient counts
[Wed Mar 21 13:17:21 2012] Updating aperture counts using extracted products
[Wed Mar 21 13:17:21 2012] Error reading totcts from fullrun_mos2_xmm0412593201_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Wed Mar 21 13:17:25 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 13:17:25 2012] Using photon index=1.80, rate=0.0623, arf fullrun_mos2_xmm0412593201_pi300-10000_pass1_cl_src22.arf
[Wed Mar 21 13:17:25 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 13:17:25 2012] Updating source flux to 1e-12
[Wed Mar 21 13:20:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting