[Wed Mar 28 10:10:49 2012] Detection parameters:
  Position = (284.0, 134.0) = 5 34 32.11 21 50 18.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 99.8 +/- 16.8
  Background counts = 49.7
  Rate = 0.02 +/- 0.004

[Wed Mar 28 10:10:50 2012] Off-axis axis estimate = 11.96'
[Wed Mar 28 10:14:44 2012] Using EEF radius (= 12.41 ")to estimate initial spatial extent for simple fitting
[Wed Mar 28 10:14:44 2012] Initial guess for spatial extent in simple fitting = 12.41"
[Wed Mar 28 10:14:44 2012] source mask rpix=2.9, npix_max = 44, mask sum = 36, frac = 0.800
[Wed Mar 28 10:14:44 2012] Giving source the simple spatial ID 39 for pass 0, mean size = 12.41"
[Wed Mar 28 14:27:28 2012] fullrun_mos1_xmm0412593101_pi300-10000_cl_pass0_src39.ximg exists
[Wed Mar 28 14:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593101_pi300-10000_cl_pass0_src39.csv
[Wed Mar 28 14:27:28 2012] fullrun_mos1_xmm0412593101_pi300-10000_cl_pass0_src39_1.ximg exists
[Wed Mar 28 14:27:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593101_pi300-10000_cl_pass0_src39.csv
[Wed Mar 28 14:27:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593101_pi300-10000_cl_pass0_src39_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593101_pi300-10000_cl_pass0_src39.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Mar 28 14:27:30 2012] fullrun_mos1_xmm0412593101_pi300-10000_cl_pass0_tfrozen_src39.ximg exists
[Wed Mar 28 14:27:30 2012] fullrun_mos1_xmm0412593101_pi300-10000_cl_pass0_tfrozen_src39_1.ximg exists
[Wed Mar 28 14:27:30 2012] Fit fullrun_mos1_xmm0412593101_pi300-10000_cl_pass0_tfrozen_src39 appears to have run properly
[Wed Mar 28 21:10:48 2012] Spatial fit model total counts = 1141.760000, observed total counts = 1140.000000
[Wed Mar 28 21:10:48 2012] Offset between fit and detection position for source 43 = 4.053959 pixels
[Wed Mar 28 21:10:48 2012] 1079.308000 total counts/ 782.690000 bgd. counts: snr = 10.602362
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 4.053959 pixels
  Position = (282.1, 137.6) = 5 34 32.70 21 50 33.7
  Extent = 24.7 (24.6-24.8)", rotation angle = 0
  Source counts = 296.6 +/- 32.9
  Background counts = 782.7
  Rate = 0.07 +/- 0.008
[Wed Mar 28 21:10:48 2012] Source 43 is offset by -2.978460 and -0.204299 pixels which is larger than
2 X fitted extent = 1.459549 x 1.459549, not incorporating fit results
[Wed Mar 28 21:10:48 2012] Vigneting correction estimate = 1.000000
[Wed Mar 28 21:10:48 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Mar 28 21:10:48 2012] Assessing source extent using major axis lower bound
[Wed Mar 28 21:10:48 2012] Source does appear to be extended
[Wed Mar 28 21:10:48 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Mar 28 21:10:48 2012] Source is confused with source 11
[Wed Mar 28 21:11:29 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Mar 28 21:11:29 2012] Initial guess for spatial extent in simple fitting = 24.74"
[Wed Mar 28 21:11:29 2012] source mask rpix=5.7, npix_max = 153, mask sum = 156, frac = 1.019
[Wed Mar 28 21:11:29 2012] Giving source the simple spatial ID 35 for pass 1, mean size = 24.74"
[Thu Mar 29 01:29:34 2012] fullrun_mos1_xmm0412593101_pi300-10000_cl_pass1_src35.ximg exists
[Thu Mar 29 01:29:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593101_pi300-10000_cl_pass1_src35.csv
[Thu Mar 29 01:29:34 2012] fullrun_mos1_xmm0412593101_pi300-10000_cl_pass1_src35_1.ximg exists
[Thu Mar 29 01:29:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593101_pi300-10000_cl_pass1_src35.csv
[Thu Mar 29 01:29:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593101_pi300-10000_cl_pass1_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593101_pi300-10000_cl_pass1_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Mar 29 01:29:36 2012] fullrun_mos1_xmm0412593101_pi300-10000_cl_pass1_tfrozen_src35.ximg exists
[Thu Mar 29 01:29:36 2012] fullrun_mos1_xmm0412593101_pi300-10000_cl_pass1_tfrozen_src35_1.ximg exists
[Thu Mar 29 01:29:36 2012] Fit fullrun_mos1_xmm0412593101_pi300-10000_cl_pass1_tfrozen_src35 appears to have run properly
[Thu Mar 29 07:51:34 2012] Spatial fit model total counts = 919.588000, observed total counts = 922.000000
[Thu Mar 29 07:51:34 2012] Offset between fit and detection position for source 43 = 2.405206 pixels
[Thu Mar 29 07:51:34 2012] Warning, changing simple spatial fit ID from 35 to 34
[Thu Mar 29 07:51:34 2012] 826.288000 total counts/ 431.913000 bgd. counts: snr = 18.976287
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 2.405206 pixels
  Position = (282.2, 135.2) = 5 34 32.66 21 50 23.2
  Extent = 24.7 (24.7-49.4)", rotation angle = 0
  Source counts = 394.4 +/- 28.7
  Background counts = 431.9
  Rate = 0.09 +/- 0.007
[Thu Mar 29 07:51:34 2012] Vigneting correction estimate = 1.000000
[Thu Mar 29 07:51:34 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Mar 29 07:51:34 2012] Assessing source extent using major axis lower bound
[Thu Mar 29 07:51:34 2012] Source does appear to be extended
[Thu Mar 29 07:51:34 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Mar 29 07:52:10 2012] XMMSAS src. selection expression = ellipse(24504.844000, 11716.387400, 1483.224043, 1483.224043, 0.000000, X, Y)
[Thu Mar 29 07:52:10 2012] Writing source region out to fullrun_mos1_xmm0412593101_pi300-10000_pass1_cl_src43_src.reg
[Thu Mar 29 07:52:10 2012] Extracting stamp from image fullrun_mos1_xmm0412593101_pi300-10000_cl_sm2.00.img.gz, (197, 50) - (367, 220)
[Thu Mar 29 07:52:11 2012] XMMSAS bgd. selection expression = annulus(24504.844000, 11716.387400, 2472.040071, 4944.080142, X, Y) && !ellipse(24375.541962, 17522.694962, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24894.799316, 16659.575470, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24377.063293, 13619.292130, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24435.314000, 12362.538000, 2730.088079, 2730.088079, 0.000000, X, Y) && !ellipse(24179.740200, 9553.050400, 2072.720060, 2072.720060, 0.000000, X, Y) && !ellipse(24699.167000, 8346.954000, 2005.808058, 2005.808058, 0.000000, X, Y) && !ellipse(24503.110809, 16137.329880, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24258.787200, 15577.726000, 1743.792050, 1743.792050, 0.000000, X, Y) && !ellipse(24142.108000, 15597.376000, 1687.216049, 1687.216049, 0.000000, X, Y) && !ellipse(24172.209600, 14728.716000, 3487.584100, 3487.584100, 0.000000, X, Y) && !ellipse(25052.170868, 12987.064606, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24005.100000, 11094.030000, 2001.696058, 2001.696058, 0.000000, X, Y) && !ellipse(24386.280400, 11144.860000, 2638.784076, 2638.784076, 0.000000, X, Y) && !ellipse(24323.738000, 9551.390000, 2073.864060, 2073.864060, 0.000000, X, Y) && !ellipse(23759.280000, 9929.092000, 1389.576040, 1389.576040, 0.000000, X, Y) && !ellipse(23968.872120, 7962.279200, 1409.656041, 1409.656041, 0.000000, X, Y)
[Thu Mar 29 07:52:11 2012] Writing fullrun_mos1_xmm0412593101_pi300-10000_pass1_cl_src43.gif
[Thu Mar 29 08:26:00 2012] Mean detx,y = (12752.56, -447.23) 
[Thu Mar 29 08:26:02 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Mar 29 08:26:28 2012] Binned source spectrum to 10 counts/bin
[Thu Mar 29 08:26:28 2012] Setting source spectrum file to fullrun_mos1_xmm0412593101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Thu Mar 29 08:26:28 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412593101_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Thu Mar 29 11:47:58 2012] Updating aperture counts using extracted products
[Thu Mar 29 11:47:58 2012] Error reading totcts from fullrun_mos1_xmm0412593101_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Thu Mar 29 11:48:01 2012] Calculating source flux in energy range 0.30-8.00
[Thu Mar 29 11:48:01 2012] Using photon index=1.80, rate=0.0907, arf fullrun_mos1_xmm0412593101_pi300-10000_pass1_cl_src43.arf
[Thu Mar 29 11:48:01 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Mar 29 11:48:01 2012] Updating source flux to 1.9e-12
[Thu Mar 29 11:48:12 2012] Flag b found in src. 43 procflags, skipping spectral fitting
[Thu Mar 29 11:48:12 2012] Flag c found in src. 43 procflags, skipping spectral fitting