[Wed Mar 28 10:12:12 2012] Detection parameters:
  Position = (281.1, 123.0) = 5 34 33.01 21 49 28.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 285.0 +/- 23.8
  Background counts = 38.2
  Rate = 0.07 +/- 0.005

[Wed Mar 28 10:12:15 2012] Off-axis axis estimate = 12.78'
[Wed Mar 28 14:27:30 2012] Using EEF radius (= 12.82 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 14:27:30 2012] Initial guess for spatial extent in simple fitting = 12.82"
[Wed Mar 28 14:27:30 2012] source mask rpix=2.9, npix_max = 47, mask sum = 42, frac = 0.884
[Wed Mar 28 14:27:30 2012] Giving source the simple spatial ID 17 for pass 0, mean size = 12.82"
[Wed Mar 28 21:10:26 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src17.ximg exists
[Wed Mar 28 21:10:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src17.csv
[Wed Mar 28 21:10:26 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src17_1.ximg exists
[Wed Mar 28 21:10:26 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src17.csv
[Wed Mar 28 21:10:26 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 21:10:28 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Wed Mar 28 21:10:28 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Wed Mar 28 21:10:28 2012] Fit fullrun_mos2_xmm0412593101_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Wed Mar 28 21:11:09 2012] Warning, spatial fit 17 centroid is now closest to src. 73
[Wed Mar 28 21:11:09 2012] Spatial fit model total counts = 1681.370000, observed total counts = 1660.000000
[Wed Mar 28 21:11:09 2012] Offset between fit and detection position for source 2 = 1.924004 pixels
[Wed Mar 28 21:11:09 2012] Warning, changing simple spatial fit ID from 17 to 26
[Wed Mar 28 21:11:09 2012] 1532.037000 total counts/ 1343.370000 bgd. counts: snr = 5.147521
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.924004 pixels
  Position = (282.3, 121.5) = 5 34 32.62 21 49 23.6
  Extent = 13.4 (8.2-26.1)", rotation angle = 0
  Source counts = 188.7 +/- 39.1
  Background counts = 1343.4
  Rate = 0.04 +/- 0.009
[Wed Mar 28 21:11:09 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 21:11:09 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 21:11:09 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 21:11:09 2012] Source does appear to be extended
[Wed Mar 28 21:11:09 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 21:11:09 2012] Source is confused with source 7
[Wed Mar 28 21:11:09 2012] Source is confused with source 20
[Wed Mar 28 21:11:09 2012] Source is confused with source 21
[Wed Mar 28 21:11:09 2012] Source is confused with source 23
[Wed Mar 28 21:11:09 2012] Source is confused with source 74
[Thu Mar 29 01:29:37 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Mar 29 01:29:37 2012] Initial guess for spatial extent in simple fitting = 13.44"
[Thu Mar 29 01:29:37 2012] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.950
[Thu Mar 29 01:29:37 2012] Giving source the simple spatial ID 16 for pass 1, mean size = 13.44"
[Thu Mar 29 07:51:14 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src16.ximg exists
[Thu Mar 29 07:51:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src16.csv
[Thu Mar 29 07:51:14 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src16_1.ximg exists
[Thu Mar 29 07:51:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src16.csv
[Thu Mar 29 07:51:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 07:51:16 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_tfrozen_src16.ximg exists
[Thu Mar 29 07:51:16 2012] fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_tfrozen_src16_1.ximg exists
[Thu Mar 29 07:51:16 2012] Fit fullrun_mos2_xmm0412593101_pi300-10000_cl_pass1_tfrozen_src16 appears to have run properly
[Thu Mar 29 07:51:50 2012] Warning, spatial fit 16 centroid is now closest to src. 19
[Thu Mar 29 07:51:50 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 07:51:50 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 07:51:50 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 07:51:50 2012] Source does appear to be extended
[Thu Mar 29 07:51:50 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 09:29:26 2012] XMMSAS src. selection expression = ellipse(24514.974000, 10522.896000, 806.496023, 806.496023, 0.000000, X, Y)
[Thu Mar 29 09:29:26 2012] Writing source region out to fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src2_src.reg
[Thu Mar 29 09:29:26 2012] Extracting stamp from image fullrun_mos2_xmm0412593101_pi300-10000_cl_sm2.00.img.gz, (236, 75) - (329, 168)
[Thu Mar 29 09:29:26 2012] XMMSAS bgd. selection expression = annulus(24514.974000, 10522.896000, 1344.160039, 2688.320077, X, Y) && !ellipse(24816.626000, 14987.482000, 2129.560061, 349.260010, 4.933000, X, Y) && !ellipse(24227.700000, 9484.944000, 4391.008126, 2457.408071, 94.579000, X, Y) && !ellipse(24460.717400, 11539.567800, 595.984017, 595.984017, 0.000000, X, Y) && !ellipse(24582.435120, 12915.340317, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24604.218000, 12248.934000, 1464.544042, 239.168007, 3.922000, X, Y) && !ellipse(24335.751038, 10136.637764, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24485.805328, 8828.555275, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24478.849152, 7913.060020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24449.123444, 10999.839561, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24617.187000, 8574.238000, 1266.032036, 1266.032036, 0.000000, X, Y) && !ellipse(23822.590986, 13692.053467, 1848.128053, 932.417403, 76.339546, X, Y) && !ellipse(24698.581400, 10203.706000, 1340.120039, 1340.120039, 0.000000, X, Y) && !ellipse(23774.114600, 9462.052000, 2194.272063, 2194.272063, 0.000000, X, Y) && !ellipse(23854.038000, 11498.222000, 1087.032031, 408.608012, 90.000000, X, Y) && !ellipse(23783.782000, 9110.834000, 2195.504063, 2195.504063, 0.000000, X, Y) && !ellipse(23883.594238, 10390.965012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23831.608765, 8554.641876, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Mar 29 09:29:26 2012] Writing fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src2.gif
[Thu Mar 29 09:46:06 2012] Mean detx,y = (441.64, 13814.25) 
[Thu Mar 29 09:46:09 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 09:46:28 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 09:46:29 2012] Setting source spectrum file to fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar 29 09:46:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Thu Mar 29 11:48:03 2012] Updating aperture counts using extracted products
[Thu Mar 29 11:48:03 2012] Error reading totcts from fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Thu Mar 29 11:48:07 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 11:48:07 2012] Using photon index=1.80, rate=0.0433, arf fullrun_mos2_xmm0412593101_pi300-10000_pass1_cl_src2.arf
[Thu Mar 29 11:48:07 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 11:48:07 2012] Updating source flux to 1.5e-12
[Thu Mar 29 11:53:22 2012] Flag c found in src. 2 procflags, skipping spectral fitting