[Wed Aug  1 10:15:45 2012] Detection parameters:
  Position = (198.4, 307.8) = 5 34 58.88 22 2 57.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 176.5 +/- 29.2
  Background counts = 330.8
  Rate = 0.02 +/- 0.004

[Wed Aug  1 10:15:47 2012] Off-axis axis estimate = 7.29'
[Wed Aug  1 15:33:35 2012] Using EEF radius (= 10.07 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 15:33:35 2012] Initial guess for spatial extent in simple fitting = 10.07"
[Wed Aug  1 15:33:35 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.946
[Wed Aug  1 15:33:35 2012] Giving source the simple spatial ID 89 for pass 0, mean size = 10.07"
[Wed Aug  1 23:22:33 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src89.ximg exists
[Wed Aug  1 23:22:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src89.csv
[Wed Aug  1 23:22:33 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src89_1.ximg exists
[Wed Aug  1 23:22:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src89.csv
[Wed Aug  1 23:22:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src89_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src89.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 23:22:36 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src89.ximg exists
[Wed Aug  1 23:22:36 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src89_1.ximg exists
[Wed Aug  1 23:22:36 2012] Fit fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src89 appears to have run properly
[Wed Aug  1 23:23:13 2012] Spatial fit model total counts = 4351.000000, observed total counts = 4349.000000
[Wed Aug  1 23:23:13 2012] Offset between fit and detection position for source 75 = 0.704842 pixels
[Wed Aug  1 23:23:13 2012] 4355.091900 total counts/ 4317.990000 bgd. counts: snr = 0.564619
Spatial fit parameters:
  Offset between fit and detection position for source 75 = 0.704842 pixels
  Position = (197.9, 307.3) = 5 34 59.03 22 2 56.5
  Extent = 3.8 (2.5-20.1)", rotation angle = 0
  Source counts = 37.1 +/- 66.0
  Background counts = 4318.0
  Rate = 0.004 +/- 0.006
  Deleting source due to low Poisson probability