[Wed Mar 28 10:12:12 2012] Detection parameters:
  Position = (282.2, 141.2) = 5 34 32.67 21 50 49.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 259.8 +/- 22.9
  Background counts = 39.0
  Rate = 0.06 +/- 0.005

[Wed Mar 28 10:12:15 2012] Off-axis axis estimate = 11.46'
[Wed Mar 28 14:27:30 2012] Using EEF radius (= 12.16 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 14:27:30 2012] Initial guess for spatial extent in simple fitting = 12.16"
[Wed Mar 28 14:27:30 2012] source mask rpix=2.8, npix_max = 43, mask sum = 36, frac = 0.829
[Wed Mar 28 14:27:30 2012] Giving source the simple spatial ID 21 for pass 0, mean size = 12.16"
[Wed Mar 28 21:10:26 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src21.ximg exists
[Wed Mar 28 21:10:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src21.csv
[Wed Mar 28 21:10:26 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src21_1.ximg exists
[Wed Mar 28 21:10:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src21.csv
[Wed Mar 28 21:10:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 21:10:28 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_tfrozen_src21.ximg exists
[Wed Mar 28 21:10:28 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_tfrozen_src21_1.ximg exists
[Wed Mar 28 21:10:28 2012] Fit fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_tfrozen_src21 appears to have run properly
[Wed Mar 28 21:11:09 2012] Warning, spatial fit 21 centroid is now closest to src. 20
[Wed Mar 28 21:11:09 2012] Warning: source 31 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.603985 pixels away
[Wed Mar 28 21:11:09 2012] Source 5 is offset by -4.223083 and 0.545028 pixels which is larger than
2 X fitted extent = 1.360115 x 1.360115, not incorporating fit results
[Wed Mar 28 21:11:09 2012] Spatial fit model total counts = 1216.910000, observed total counts = 1175.000000
[Wed Mar 28 21:11:09 2012] Offset between fit and detection position for source 5 = 1.220944 pixels
[Wed Mar 28 21:11:09 2012] Warning, changing simple spatial fit ID from 21 to 68
[Wed Mar 28 21:11:09 2012] 1137.849400 total counts/ 1073.860000 bgd. counts: snr = 1.952694
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 1.220944 pixels
  Position = (283.4, 141.3) = 5 34 32.30 21 50 49.9
  Extent = 18.3 (17.7-18.6)" x 3.0 (2.3-4.7)", rotation angle = 4 (356-11) degrees
  Source counts = 64.0 +/- 33.7
  Background counts = 1073.9
  Rate = 0.01 +/- 0.008
[Wed Mar 28 21:11:09 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 21:11:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 21:11:09 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 21:11:09 2012] Source does appear to be extended
[Wed Mar 28 21:11:09 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.72
[Wed Mar 28 21:11:09 2012] Source is asymmetric
[Wed Mar 28 21:11:09 2012] Source is confused with source 6
[Thu Mar 29 01:29:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 01:29:37 2012] Initial guess for spatial extent in simple fitting = 10.65"
[Thu Mar 29 01:29:37 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.036
[Thu Mar 29 01:29:37 2012] Giving source the simple spatial ID 20 for pass 1, mean size = 10.65"
[Thu Mar 29 07:51:14 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src20.ximg exists
[Thu Mar 29 07:51:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src20.csv
[Thu Mar 29 07:51:14 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src20_1.ximg exists
[Thu Mar 29 07:51:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src20.csv
[Thu Mar 29 07:51:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src20_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src20.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 07:51:16 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_tfrozen_src20.ximg exists
[Thu Mar 29 07:51:16 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_tfrozen_src20_1.ximg exists
[Thu Mar 29 07:51:16 2012] Fit fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_tfrozen_src20 appears to have run properly
[Thu Mar 29 07:51:50 2012] Warning, spatial fit 20 centroid is now closest to src. 18
[Thu Mar 29 07:51:50 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 07:51:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 07:51:50 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 07:51:50 2012] Source does appear to be extended
[Thu Mar 29 07:51:50 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 3.72
[Thu Mar 29 07:51:50 2012] Source is asymmetric
[Thu Mar 29 09:29:26 2012] XMMSAS src. selection expression = ellipse(24604.218000, 12248.934000, 1098.408032, 179.376005, 3.922000, X, Y)
[Thu Mar 29 09:29:26 2012] Writing source region out to fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src5_src.reg
[Thu Mar 29 09:29:26 2012] Extracting stamp from image fullrun_mos2_xmm0412593101_pi300-10000_cl_sm2.00.img.gz, (220, 78) - (346, 204)
[Thu Mar 29 09:29:26 2012] XMMSAS bgd. selection expression = annulus(24604.218000, 12248.934000, 1830.680053, 3661.360105, X, Y) && !ellipse(24979.132000, 17006.880000, 1239.360036, 1239.360036, 0.000000, X, Y) && !ellipse(24816.626000, 14987.482000, 2129.560061, 349.260010, 4.933000, X, Y) && !ellipse(24519.723328, 15791.014496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24227.700000, 9484.944000, 4391.008126, 2457.408071, 94.579000, X, Y) && !ellipse(24460.717400, 11539.567800, 595.984017, 595.984017, 0.000000, X, Y) && !ellipse(24582.435120, 12915.340317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24514.974000, 10522.896000, 1075.328031, 1075.328031, 0.000000, X, Y) && !ellipse(23813.105400, 15609.818000, 858.528025, 858.528025, 0.000000, X, Y) && !ellipse(24686.626434, 16295.557678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24335.751038, 10136.637764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24485.805328, 8828.555275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24478.849152, 7913.060020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24449.123444, 10999.839561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24617.187000, 8574.238000, 1266.032036, 1266.032036, 0.000000, X, Y) && !ellipse(23971.303131, 14982.543472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23822.590986, 13692.053467, 1848.128053, 932.417403, 76.339546, X, Y) && !ellipse(24698.581400, 10203.706000, 1340.120039, 1340.120039, 0.000000, X, Y) && !ellipse(24581.351868, 14221.781998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23774.114600, 9462.052000, 2194.272063, 2194.272063, 0.000000, X, Y) && !ellipse(25361.449921, 14307.305801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23916.172600, 14375.258040, 672.296819, 672.296819, 0.000000, X, Y) && !ellipse(23854.038000, 11498.222000, 1087.032031, 408.608012, 90.000000, X, Y) && !ellipse(23783.782000, 9110.834000, 2195.504063, 2195.504063, 0.000000, X, Y) && !ellipse(23883.594238, 10390.965012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23831.608765, 8554.641876, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 29 09:29:26 2012] Writing fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src5.gif
[Thu Mar 29 09:47:38 2012] Mean detx,y = (415.45, 12090.65) 
[Thu Mar 29 09:47:40 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 09:47:54 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 09:47:54 2012] Setting source spectrum file to fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Mar 29 09:47:54 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Thu Mar 29 10:54:51 2012] Not generating rmf since there are only 63 counts
[Thu Mar 29 10:54:51 2012] rmf not generated due to insufficient counts
[Thu Mar 29 11:48:03 2012] Updating aperture counts using extracted products
[Thu Mar 29 11:48:03 2012] Error reading totcts from fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Thu Mar 29 11:48:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 11:48:07 2012] Using photon index=1.80, rate=0.0147, arf fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src5.arf
[Thu Mar 29 11:48:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 11:48:07 2012] Updating source flux to 5e-13
[Thu Mar 29 11:53:22 2012] Flag b found in src. 5 procflags, skipping spectral fitting
[Thu Mar 29 11:53:22 2012] Flag c found in src. 5 procflags, skipping spectral fitting
[Thu Mar 29 11:53:22 2012] Source 5 has fewer than 100.000000 counts, skipping spectral fitting