[Wed Mar 28 10:12:12 2012] Detection parameters:
  Position = (281.1, 133.1) = 5 34 33.00 21 50 13.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 287.9 +/- 23.6
  Background counts = 42.5
  Rate = 0.07 +/- 0.005

[Wed Mar 28 10:12:15 2012] Off-axis axis estimate = 12.06'
[Wed Mar 28 14:27:30 2012] Using EEF radius (= 12.46 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 14:27:30 2012] Initial guess for spatial extent in simple fitting = 12.46"
[Wed Mar 28 14:27:30 2012] source mask rpix=2.9, npix_max = 45, mask sum = 36, frac = 0.796
[Wed Mar 28 14:27:30 2012] Giving source the simple spatial ID 15 for pass 0, mean size = 12.46"
[Wed Mar 28 21:10:26 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src15.ximg exists
[Wed Mar 28 21:10:26 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src15_1.ximg exists
[Wed Mar 28 21:10:26 2012] Fit fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src15 appears to have run properly
[Wed Mar 28 21:10:28 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_tfrozen_src15.ximg exists
[Wed Mar 28 21:10:28 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_tfrozen_src15_1.ximg exists
[Wed Mar 28 21:10:28 2012] Fit fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_tfrozen_src15 appears to have run properly
[Wed Mar 28 21:11:09 2012] Spatial fit model total counts = 1560.640000, observed total counts = 1547.000000
[Wed Mar 28 21:11:09 2012] Offset between fit and detection position for source 6 = 0.582249 pixels
[Wed Mar 28 21:11:09 2012] 1458.907500 total counts/ 1367.640000 bgd. counts: snr = 2.467915
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.582249 pixels
  Position = (281.7, 133.0) = 5 34 32.82 21 50 13.7
  Extent = 7.8 (4.5-16.5)", rotation angle = 0
  Source counts = 91.3 +/- 38.2
  Background counts = 1367.6
  Rate = 0.02 +/- 0.009
[Wed Mar 28 21:11:09 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 21:11:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 21:11:09 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 21:11:09 2012] Source does appear to be extended
[Wed Mar 28 21:11:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 21:11:09 2012] Source is confused with source 5
[Wed Mar 28 21:11:09 2012] Source is confused with source 20
[Wed Mar 28 21:11:09 2012] Source is confused with source 19
[Wed Mar 28 21:11:09 2012] Source is confused with source 18
[Thu Mar 29 01:29:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 01:29:37 2012] Initial guess for spatial extent in simple fitting = 7.80"
[Thu Mar 29 01:29:37 2012] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.950
[Thu Mar 29 01:29:37 2012] Giving source the simple spatial ID 14 for pass 1, mean size = 7.80"
[Thu Mar 29 07:51:14 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src14.ximg exists
[Thu Mar 29 07:51:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src14.csv
[Thu Mar 29 07:51:14 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src14_1.ximg exists
[Thu Mar 29 07:51:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src14.csv
[Thu Mar 29 07:51:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 07:51:16 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Thu Mar 29 07:51:16 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Thu Mar 29 07:51:16 2012] Fit fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_tfrozen_src14 appears to have run properly
[Thu Mar 29 07:51:50 2012] Spatial fit model total counts = 1428.780000, observed total counts = 1409.000000
[Thu Mar 29 07:51:50 2012] Offset between fit and detection position for source 6 = 0.150606 pixels
[Thu Mar 29 07:51:50 2012] 1326.356700 total counts/ 1240.790000 bgd. counts: snr = 2.429157
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.150606 pixels
  Position = (281.7, 133.2) = 5 34 32.81 21 50 14.4
  Extent = 7.4 (4.4-12.7)", rotation angle = 0
  Source counts = 85.6 +/- 36.4
  Background counts = 1240.8
  Rate = 0.02 +/- 0.008
[Thu Mar 29 07:51:50 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 07:51:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 07:51:50 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 07:51:50 2012] Source does appear to be extended
[Thu Mar 29 07:51:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 09:29:26 2012] XMMSAS src. selection expression = ellipse(24460.717400, 11539.567800, 446.988013, 446.988013, 0.000000, X, Y)
[Thu Mar 29 09:29:26 2012] Writing source region out to fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src6_src.reg
[Thu Mar 29 09:29:26 2012] Extracting stamp from image fullrun_mos2_xmm0412593101_pi300-10000_cl_sm2.00.img.gz, (256, 108) - (307, 159)
[Thu Mar 29 09:29:26 2012] XMMSAS bgd. selection expression = annulus(24460.717400, 11539.567800, 744.980021, 1489.960043, X, Y) && !ellipse(24816.626000, 14987.482000, 2129.560061, 349.260010, 4.933000, X, Y) && !ellipse(24227.700000, 9484.944000, 4391.008126, 2457.408071, 94.579000, X, Y) && !ellipse(24582.435120, 12915.340317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24514.974000, 10522.896000, 1075.328031, 1075.328031, 0.000000, X, Y) && !ellipse(24604.218000, 12248.934000, 1464.544042, 239.168007, 3.922000, X, Y) && !ellipse(24335.751038, 10136.637764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24449.123444, 10999.839561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23822.590986, 13692.053467, 1848.128053, 932.417403, 76.339546, X, Y) && !ellipse(24698.581400, 10203.706000, 1340.120039, 1340.120039, 0.000000, X, Y) && !ellipse(23774.114600, 9462.052000, 2194.272063, 2194.272063, 0.000000, X, Y) && !ellipse(23854.038000, 11498.222000, 1087.032031, 408.608012, 90.000000, X, Y) && !ellipse(23783.782000, 9110.834000, 2195.504063, 2195.504063, 0.000000, X, Y) && !ellipse(23883.594238, 10390.965012, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 29 09:29:26 2012] Writing fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src6.gif
[Thu Mar 29 09:45:17 2012] Mean detx,y = (361.53, 12797.60) 
[Thu Mar 29 09:45:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 09:45:28 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 09:45:29 2012] Setting source spectrum file to fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Mar 29 09:45:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Thu Mar 29 10:41:20 2012] Not generating rmf since there are only 85 counts
[Thu Mar 29 10:41:20 2012] rmf not generated due to insufficient counts
[Thu Mar 29 11:48:02 2012] Updating aperture counts using extracted products
[Thu Mar 29 11:48:02 2012] Error reading totcts from fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Thu Mar 29 11:48:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 11:48:07 2012] Using photon index=1.80, rate=0.0196, arf fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src6.arf
[Thu Mar 29 11:48:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 11:48:07 2012] Updating source flux to 8.3e-13
[Thu Mar 29 11:53:22 2012] Flag c found in src. 6 procflags, skipping spectral fitting
[Thu Mar 29 11:53:22 2012] Source 6 has fewer than 100.000000 counts, skipping spectral fitting