[Wed Mar 28 10:12:12 2012] Detection parameters:
  Position = (283.1, 149.0) = 5 34 32.38 21 51 23.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 286.4 +/- 24.6
  Background counts = 54.6
  Rate = 0.07 +/- 0.006

[Wed Mar 28 10:12:15 2012] Off-axis axis estimate = 10.89'
[Wed Mar 28 14:27:30 2012] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 14:27:30 2012] Initial guess for spatial extent in simple fitting = 11.87"
[Wed Mar 28 14:27:30 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.863
[Wed Mar 28 14:27:30 2012] Giving source the simple spatial ID 16 for pass 0, mean size = 11.87"
[Wed Mar 28 21:10:26 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src16.ximg exists
[Wed Mar 28 21:10:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src16.csv
[Wed Mar 28 21:10:26 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src16_1.ximg exists
[Wed Mar 28 21:10:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src16.csv
[Wed Mar 28 21:10:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 21:10:28 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Wed Mar 28 21:10:28 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Wed Mar 28 21:10:28 2012] Fit fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Wed Mar 28 21:11:09 2012] Warning, spatial fit 16 centroid is now closest to src. 71
[Wed Mar 28 21:11:09 2012] Warning: source 23 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 4 at 11.126562 pixels away
[Wed Mar 28 21:11:09 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 21:11:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 21:11:09 2012] Assessing source extent using major
[Wed Mar 28 21:11:09 2012] Source does appear to be extended
[Wed Mar 28 21:11:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 21:11:09 2012] Source is confused with source 5
[Wed Mar 28 21:11:09 2012] Source is confused with source 71
[Thu Mar 29 01:29:37 2012] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Thu Mar 29 01:29:37 2012] Initial guess for spatial extent in simple fitting = 11.87"
[Thu Mar 29 01:29:37 2012] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.863
[Thu Mar 29 01:29:37 2012] Giving source the simple spatial ID 15 for pass 1, mean size = 11.87"
[Thu Mar 29 07:51:14 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src15.ximg exists
[Thu Mar 29 07:51:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src15.csv
[Thu Mar 29 07:51:14 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src15_1.ximg exists
[Thu Mar 29 07:51:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src15.csv
[Thu Mar 29 07:51:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src15_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src15.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 07:51:16 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_tfrozen_src15.ximg exists
[Thu Mar 29 07:51:16 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_tfrozen_src15_1.ximg exists
[Thu Mar 29 07:51:16 2012] Fit fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_tfrozen_src15 appears to have run properly
[Thu Mar 29 07:51:50 2012] Warning, spatial fit 15 centroid is now closest to src. 71
[Thu Mar 29 07:51:50 2012] Source 4 is offset by 6.878509 and -1.830318 pixels which is larger than
2 X fitted extent = 1.997517 x 1.997517, not incorporating fit results
[Thu Mar 29 07:51:50 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 07:51:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 07:51:50 2012] Assessing source extent using major
[Thu Mar 29 07:51:50 2012] Source does appear to be extended
[Thu Mar 29 07:51:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 09:29:26 2012] XMMSAS src. selection expression = ellipse(24582.435120, 12915.340317, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Mar 29 09:29:26 2012] Writing source region out to fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src4_src.reg
[Thu Mar 29 09:29:26 2012] Extracting stamp from image fullrun_mos2_xmm0412593101_pi300-10000_cl_sm2.00.img.gz, (246, 112) - (321, 187)
[Thu Mar 29 09:29:26 2012] XMMSAS bgd. selection expression = annulus(24582.435120, 12915.340317, 1087.500000, 2175.000000, X, Y) && !ellipse(24816.626000, 14987.482000, 2129.560061, 349.260010, 4.933000, X, Y) && !ellipse(24519.723328, 15791.014496, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24227.700000, 9484.944000, 4391.008126, 2457.408071, 94.579000, X, Y) && !ellipse(24460.717400, 11539.567800, 595.984017, 595.984017, 0.000000, X, Y) && !ellipse(24514.974000, 10522.896000, 1075.328031, 1075.328031, 0.000000, X, Y) && !ellipse(24604.218000, 12248.934000, 1464.544042, 239.168007, 3.922000, X, Y) && !ellipse(23813.105400, 15609.818000, 858.528025, 858.528025, 0.000000, X, Y) && !ellipse(24335.751038, 10136.637764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24449.123444, 10999.839561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23971.303131, 14982.543472, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23822.590986, 13692.053467, 1848.128053, 932.417403, 76.339546, X, Y) && !ellipse(24698.581400, 10203.706000, 1340.120039, 1340.120039, 0.000000, X, Y) && !ellipse(24581.351868, 14221.781998, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23774.114600, 9462.052000, 2194.272063, 2194.272063, 0.000000, X, Y) && !ellipse(25361.449921, 14307.305801, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23916.172600, 14375.258040, 672.296819, 672.296819, 0.000000, X, Y) && !ellipse(23854.038000, 11498.222000, 1087.032031, 408.608012, 90.000000, X, Y) && !ellipse(23783.782000, 9110.834000, 2195.504063, 2195.504063, 0.000000, X, Y) && !ellipse(23883.594238, 10390.965012, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 29 09:29:26 2012] Writing fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src4.gif
[Thu Mar 29 09:45:35 2012] Mean detx,y = (413.53, 11418.33) 
[Thu Mar 29 09:45:37 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 09:45:59 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 09:45:59 2012] Setting source spectrum file to fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Mar 29 09:45:59 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Thu Mar 29 10:41:36 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Mar 29 10:41:36 2012] rmf not generated due to insufficient counts
[Thu Mar 29 11:48:02 2012] Updating aperture counts using extracted products
[Thu Mar 29 11:48:03 2012] Error reading totcts from fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Thu Mar 29 11:48:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 11:48:07 2012] Using photon index=1.80, rate=0.0658, arf fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src4.arf
[Thu Mar 29 11:48:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 11:48:07 2012] Updating source flux to 2.4e-12
[Thu Mar 29 11:53:22 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting