[Tue Mar 20 10:13:13 2012] Detection parameters:
  Position = (277.0, 193.1) = 5 34 34.27 21 54 35.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 255.2 +/- 30.1
  Background counts = 236.6
  Rate = 0.06 +/- 0.007

[Tue Mar 20 10:13:16 2012] Off-axis axis estimate = 7.80'
[Tue Mar 20 10:17:19 2012] Using EEF radius (= 10.33 ")to estimate initial spatial extent for simple fitting
[Tue Mar 20 10:17:19 2012] Initial guess for spatial extent in simple fitting = 10.33"
[Tue Mar 20 10:17:19 2012] source mask rpix=2.4, npix_max = 33, mask sum = 36, frac = 1.090
[Tue Mar 20 10:17:19 2012] Giving source the simple spatial ID 9 for pass 0, mean size = 10.33"
[Tue Mar 20 16:43:05 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src9.ximg exists
[Tue Mar 20 16:43:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src9.csv
[Tue Mar 20 16:43:05 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src9_1.ximg exists
[Tue Mar 20 16:43:05 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src9.csv
[Tue Mar 20 16:43:05 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Mar 20 16:43:07 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Tue Mar 20 16:43:07 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Tue Mar 20 16:43:07 2012] Fit fullrun_mos1_xmm0412593201_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Tue Mar 20 22:50:29 2012] Warning, spatial fit 9 centroid is now closest to src. 13
[Tue Mar 20 22:50:29 2012] Spatial fit model total counts = 3291.350000, observed total counts = 3286.000000
[Tue Mar 20 22:50:29 2012] Offset between fit and detection position for source 14 = 3.212594 pixels
[Tue Mar 20 22:50:29 2012] Warning, changing simple spatial fit ID from 9 to 37
[Tue Mar 20 22:50:29 2012] 3248.649000 total counts/ 2900.050000 bgd. counts: snr = 6.473265
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 3.212594 pixels
  Position = (278.8, 195.7) = 5 34 33.70 21 54 46.7
  Extent = 21.2 (21.1-21.2)", rotation angle = 0
  Source counts = 348.6 +/- 57.0
  Background counts = 2900.1
  Rate = 0.05 +/- 0.009
[Tue Mar 20 22:50:29 2012] Vigneting correction estimate = 1.000000
[Tue Mar 20 22:50:29 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Mar 20 22:50:29 2012] Assessing source extent using major axis lower bound
[Tue Mar 20 22:50:29 2012] Source does appear to be extended
[Tue Mar 20 22:50:29 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Mar 20 22:50:29 2012] Source is confused with source 2
[Tue Mar 20 22:51:14 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Mar 20 22:51:14 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Mar 20 22:51:14 2012] Initial guess for spatial extent in simple fitting = 21.17"
[Tue Mar 20 22:51:14 2012] source mask rpix=4.9, npix_max = 115, mask sum = 121, frac = 1.051
[Tue Mar 20 22:51:14 2012] Giving source the simple spatial ID 9 for pass 1, mean size = 21.17"
[Wed Mar 21 04:07:30 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src9.ximg exists
[Wed Mar 21 04:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src9.csv
[Wed Mar 21 04:07:30 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src9_1.ximg exists
[Wed Mar 21 04:07:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src9.csv
[Wed Mar 21 04:07:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 04:07:31 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Wed Mar 21 04:07:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Mar 21 04:07:31 2012] fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Wed Mar 21 04:07:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src9.csv
[Wed Mar 21 04:07:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593201_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 21 09:28:06 2012] Warning, spatial fit 9 centroid is now closest to src. 2
[Wed Mar 21 09:28:06 2012] Source 14 is offset by 0.935416 and 4.263149 pixels which is larger than
2 X fitted extent = 1.269246 x 1.218694, not incorporating fit results
[Wed Mar 21 09:28:06 2012] Spatial fit model total counts = 3285.100000, observed total counts = 3286.000000
[Wed Mar 21 09:28:06 2012] Offset between fit and detection position for source 14 = 0.824714 pixels
[Wed Mar 21 09:28:06 2012] Warning, changing simple spatial fit ID from 9 to 37
[Wed Mar 21 09:28:06 2012] 3088.289000 total counts/ 2784.580000 bgd. counts: snr = 5.755430
Spatial fit parameters:
  Offset between fit and detection position for source 14 = 0.824714 pixels
  Position = (278.3, 195.1) = 5 34 33.86 21 54 43.9
  Extent = 20.6 (19.4-21.2)", rotation angle = 0
  Source counts = 303.7 +/- 55.6
  Background counts = 2784.6
  Rate = 0.05 +/- 0.008
[Wed Mar 21 09:28:06 2012] Vigneting correction estimate = 1.000000
[Wed Mar 21 09:28:06 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 21 09:28:06 2012] Assessing source extent using major axis lower bound
[Wed Mar 21 09:28:06 2012] Source does appear to be extended
[Wed Mar 21 09:28:06 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 21 09:28:51 2012] XMMSAS src. selection expression = ellipse(24161.860000, 16923.174000, 1235.700036, 1235.700036, 0.000000, X, Y)
[Wed Mar 21 09:28:51 2012] Writing source region out to fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src14_src.reg
[Wed Mar 21 09:28:51 2012] Extracting stamp from image fullrun_mos1_xmm0412593201_pi300-10000_cl_sm2.00.img.gz, (207, 124) - (349, 266)
[Wed Mar 21 09:28:51 2012] XMMSAS bgd. selection expression = annulus(24161.860000, 16923.174000, 2059.500059, 4119.000119, X, Y) && !ellipse(24417.371948, 17577.595657, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25077.032562, 17493.570618, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23137.000000, 17363.864471, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24450.818000, 13204.923400, 1878.544054, 1878.544054, 0.000000, X, Y) && !ellipse(24050.296600, 12086.547604, 1001.896029, 1001.896029, 0.000000, X, Y) && !ellipse(21983.230469, 17706.091110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19717.018265, 17451.513626, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21354.743000, 17557.227400, 1425.240041, 1425.240041, 0.000000, X, Y) && !ellipse(23869.222565, 17350.026459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24742.875885, 15966.567688, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24378.234161, 16055.143448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25348.623474, 15692.265991, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24307.022600, 15287.689400, 1036.904030, 1036.904030, 0.000000, X, Y) && !ellipse(25005.184814, 14656.220459, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24201.475586, 14301.604126, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24775.471680, 13692.821838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24353.876923, 13609.313202, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24330.794098, 12823.457718, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23873.858246, 12564.135696, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24656.507782, 12214.903763, 870.000000, 870.000000, 0.000000, X, Y)
[Wed Mar 21 09:28:51 2012] Writing fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src14.gif
[Wed Mar 21 09:33:58 2012] Mean detx,y = (7614.86, -27.68) 
[Wed Mar 21 09:34:00 2012] Setting backscal keywords in source and bgd. spectrum
[Wed Mar 21 09:34:28 2012] Binned source spectrum to 10 counts/bin
[Wed Mar 21 09:34:29 2012] Setting source spectrum file to fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Mar 21 09:34:29 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Wed Mar 21 13:17:14 2012] Updating aperture counts using extracted products
[Wed Mar 21 13:17:14 2012] Error reading totcts from fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Wed Mar 21 13:17:18 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 13:17:18 2012] Using photon index=1.80, rate=0.046, arf fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src14.arf
[Wed Mar 21 13:17:18 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 13:17:18 2012] Updating source flux to 6.7e-13
[Wed Mar 21 13:17:31 2012] Flag b found in src. 14 procflags, skipping spectral fitting
[Wed Mar 21 13:17:31 2012] Flag c found in src. 14 procflags, skipping spectral fitting
[Wed Mar 21 13:20:36 2012] Reading fit data from xmm0412593201/analysis//spectral/fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src14_pl.csv
[Wed Mar 21 13:20:36 2012] Spectral fit parameter nH value = 2.17095e+21
[Wed Mar 21 13:20:36 2012] Spectral fit parameter PhoIndex value = 2.18207
[Wed Mar 21 13:20:36 2012] Failed to get F(0.3-8.0) from xmm0412593201/analysis//spectral/fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src14_pl.csv, possibly due to different flux energy range selected
[Wed Mar 21 13:20:36 2012] Calculating source flux in energy range 0.30-8.00
[Wed Mar 21 13:20:36 2012] Using Nh = 2.2e+21, photon index=2.18, rate=0.046, arf fullrun_mos1_xmm0412593201_pi300-10000_pass1_cl_src14.arf
[Wed Mar 21 13:20:36 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Wed Mar 21 13:20:36 2012] Updating source flux to 6.3e-13