[Wed Aug  1 10:15:45 2012] Detection parameters:
  Position = (371.7, 306.9) = 5 34 4.64 22 2 56.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.9 +/- 26.3
  Background counts = 313.2
  Rate = 0.02 +/- 0.004

[Wed Aug  1 10:15:47 2012] Off-axis axis estimate = 5.35'
[Wed Aug  1 15:33:35 2012] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 15:33:35 2012] Initial guess for spatial extent in simple fitting = 9.10"
[Wed Aug  1 15:33:35 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.116
[Wed Aug  1 15:33:35 2012] Giving source the simple spatial ID 100 for pass 0, mean size = 9.10"
[Wed Aug  1 23:22:34 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src100.ximg exists
[Wed Aug  1 23:22:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src100.csv
[Wed Aug  1 23:22:34 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src100_1.ximg exists
[Wed Aug  1 23:22:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src100.csv
[Wed Aug  1 23:22:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src100_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src100.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 23:22:36 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src100.ximg exists
[Wed Aug  1 23:22:36 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src100_1.ximg exists
[Wed Aug  1 23:22:36 2012] Fit fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src100 appears to have run properly
[Wed Aug  1 23:23:13 2012] Warning, spatial fit 100 centroid is now closest to src. 78
[Wed Aug  1 23:23:13 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 23:23:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 23:23:13 2012] Assessing source extent using major
[Wed Aug  1 23:23:13 2012] Source does appear to be extended
[Wed Aug  1 23:23:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 23:23:13 2012] Source is confused with source 80
[Thu Aug  2 03:24:45 2012] Using EEF radius (= 9.10 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 03:24:45 2012] Initial guess for spatial extent in simple fitting = 9.10"
[Thu Aug  2 03:24:45 2012] source mask rpix=2.1, npix_max = 26, mask sum = 30, frac = 1.116
[Thu Aug  2 03:24:45 2012] Giving source the simple spatial ID 92 for pass 1, mean size = 9.10"
[Thu Aug  2 11:32:31 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src92.ximg exists
[Thu Aug  2 11:32:31 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src92_1.ximg exists
[Thu Aug  2 11:32:31 2012] Fit fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src92 appears to have run properly
[Thu Aug  2 11:32:35 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src92.ximg exists
[Thu Aug  2 11:32:35 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src92_1.ximg exists
[Thu Aug  2 11:32:35 2012] Fit fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src92 appears to have run properly
[Thu Aug  2 11:33:25 2012] Source 76 is offset by -4.489212 and 3.582006 pixels which is larger than
2 X fitted extent = 1.046405 x 1.046405, not incorporating fit results
[Thu Aug  2 11:33:25 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 11:33:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 11:33:25 2012] Assessing source extent using major
[Thu Aug  2 11:33:25 2012] Source does appear to be extended
[Thu Aug  2 11:33:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 13:10:15 2012] XMMSAS src. selection expression = ellipse(32293.176514, 26654.908508, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug  2 13:10:15 2012] Writing source region out to fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src76_src.reg
[Thu Aug  2 13:10:15 2012] Extracting stamp from image fullrun_mos2_xmm0412593001_pi300-10000_cl_sm2.00.img.gz, (334, 269) - (409, 344)
[Thu Aug  2 13:10:15 2012] XMMSAS bgd. selection expression = annulus(32293.176514, 26654.908508, 1087.500000, 2175.000000, X, Y) && !ellipse(32087.648000, 23431.005600, 1504.912043, 1504.912043, 0.000000, X, Y) && !ellipse(31696.479919, 24387.120544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31914.314453, 25836.378906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31518.683228, 23617.653229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31674.007751, 27430.960297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31825.007233, 25006.507019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32435.544495, 27538.321716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31695.611725, 26390.138367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32515.099792, 25339.896393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32670.912000, 26172.282000, 1014.856029, 1014.856029, 0.000000, X, Y) && !ellipse(32226.861847, 28143.243591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32934.254578, 24753.684509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31663.002655, 28687.484772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32706.702637, 23962.435333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31695.603760, 28064.548523, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  2 13:10:15 2012] Writing fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src76.gif
[Thu Aug  2 14:07:34 2012] Mean detx,y = (7492.85, -2624.76) 
[Thu Aug  2 14:07:35 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 14:07:43 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 14:07:43 2012] Setting source spectrum file to fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Thu Aug  2 14:07:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src76_bgd.pi.gz
[Thu Aug  2 15:59:11 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug  2 15:59:11 2012] rmf not generated due to insufficient counts
[Thu Aug  2 16:01:32 2012] Updating aperture counts using extracted products
[Thu Aug  2 16:01:32 2012] Error reading totcts from fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src76_src_b10.pi.gz
[Thu Aug  2 16:01:34 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 16:01:34 2012] Using photon index=1.80, rate=0.0184, arf fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src76.arf
[Thu Aug  2 16:01:34 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 16:01:34 2012] Updating source flux to 3.4e-13
[Thu Aug  2 16:05:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting