[Wed Aug  1 10:15:45 2012] Detection parameters:
  Position = (302.3, 361.9) = 5 34 26.38 22 6 45.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 338.2 +/- 29.7
  Background counts = 335.4
  Rate = 0.05 +/- 0.005

[Wed Aug  1 10:15:47 2012] Off-axis axis estimate = 4.61'
[Wed Aug  1 15:33:35 2012] Using EEF radius (= 8.73 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 15:33:35 2012] Initial guess for spatial extent in simple fitting = 8.73"
[Wed Aug  1 15:33:35 2012] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.795
[Wed Aug  1 15:33:35 2012] Giving source the simple spatial ID 33 for pass 0, mean size = 8.73"
[Wed Aug  1 23:22:32 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src33.ximg exists
[Wed Aug  1 23:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src33.csv
[Wed Aug  1 23:22:32 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src33_1.ximg exists
[Wed Aug  1 23:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src33.csv
[Wed Aug  1 23:22:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 23:22:35 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Wed Aug  1 23:22:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src33.csv
[Wed Aug  1 23:22:35 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Wed Aug  1 23:22:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src33.csv
[Wed Aug  1 23:22:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 23:23:13 2012] Source 64 is offset by 0.135582 and 2.311407 pixels which is larger than
2 X fitted extent = 1.958386 x 1.958386, not incorporating fit results
[Wed Aug  1 23:23:13 2012] Warning, spatial fit 33 centroid is now closest to src. 63
[Wed Aug  1 23:23:13 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 23:23:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 23:23:13 2012] Assessing source extent using major
[Wed Aug  1 23:23:13 2012] Source does appear to be extended
[Wed Aug  1 23:23:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 23:23:13 2012] Source is confused with source 7
[Thu Aug  2 03:24:45 2012] Using EEF radius (= 8.73 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 03:24:45 2012] Initial guess for spatial extent in simple fitting = 8.73"
[Thu Aug  2 03:24:45 2012] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.795
[Thu Aug  2 03:24:45 2012] Giving source the simple spatial ID 32 for pass 1, mean size = 8.73"
[Thu Aug  2 11:32:29 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src32.ximg exists
[Thu Aug  2 11:32:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src32.csv
[Thu Aug  2 11:32:29 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src32_1.ximg exists
[Thu Aug  2 11:32:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src32.csv
[Thu Aug  2 11:32:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 11:32:33 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src32.ximg exists
[Thu Aug  2 11:32:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src32.csv
[Thu Aug  2 11:32:33 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src32_1.ximg exists
[Thu Aug  2 11:32:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src32.csv
[Thu Aug  2 11:32:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src32_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src32.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 11:33:25 2012] Source 64 is offset by -0.046694 and 2.559522 pixels which is larger than
2 X fitted extent = 2.020635 x 2.020635, not incorporating fit results
[Thu Aug  2 11:33:25 2012] Warning, spatial fit 32 centroid is now closest to src. 53
[Thu Aug  2 11:33:25 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 11:33:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 11:33:25 2012] Assessing source extent using major
[Thu Aug  2 11:33:25 2012] Source does appear to be extended
[Thu Aug  2 11:33:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 13:10:12 2012] XMMSAS src. selection expression = ellipse(26247.937653, 31440.540405, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug  2 13:10:12 2012] Writing source region out to fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src64_src.reg
[Thu Aug  2 13:10:12 2012] Extracting stamp from image fullrun_mos2_xmm0412593001_pi300-10000_cl_sm2.00.img.gz, (265, 324) - (340, 399)
[Thu Aug  2 13:10:12 2012] XMMSAS bgd. selection expression = annulus(26247.937653, 31440.540405, 1087.500000, 2175.000000, X, Y) && !ellipse(25734.245239, 31443.468903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25366.189148, 32368.712097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24423.810394, 31571.890015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23384.764000, 31738.374000, 692.646420, 692.646420, 0.000000, X, Y) && !ellipse(23549.957947, 32395.469482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23897.668549, 31576.724823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26604.794830, 31480.079102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25328.885986, 32756.964996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23308.404000, 31262.844000, 2975.312086, 2975.312086, 0.000000, X, Y) && !ellipse(25225.000000, 33343.309631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28310.215729, 31353.415619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26064.546000, 31990.760000, 1433.592041, 1433.592041, 0.000000, X, Y) && !ellipse(27594.998627, 31529.090942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24568.182922, 33342.234344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25769.504028, 33438.163208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28005.776000, 31975.635340, 1454.816042, 1454.816042, 0.000000, X, Y) && !ellipse(27540.668762, 32288.793060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28959.402252, 31384.614868, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  2 13:10:12 2012] Writing fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src64.gif
[Thu Aug  2 13:30:24 2012] Mean detx,y = (1261.62, -7262.49) 
[Thu Aug  2 13:30:24 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 13:30:36 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 13:30:37 2012] Setting source spectrum file to fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Thu Aug  2 13:30:37 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src64_bgd.pi.gz
[Thu Aug  2 15:10:09 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug  2 15:10:09 2012] rmf not generated due to insufficient counts
[Thu Aug  2 16:01:31 2012] Updating aperture counts using extracted products
[Thu Aug  2 16:01:31 2012] Error reading totcts from fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src64_src_b10.pi.gz
[Thu Aug  2 16:01:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 16:01:33 2012] Using photon index=1.80, rate=0.0522, arf fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src64.arf
[Thu Aug  2 16:01:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 16:01:33 2012] Updating source flux to 9e-13
[Thu Aug  2 16:05:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting