[Wed Aug 1 10:15:46 2012] Detection parameters: Position = (370.0, 269.9) = 5 34 5.20 22 0 13.9 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 278.2 +/- 32.1 Background counts = 295.9 Rate = 0.04 +/- 0.005 [Wed Aug 1 10:15:47 2012] Off-axis axis estimate = 5.59' [Wed Aug 1 15:33:35 2012] Using EEF radius (= 9.22 ")to estimate initial spatial extent for simple fitting [Wed Aug 1 15:33:35 2012] Initial guess for spatial extent in simple fitting = 9.22" [Wed Aug 1 15:33:35 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.311 [Wed Aug 1 15:33:35 2012] Giving source the simple spatial ID 47 for pass 0, mean size = 9.22" [Wed Aug 1 23:22:32 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src47.ximg exists [Wed Aug 1 23:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src47.csv [Wed Aug 1 23:22:32 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src47_1.ximg exists [Wed Aug 1 23:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src47.csv [Wed Aug 1 23:22:32 2012] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src47_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src47.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 23:22:35 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src47.ximg exists [Wed Aug 1 23:22:35 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src47_1.ximg exists [Wed Aug 1 23:22:35 2012] Fit fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src47 appears to have run properly [Wed Aug 1 23:23:13 2012] Warning, spatial fit 47 centroid is now closest to src. 89 [Wed Aug 1 23:23:13 2012] Spatial fit model total counts = 4310.390000, observed total counts = 4312.000000 [Wed Aug 1 23:23:13 2012] Offset between fit and detection position for source 94 = 0.680864 pixels [Wed Aug 1 23:23:13 2012] Warning, changing simple spatial fit ID from 47 to 98 [Wed Aug 1 23:23:13 2012] 4251.602900 total counts/ 4191.500000 bgd. counts: snr = 0.928348 Spatial fit parameters: Offset between fit and detection position for source 94 = 0.680864 pixels Position = (370.3, 269.3) = 5 34 5.10 22 0 11.2 Extent = 5.8 (2.3-16.0)", rotation angle = 0 Source counts = 60.1 +/- 65.2 Background counts = 4191.5 Rate = 0.006 +/- 0.006 Deleting source due to low Poisson probability