[Tue Mar 20 10:13:15 2012] Detection parameters:
  Position = (248.0, 201.1) = 5 34 43.34 21 55 10.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 122.3 +/- 24.0
  Background counts = 236.3
  Rate = 0.03 +/- 0.005

[Tue Mar 20 10:13:16 2012] Off-axis axis estimate = 7.95'
[Tue Mar 20 10:17:19 2012] Using EEF radius (= 10.40 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 10:17:19 2012] Initial guess for spatial extent in simple fitting = 10.40"
[Tue Mar 20 10:17:19 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.076
[Tue Mar 20 10:17:19 2012] Giving source the simple spatial ID 34 for pass 0, mean size = 10.40"
[Tue Mar 20 16:43:05 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src34.ximg exists
[Tue Mar 20 16:43:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src34.csv
[Tue Mar 20 16:43:05 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src34_1.ximg exists
[Tue Mar 20 16:43:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src34.csv
[Tue Mar 20 16:43:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 16:43:07 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Tue Mar 20 16:43:07 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Tue Mar 20 16:43:07 2012] Fit fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Tue Mar 20 22:50:29 2012] Spatial fit model total counts = 2685.530000, observed total counts = 2558.000000
[Tue Mar 20 22:50:29 2012] Offset between fit and detection position for source 39 = 2.316861 pixels
[Tue Mar 20 22:50:29 2012] 2781.942000 total counts/ 2090.400000 bgd. counts: snr = 15.125295
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 2.316861 pixels
  Position = (246.0, 202.4) = 5 34 43.95 21 55 15.5
  Extent = 17.8 (12.7-20.8)", rotation angle = 0
  Source counts = 691.5 +/- 52.7
  Background counts = 2090.4
  Rate = 0.1 +/- 0.008
[Tue Mar 20 22:50:29 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 22:50:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 22:50:29 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 22:50:29 2012] Source does appear to be extended
[Tue Mar 20 22:50:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 22:50:29 2012] Source is confused with source 37
[Tue Mar 20 22:51:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 20 22:51:14 2012] Initial guess for spatial extent in simple fitting = 17.82"
[Tue Mar 20 22:51:14 2012] source mask rpix=4.1, npix_max = 84, mask sum = 81, frac = 0.959
[Tue Mar 20 22:51:14 2012] Giving source the simple spatial ID 34 for pass 1, mean size = 17.82"
[Wed Mar 21 04:07:31 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src34.ximg exists
[Wed Mar 21 04:07:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src34.csv
[Wed Mar 21 04:07:31 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src34_1.ximg exists
[Wed Mar 21 04:07:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src34.csv
[Wed Mar 21 04:07:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 04:07:32 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src34.ximg exists
[Wed Mar 21 04:07:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src34.csv
[Wed Mar 21 04:07:32 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src34_1.ximg exists
[Wed Mar 21 04:07:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src34.csv
[Wed Mar 21 04:07:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 09:28:06 2012] Warning, spatial fit 34 centroid is now closest to src. 13
[Wed Mar 21 09:28:06 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 09:28:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 09:28:06 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 09:28:06 2012] Source does appear to be extended
[Wed Mar 21 09:28:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 09:28:52 2012] XMMSAS src. selection expression = ellipse(21354.743000, 17557.227400, 1068.930031, 1068.930031, 0.000000, X, Y)
[Wed Mar 21 09:28:52 2012] Writing source region out to fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src39_src.reg
[Wed Mar 21 09:28:52 2012] Extracting stamp from image fullrun_mos1_xmm0412593201_pi300-10000_cl_sm2.00.img.gz, (185, 141) - (307, 264)
[Wed Mar 21 09:28:52 2012] XMMSAS bgd. selection expression = annulus(21354.743000, 17557.227400, 1781.550051, 3563.100103, X, Y) && !ellipse(24417.371948, 17577.595657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17826.509964, 21617.327606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25077.032562, 17493.570618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23137.000000, 17363.864471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24161.860000, 16923.174000, 1647.600047, 1647.600047, 0.000000, X, Y) && !ellipse(24450.818000, 13204.923400, 1878.544054, 1878.544054, 0.000000, X, Y) && !ellipse(17378.763168, 21170.718491, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21983.230469, 17706.091110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19717.018265, 17451.513626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23869.222565, 17350.026459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24742.875885, 15966.567688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24378.234161, 16055.143448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25348.623474, 15692.265991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24307.022600, 15287.689400, 1036.904030, 1036.904030, 0.000000, X, Y) && !ellipse(25005.184814, 14656.220459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24201.475586, 14301.604126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24775.471680, 13692.821838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24353.876923, 13609.313202, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 09:28:52 2012] Writing fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src39.gif
[Wed Mar 21 09:43:50 2012] Mean detx,y = (7303.20, 2821.01) 
[Wed Mar 21 09:43:53 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 09:44:33 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 09:44:33 2012] Setting source spectrum file to fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Wed Mar 21 09:44:33 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Wed Mar 21 13:17:16 2012] Updating aperture counts using extracted products
[Wed Mar 21 13:17:16 2012] Error reading totcts from fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Wed Mar 21 13:17:19 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 13:17:19 2012] Using photon index=1.80, rate=0.105, arf fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src39.arf
[Wed Mar 21 13:17:19 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 13:17:19 2012] Updating source flux to 1.6e-12
[Wed Mar 21 13:17:31 2012] Flag c found in src. 39 procflags, skipping spectral fitting