[Tue Mar 20 10:13:14 2012] Detection parameters:
  Position = (285.0, 149.9) = 5 34 31.76 21 51 27.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 152.4 +/- 21.6
  Background counts = 99.3
  Rate = 0.02 +/- 0.003

[Tue Mar 20 10:13:16 2012] Off-axis axis estimate = 10.81'
[Tue Mar 20 10:17:19 2012] Using EEF radius (= 11.83 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 10:17:19 2012] Initial guess for spatial extent in simple fitting = 11.83"
[Tue Mar 20 10:17:19 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.868
[Tue Mar 20 10:17:19 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 11.83"
[Tue Mar 20 16:43:05 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src10.ximg exists
[Tue Mar 20 16:43:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src10.csv
[Tue Mar 20 16:43:05 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src10_1.ximg exists
[Tue Mar 20 16:43:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src10.csv
[Tue Mar 20 16:43:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 16:43:07 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Tue Mar 20 16:43:07 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Tue Mar 20 16:43:07 2012] Fit fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Tue Mar 20 22:50:29 2012] Spatial fit model total counts = 2060.050000, observed total counts = 2055.000000
[Tue Mar 20 22:50:29 2012] Offset between fit and detection position for source 15 = 4.159109 pixels
[Tue Mar 20 22:50:29 2012] 1984.140000 total counts/ 1639.570000 bgd. counts: snr = 8.509665
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 4.159109 pixels
  Position = (281.6, 152.3) = 5 34 32.82 21 51 38.0
  Extent = 23.5 (23.1-23.7)", rotation angle = 0
  Source counts = 344.6 +/- 44.5
  Background counts = 1639.6
  Rate = 0.05 +/- 0.007
[Tue Mar 20 22:50:29 2012] Source 15 is offset by -1.707816 and 1.646959 pixels which is larger than
2 X fitted extent = 1.408685 x 1.408685, not incorporating fit results
[Tue Mar 20 22:50:29 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 22:50:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 22:50:29 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 22:50:29 2012] Source does appear to be extended
[Tue Mar 20 22:50:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 22:50:29 2012] Source is confused with source 16
[Tue Mar 20 22:50:29 2012] Source is confused with source 46
[Tue Mar 20 22:50:29 2012] Source is confused with source 48
[Tue Mar 20 22:50:29 2012] Source is confused with source 49
[Tue Mar 20 22:50:29 2012] Source is confused with source 50
[Tue Mar 20 22:50:29 2012] Source is confused with source 51
[Tue Mar 20 22:50:29 2012] Source is confused with source 52
[Tue Mar 20 22:51:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 20 22:51:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 20 22:51:14 2012] Initial guess for spatial extent in simple fitting = 23.48"
[Tue Mar 20 22:51:14 2012] source mask rpix=5.4, npix_max = 139, mask sum = 132, frac = 0.949
[Tue Mar 20 22:51:14 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 23.48"
[Wed Mar 21 04:07:30 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src10.ximg exists
[Wed Mar 21 04:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src10.csv
[Wed Mar 21 04:07:30 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src10_1.ximg exists
[Wed Mar 21 04:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src10.csv
[Wed Mar 21 04:07:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 04:07:31 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Wed Mar 21 04:07:31 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Wed Mar 21 04:07:31 2012] Fit fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Wed Mar 21 09:28:06 2012] Warning, spatial fit 10 centroid is now closest to src. 53
[Wed Mar 21 09:28:06 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 09:28:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 09:28:06 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 09:28:06 2012] Source does appear to be extended
[Wed Mar 21 09:28:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 09:28:51 2012] XMMSAS src. selection expression = ellipse(24450.818000, 13204.923400, 1408.908041, 1408.908041, 0.000000, X, Y)
[Wed Mar 21 09:28:51 2012] Writing source region out to fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src15_src.reg
[Wed Mar 21 09:28:51 2012] Extracting stamp from image fullrun_mos1_xmm0412593201_pi300-10000_cl_sm2.00.img.gz, (201, 71) - (363, 233)
[Wed Mar 21 09:28:51 2012] XMMSAS bgd. selection expression = annulus(24450.818000, 13204.923400, 2348.180068, 4696.360135, X, Y) && !ellipse(24417.371948, 17577.595657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24215.188812, 11160.692520, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24239.822174, 10221.378998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24250.763550, 9336.318344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25077.032562, 17493.570618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23137.000000, 17363.864471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24161.860000, 16923.174000, 1647.600047, 1647.600047, 0.000000, X, Y) && !ellipse(24050.296600, 12086.547604, 1001.896029, 1001.896029, 0.000000, X, Y) && !ellipse(24225.596527, 8044.563622, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21983.230469, 17706.091110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19717.018265, 17451.513626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21354.743000, 17557.227400, 1425.240041, 1425.240041, 0.000000, X, Y) && !ellipse(23869.222565, 17350.026459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24742.875885, 15966.567688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24378.234161, 16055.143448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25348.623474, 15692.265991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24307.022600, 15287.689400, 1036.904030, 1036.904030, 0.000000, X, Y) && !ellipse(25005.184814, 14656.220459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24201.475586, 14301.604126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24775.471680, 13692.821838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24353.876923, 13609.313202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.794098, 12823.457718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23873.858246, 12564.135696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24656.507782, 12214.903763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25106.649414, 11785.924042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24890.186000, 9959.308200, 1070.408031, 1070.408031, 0.000000, X, Y) && !ellipse(24297.570800, 9700.736000, 2062.360059, 2062.360059, 0.000000, X, Y) && !ellipse(24695.919037, 8577.475128, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24710.981018, 7721.958313, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 09:28:51 2012] Writing fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src15.gif
[Wed Mar 21 09:34:38 2012] Mean detx,y = (11282.48, -356.33) 
[Wed Mar 21 09:34:39 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 09:34:55 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 09:34:55 2012] Setting source spectrum file to fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Mar 21 09:34:55 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Wed Mar 21 13:17:14 2012] Updating aperture counts using extracted products
[Wed Mar 21 13:17:14 2012] Error reading totcts from fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Wed Mar 21 13:17:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 13:17:18 2012] Using photon index=1.80, rate=0.0522, arf fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src15.arf
[Wed Mar 21 13:17:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 13:17:18 2012] Updating source flux to 9.7e-13
[Wed Mar 21 13:17:31 2012] Flag b found in src. 15 procflags, skipping spectral fitting
[Wed Mar 21 13:17:31 2012] Flag c found in src. 15 procflags, skipping spectral fitting