[Tue Mar 20 10:13:13 2012] Detection parameters:
  Position = (279.2, 118.0) = 5 34 33.58 21 49 9.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 205.6 +/- 22.4
  Background counts = 62.8
  Rate = 0.03 +/- 0.003

[Tue Mar 20 10:13:16 2012] Off-axis axis estimate = 13.15'
[Tue Mar 20 10:17:19 2012] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 10:17:19 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 20 10:17:19 2012] Initial guess for spatial extent in simple fitting = 13.00"
[Tue Mar 20 10:17:19 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.006
[Tue Mar 20 10:17:19 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 13.00"
[Tue Mar 20 16:43:05 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src3.ximg exists
[Tue Mar 20 16:43:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src3.csv
[Tue Mar 20 16:43:05 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src3_1.ximg exists
[Tue Mar 20 16:43:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src3.csv
[Tue Mar 20 16:43:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 16:43:06 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Tue Mar 20 16:43:06 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Tue Mar 20 16:43:06 2012] Fit fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Tue Mar 20 22:50:28 2012] Warning, spatial fit 3 centroid is now closest to src. 5
[Tue Mar 20 22:50:28 2012] Warning: source 4 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 12.283551 pixels away
[Tue Mar 20 22:50:29 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 22:50:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 22:50:29 2012] Assessing source extent using major
[Tue Mar 20 22:50:29 2012] Source does appear to be extended
[Tue Mar 20 22:50:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 22:50:29 2012] Source is confused with source 54
[Tue Mar 20 22:50:29 2012] Source is confused with source 55
[Tue Mar 20 22:51:14 2012] Using EEF radius (= 13.00 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 22:51:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 20 22:51:14 2012] Initial guess for spatial extent in simple fitting = 13.00"
[Tue Mar 20 22:51:14 2012] source mask rpix=3.0, npix_max = 48, mask sum = 49, frac = 1.006
[Tue Mar 20 22:51:14 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 13.00"
[Wed Mar 21 04:07:30 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src3.ximg exists
[Wed Mar 21 04:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src3.csv
[Wed Mar 21 04:07:30 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src3_1.ximg exists
[Wed Mar 21 04:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src3.csv
[Wed Mar 21 04:07:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 04:07:31 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Wed Mar 21 04:07:31 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Wed Mar 21 04:07:31 2012] Fit fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Wed Mar 21 09:28:06 2012] Warning, spatial fit 3 centroid is now closest to src. 53
[Wed Mar 21 09:28:06 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 09:28:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 09:28:06 2012] Assessing source extent using major
[Wed Mar 21 09:28:06 2012] Source does appear to be extended
[Wed Mar 21 09:28:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 09:28:50 2012] XMMSAS src. selection expression = ellipse(24239.822174, 10221.378998, 652.500000, 652.500000, 0.000000, X, Y)
[Wed Mar 21 09:28:50 2012] Writing source region out to fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src4_src.reg
[Wed Mar 21 09:28:50 2012] Extracting stamp from image fullrun_mos1_xmm0412593201_pi300-10000_cl_sm2.00.img.gz, (242, 81) - (317, 156)
[Wed Mar 21 09:28:50 2012] XMMSAS bgd. selection expression = annulus(24239.822174, 10221.378998, 1087.500000, 2175.000000, X, Y) && !ellipse(24215.188812, 11160.692520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24250.763550, 9336.318344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24450.818000, 13204.923400, 1878.544054, 1878.544054, 0.000000, X, Y) && !ellipse(24050.296600, 12086.547604, 1001.896029, 1001.896029, 0.000000, X, Y) && !ellipse(24225.596527, 8044.563622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.794098, 12823.457718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23873.858246, 12564.135696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24656.507782, 12214.903763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25106.649414, 11785.924042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24890.186000, 9959.308200, 1070.408031, 1070.408031, 0.000000, X, Y) && !ellipse(24297.570800, 9700.736000, 2062.360059, 2062.360059, 0.000000, X, Y) && !ellipse(24695.919037, 8577.475128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24710.981018, 7721.958313, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 09:28:50 2012] Writing fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src4.gif
[Wed Mar 21 09:30:15 2012] Mean detx,y = (14323.20, -289.97) 
[Wed Mar 21 09:30:16 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 09:30:23 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 09:30:24 2012] Setting source spectrum file to fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar 21 09:30:24 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Wed Mar 21 09:50:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Wed Mar 21 09:50:36 2012] rmf not generated due to insufficient counts
[Wed Mar 21 13:17:14 2012] Updating aperture counts using extracted products
[Wed Mar 21 13:17:14 2012] Error reading totcts from fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Wed Mar 21 13:17:17 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 13:17:17 2012] Using photon index=1.80, rate=0.0309, arf fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src4.arf
[Wed Mar 21 13:17:17 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 13:17:17 2012] Updating source flux to 8.6e-13
[Wed Mar 21 13:17:31 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Wed Mar 21 13:20:36 2012] xmm0412593201/analysis//spectral/fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete