[Tue Mar 20 10:13:13 2012] Detection parameters:
  Position = (205.4, 270.0) = 5 34 56.66 22 0 9.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 203.2 +/- 21.5
  Background counts = 212.1
  Rate = 0.05 +/- 0.005

[Tue Mar 20 10:13:16 2012] Off-axis axis estimate = 7.05'
[Tue Mar 20 10:17:19 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 10:17:19 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Tue Mar 20 10:17:19 2012] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.579
[Tue Mar 20 10:17:19 2012] Giving source the simple spatial ID 6 for pass 0, mean size = 9.96"
[Tue Mar 20 16:43:05 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src6.ximg exists
[Tue Mar 20 16:43:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src6.csv
[Tue Mar 20 16:43:05 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src6_1.ximg exists
[Tue Mar 20 16:43:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src6.csv
[Tue Mar 20 16:43:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 16:43:07 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Tue Mar 20 16:43:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Mar 20 16:43:07 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Tue Mar 20 16:43:07 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src6.csv
[Tue Mar 20 16:43:07 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 22:50:29 2012] Warning, spatial fit 6 centroid is now closest to src. 34
[Tue Mar 20 22:50:29 2012] Source 9 is offset by -0.377209 and -1.432495 pixels which is larger than
2 X fitted extent = 1.255821 x 1.255821, not incorporating fit results
[Tue Mar 20 22:50:29 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 22:50:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 22:50:29 2012] Assessing source extent using major
[Tue Mar 20 22:50:29 2012] Source does appear to be extended
[Tue Mar 20 22:50:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 22:50:29 2012] Source is confused with source 30
[Tue Mar 20 22:51:14 2012] Using EEF radius (= 9.96 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 22:51:14 2012] Initial guess for spatial extent in simple fitting = 9.96"
[Tue Mar 20 22:51:14 2012] source mask rpix=2.3, npix_max = 31, mask sum = 18, frac = 0.579
[Tue Mar 20 22:51:14 2012] Giving source the simple spatial ID 6 for pass 1, mean size = 9.96"
[Wed Mar 21 04:07:30 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src6.ximg exists
[Wed Mar 21 04:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src6.csv
[Wed Mar 21 04:07:30 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src6_1.ximg exists
[Wed Mar 21 04:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src6.csv
[Wed Mar 21 04:07:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 04:07:31 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Wed Mar 21 04:07:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed Mar 21 04:07:31 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Wed Mar 21 04:07:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src6.csv
[Wed Mar 21 04:07:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 09:28:06 2012] Warning, spatial fit 6 centroid is now closest to src. 8
[Wed Mar 21 09:28:06 2012] Source 9 is offset by -1.271301 and -1.430265 pixels which is larger than
2 X fitted extent = 1.217329 x 1.217329, not incorporating fit results
[Wed Mar 21 09:28:06 2012] Source 9 is offset by -4.726611 and 0.322447 pixels which is larger than
2 X fitted extent = 2.733481 x 2.733481, not incorporating fit results
[Wed Mar 21 09:28:06 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 09:28:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 09:28:06 2012] Assessing source extent using major
[Wed Mar 21 09:28:06 2012] Source does appear to be extended
[Wed Mar 21 09:28:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 09:28:50 2012] XMMSAS src. selection expression = ellipse(17822.362808, 23438.398926, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 21 09:28:50 2012] Writing source region out to fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src9_src.reg
[Wed Mar 21 09:28:50 2012] Extracting stamp from image fullrun_mos1_xmm0412593201_pi300-10000_cl_sm2.00.img.gz, (168, 232) - (243, 307)
[Wed Mar 21 09:28:50 2012] XMMSAS bgd. selection expression = annulus(17822.362808, 23438.398926, 1087.500000, 2175.000000, X, Y) && !ellipse(17829.843353, 24229.018860, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17826.509964, 21617.327606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17700.238098, 26123.594666, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17689.904724, 25520.175537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17676.640198, 25045.453644, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17241.891098, 24196.707153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17473.854370, 23787.272430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17137.746246, 23592.021576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17833.706421, 22741.344879, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17591.993881, 22060.745377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17101.178528, 22070.437561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17378.763168, 21170.718491, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 09:28:50 2012] Writing fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src9.gif
[Wed Mar 21 09:31:47 2012] Mean detx,y = (1384.15, 6822.23) 
[Wed Mar 21 09:31:49 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 09:32:08 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 09:32:08 2012] Setting source spectrum file to fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Mar 21 09:32:08 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Wed Mar 21 09:51:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 21 09:51:27 2012] rmf not generated due to insufficient counts
[Wed Mar 21 13:17:14 2012] Updating aperture counts using extracted products
[Wed Mar 21 13:17:14 2012] Error reading totcts from fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Wed Mar 21 13:17:17 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 13:17:17 2012] Using photon index=1.80, rate=0.048, arf fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src9.arf
[Wed Mar 21 13:17:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 13:17:17 2012] Updating source flux to 8.9e-13
[Wed Mar 21 13:17:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Mar 21 13:20:36 2012] xmm0412593201/analysis//spectral/fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete