[Wed Mar 28 10:12:15 2012] Detection parameters:
  Position = (277.2, 165.0) = 5 34 34.21 21 52 32.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 151.8 +/- 20.3
  Background counts = 78.0
  Rate = 0.03 +/- 0.005

[Wed Mar 28 10:12:15 2012] Off-axis axis estimate = 9.79'
[Wed Mar 28 14:27:30 2012] Using EEF radius (= 11.33 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 14:27:30 2012] Initial guess for spatial extent in simple fitting = 11.33"
[Wed Mar 28 14:27:30 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.934
[Wed Mar 28 14:27:30 2012] Giving source the simple spatial ID 53 for pass 0, mean size = 11.33"
[Wed Mar 28 21:10:27 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src53.ximg exists
[Wed Mar 28 21:10:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src53.csv
[Wed Mar 28 21:10:27 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src53_1.ximg exists
[Wed Mar 28 21:10:27 2012] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src53.csv
[Wed Mar 28 21:10:27 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src53_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src53.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 21:10:29 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_tfrozen_src53.ximg exists
[Wed Mar 28 21:10:29 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_tfrozen_src53_1.ximg exists
[Wed Mar 28 21:10:29 2012] Fit fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_tfrozen_src53 appears to have run properly
[Wed Mar 28 21:11:09 2012] Warning, spatial fit 53 centroid is now closest to src. 16
[Wed Mar 28 21:11:09 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 21:11:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 21:11:09 2012] Assessing source extent using major
[Wed Mar 28 21:11:09 2012] Source does appear to be extended
[Wed Mar 28 21:11:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 21:11:09 2012] Source is confused with source 71
[Wed Mar 28 21:11:09 2012] Source is confused with source 69
[Thu Mar 29 01:29:37 2012] Using EEF radius (= 11.33 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 01:29:37 2012] Initial guess for spatial extent in simple fitting = 11.33"
[Thu Mar 29 01:29:37 2012] source mask rpix=2.6, npix_max = 38, mask sum = 36, frac = 0.934
[Thu Mar 29 01:29:37 2012] Giving source the simple spatial ID 48 for pass 1, mean size = 11.33"
[Thu Mar 29 07:51:15 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src48.ximg exists
[Thu Mar 29 07:51:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src48.csv
[Thu Mar 29 07:51:15 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src48_1.ximg exists
[Thu Mar 29 07:51:15 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src48.csv
[Thu Mar 29 07:51:15 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 07:51:17 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Thu Mar 29 07:51:17 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Thu Mar 29 07:51:17 2012] Fit fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_tfrozen_src48 appears to have run properly
[Thu Mar 29 07:51:50 2012] Spatial fit model total counts = 1542.080000, observed total counts = 1558.000000
[Thu Mar 29 07:51:50 2012] Offset between fit and detection position for source 70 = 1.947995 pixels
[Thu Mar 29 07:51:50 2012] 1328.604800 total counts/ 1250.810000 bgd. counts: snr = 2.199657
Spatial fit parameters:
  Offset between fit and detection position for source 70 = 1.947995 pixels
  Position = (275.5, 165.8) = 5 34 34.77 21 52 36.2
  Extent = 8.4 (5.1-22.1)", rotation angle = 0
  Source counts = 77.8 +/- 36.5
  Background counts = 1250.8
  Rate = 0.02 +/- 0.008
[Thu Mar 29 07:51:50 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 07:51:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 07:51:50 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 07:51:50 2012] Source does appear to be extended
[Thu Mar 29 07:51:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 09:29:28 2012] XMMSAS src. selection expression = ellipse(23916.172600, 14375.258040, 504.222615, 504.222615, 0.000000, X, Y)
[Thu Mar 29 09:29:28 2012] Writing source region out to fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src70_src.reg
[Thu Mar 29 09:29:28 2012] Extracting stamp from image fullrun_mos2_xmm0412593101_pi300-10000_cl_sm2.00.img.gz, (246, 137) - (304, 195)
[Thu Mar 29 09:29:28 2012] XMMSAS bgd. selection expression = annulus(23916.172600, 14375.258040, 840.371024, 1680.742048, X, Y) && !ellipse(24979.132000, 17006.880000, 1239.360036, 1239.360036, 0.000000, X, Y) && !ellipse(24816.626000, 14987.482000, 2129.560061, 349.260010, 4.933000, X, Y) && !ellipse(24519.723328, 15791.014496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24227.700000, 9484.944000, 4391.008126, 2457.408071, 94.579000, X, Y) && !ellipse(24582.435120, 12915.340317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.218000, 12248.934000, 1464.544042, 239.168007, 3.922000, X, Y) && !ellipse(23813.105400, 15609.818000, 858.528025, 858.528025, 0.000000, X, Y) && !ellipse(24686.626434, 16295.557678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23971.303131, 14982.543472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23822.590986, 13692.053467, 1848.128053, 932.417403, 76.339546, X, Y) && !ellipse(24581.351868, 14221.781998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25361.449921, 14307.305801, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 29 09:29:28 2012] Writing fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src70.gif
[Thu Mar 29 09:59:41 2012] Mean detx,y = (-305.94, 9995.97) 
[Thu Mar 29 09:59:43 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 10:00:02 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 10:00:03 2012] Setting source spectrum file to fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Thu Mar 29 10:00:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src70_bgd.pi.gz
[Thu Mar 29 11:33:24 2012] Not generating rmf since there are only 77 counts
[Thu Mar 29 11:33:24 2012] rmf not generated due to insufficient counts
[Thu Mar 29 11:48:05 2012] Updating aperture counts using extracted products
[Thu Mar 29 11:48:05 2012] Error reading totcts from fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src70_src_b10.pi.gz
[Thu Mar 29 11:48:09 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 11:48:09 2012] Using photon index=1.80, rate=0.0179, arf fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src70.arf
[Thu Mar 29 11:48:09 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 11:48:09 2012] Updating source flux to 4.5e-13
[Thu Mar 29 11:53:22 2012] Flag c found in src. 70 procflags, skipping spectral fitting
[Thu Mar 29 11:53:22 2012] Source 70 has fewer than 100.000000 counts, skipping spectral fitting