[Wed Aug  1 10:15:44 2012] Detection parameters:
  Position = (261.7, 364.0) = 5 34 39.08 22 6 56.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 369.8 +/- 31.5
  Background counts = 319.2
  Rate = 0.05 +/- 0.004

[Wed Aug  1 10:15:47 2012] Off-axis axis estimate = 5.45'
[Wed Aug  1 15:33:35 2012] Using EEF radius (= 9.15 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 15:33:35 2012] Initial guess for spatial extent in simple fitting = 9.15"
[Wed Aug  1 15:33:35 2012] source mask rpix=2.1, npix_max = 27, mask sum = 26, frac = 0.959
[Wed Aug  1 15:33:35 2012] Giving source the simple spatial ID 38 for pass 0, mean size = 9.15"
[Wed Aug  1 23:22:32 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src38.ximg exists
[Wed Aug  1 23:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src38.csv
[Wed Aug  1 23:22:32 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src38_1.ximg exists
[Wed Aug  1 23:22:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src38.csv
[Wed Aug  1 23:22:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 23:22:35 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src38.ximg exists
[Wed Aug  1 23:22:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src38.csv
[Wed Aug  1 23:22:35 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src38_1.ximg exists
[Wed Aug  1 23:22:35 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src38.csv
[Wed Aug  1 23:22:35 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src38_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src38.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 23:23:13 2012] Spatial fit model total counts = 5489.080000, observed total counts = 4076.000000
[Wed Aug  1 23:23:13 2012] Poor agreement between spatial fit and data for source 55
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug  1 23:23:13 2012] Spatial fit model total counts = 4116.590000, observed total counts = 4140.000000
[Wed Aug  1 23:23:13 2012] Offset between fit and detection position for source 55 = 3.575649 pixels
[Wed Aug  1 23:23:13 2012] Warning, changing simple spatial fit ID from 38 to 62
[Wed Aug  1 23:23:13 2012] 3904.868000 total counts/ 3671.050000 bgd. counts: snr = 3.859071
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 3.575649 pixels
  Position = (264.8, 365.8) = 5 34 38.12 22 7 11.3
  Extent = 18.8 (13.6-37.7)" x 6.7 (4.6-11.3)", rotation angle = 357 (337-11) degrees
  Source counts = 233.8 +/- 62.5
  Background counts = 3671.1
  Rate = 0.02 +/- 0.006
[Wed Aug  1 23:23:13 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 23:23:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 23:23:13 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 23:23:13 2012] Source does appear to be extended
[Wed Aug  1 23:23:13 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.20
[Wed Aug  1 23:23:13 2012] Source is confused with source 60
[Thu Aug  2 03:24:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  2 03:24:45 2012] Initial guess for spatial extent in simple fitting = 12.76"
[Thu Aug  2 03:24:45 2012] source mask rpix=2.9, npix_max = 47, mask sum = 49, frac = 1.039
[Thu Aug  2 03:24:45 2012] Giving source the simple spatial ID 37 for pass 1, mean size = 12.76"
[Thu Aug  2 11:32:29 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src37.ximg exists
[Thu Aug  2 11:32:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src37.csv
[Thu Aug  2 11:32:29 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src37_1.ximg exists
[Thu Aug  2 11:32:29 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src37.csv
[Thu Aug  2 11:32:29 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 11:32:33 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Thu Aug  2 11:32:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src37.csv
[Thu Aug  2 11:32:33 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Thu Aug  2 11:32:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src37.csv
[Thu Aug  2 11:32:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 11:33:25 2012] Warning, spatial fit 37 centroid is now closest to src. 60
[Thu Aug  2 11:33:25 2012] Spatial fit model total counts = 10121.100000, observed total counts = 10200.000000
[Thu Aug  2 11:33:25 2012] Offset between fit and detection position for source 55 = 7.008302 pixels
[Thu Aug  2 11:33:25 2012] Warning, changing simple spatial fit ID from 37 to 74
[Thu Aug  2 11:33:25 2012] 9836.810000 total counts/ 8297.090000 bgd. counts: snr = 16.903586
Spatial fit parameters:
  Offset between fit and detection position for source 55 = 7.008302 pixels
  Position = (268.5, 359.9) = 5 34 36.96 22 6 45.5
  Extent = 37.2 (37.2-74.4)", rotation angle = 0
  Source counts = 1539.7 +/- 99.2
  Background counts = 8297.1
  Rate = 0.1 +/- 0.01
[Thu Aug  2 11:33:25 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 11:33:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 11:33:25 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 11:33:25 2012] Source does appear to be extended
[Thu Aug  2 11:33:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 13:10:12 2012] Counts = 1539.720000, rescaling region sizes by 2.000000
[Thu Aug  2 13:10:12 2012] XMMSAS src. selection expression = ellipse(23308.404000, 31262.844000, 4462.968128, 4462.968128, 0.000000, X, Y)
[Thu Aug  2 13:10:12 2012] Writing source region out to fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src55_src.reg
[Thu Aug  2 13:10:12 2012] Extracting stamp from image fullrun_mos2_xmm0412593001_pi300-10000_cl_sm2.00.img.gz, (12, 103) - (525, 595)
[Thu Aug  2 13:10:12 2012] XMMSAS bgd. selection expression = annulus(23308.404000, 31262.844000, 14876.560428, 29753.120856, X, Y) && !ellipse(24671.535248, 17452.749542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25189.457123, 17439.697418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23955.429600, 17548.482000, 669.316019, 669.316019, 0.000000, X, Y) && !ellipse(24683.199400, 14395.873060, 649.870419, 649.870419, 0.000000, X, Y) && !ellipse(25734.245239, 31443.468903, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24824.690000, 15193.455800, 1765.528051, 905.112026, 90.000000, X, Y) && !ellipse(24548.432159, 15967.828827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.490204, 15976.850738, 1647.488047, 1235.040658, 359.461606, X, Y) && !ellipse(25366.189148, 32368.712097, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24788.922000, 16761.395940, 1647.488047, 470.433614, 356.962000, X, Y) && !ellipse(32087.648000, 23431.005600, 1504.912043, 1504.912043, 0.000000, X, Y) && !ellipse(24539.269600, 10416.024200, 1482.240043, 892.264026, 90.000000, X, Y) && !ellipse(20654.009964, 17526.900528, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24423.810394, 31571.890015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23933.240600, 15796.898000, 749.403222, 749.403222, 0.000000, X, Y) && !ellipse(24590.376800, 12893.835000, 742.738421, 742.738421, 0.000000, X, Y) && !ellipse(17777.906998, 22311.883270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24475.376373, 11607.272430, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24020.562000, 16738.366940, 640.266418, 640.266418, 0.000000, X, Y) && !ellipse(31696.479919, 24387.120544, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31406.139191, 20319.909042, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24449.826000, 8896.808000, 860.616025, 860.616025, 0.000000, X, Y) && !ellipse(23384.764000, 31738.374000, 692.646420, 692.646420, 0.000000, X, Y) && !ellipse(22964.570000, 17663.598000, 1620.448047, 1620.448047, 0.000000, X, Y) && !ellipse(23549.957947, 32395.469482, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23897.668549, 31576.724823, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24564.364990, 13854.635254, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24716.377000, 13413.308000, 969.184028, 969.184028, 0.000000, X, Y) && !ellipse(24412.428284, 9690.754135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26604.794830, 31480.079102, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26247.937653, 31440.540405, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31700.802307, 22225.817841, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25328.885986, 32756.964996, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31914.314453, 25836.378906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24108.488000, 15766.348000, 1059.624030, 1059.624030, 0.000000, X, Y) && !ellipse(31518.683228, 23617.653229, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31674.007751, 27430.960297, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31825.007233, 25006.507019, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31473.104000, 21992.990000, 1656.480048, 1656.480048, 0.000000, X, Y) && !ellipse(25225.000000, 33343.309631, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32435.544495, 27538.321716, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17809.767349, 23580.551849, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24096.920532, 7905.058426, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31695.611725, 26390.138367, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18029.952911, 26732.950439, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17832.185089, 26047.318329, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18090.996017, 28311.078613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24070.059601, 11265.337845, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24064.778748, 10641.938957, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28310.215729, 31353.415619, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26064.546000, 31990.760000, 1433.592041, 1433.592041, 0.000000, X, Y) && !ellipse(27594.998627, 31529.090942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32622.408000, 21452.548000, 1590.096046, 1590.096046, 0.000000, X, Y) && !ellipse(22701.997345, 32346.393921, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24240.618683, 8299.906418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31592.461182, 19792.884399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23960.205109, 12912.827332, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24493.345612, 12235.425812, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23957.754517, 13949.618927, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23789.393799, 9767.720116, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17665.554123, 25291.805847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25627.122772, 16228.199585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24568.182922, 33342.234344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21613.500381, 31652.292267, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32515.099792, 25339.896393, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17620.041611, 24580.242065, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21595.160680, 17635.864000, 1656.736048, 1656.736048, 0.000000, X, Y) && !ellipse(25769.504028, 33438.163208, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32292.353455, 21966.690964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22406.834000, 32840.202000, 1504.960043, 1504.960043, 0.000000, X, Y) && !ellipse(32446.002655, 20596.020142, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32273.977997, 20045.829041, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28005.776000, 31975.635340, 1454.816042, 1454.816042, 0.000000, X, Y) && !ellipse(23576.842000, 15760.473600, 1498.808043, 1498.808043, 0.000000, X, Y) && !ellipse(17202.320541, 25702.719421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27540.668762, 32288.793060, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27018.153687, 17405.555069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32670.912000, 26172.282000, 1014.856029, 1014.856029, 0.000000, X, Y) && !ellipse(32226.861847, 28143.243591, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20945.598557, 31654.275574, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32826.465698, 19963.324005, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32601.146637, 22718.238159, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25530.973541, 34563.736328, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32934.254578, 24753.684509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23667.602295, 8564.645363, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17909.285812, 29623.403839, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31663.002655, 28687.484772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32706.702637, 23962.435333, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32293.176514, 26654.908508, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32858.602173, 22208.643784, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16695.871048, 25497.947632, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32653.193176, 23537.083710, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18166.438675, 28995.077881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28959.402252, 31384.614868, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17092.979797, 23518.381683, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31695.603760, 28064.548523, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33350.358734, 22618.164795, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29675.795532, 31263.441986, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25051.002655, 8221.252502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25711.414642, 38297.673950, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  2 13:10:12 2012] Writing fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src55.gif
[Thu Aug  2 13:32:17 2012] Mean detx,y = (-1268.37, -8380.93) 
[Thu Aug  2 13:32:19 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 13:39:41 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 13:39:41 2012] Setting source spectrum file to fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Thu Aug  2 13:39:41 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src55_bgd.pi.gz
[Thu Aug  2 16:01:32 2012] Updating aperture counts using extracted products
[Thu Aug  2 16:01:32 2012] Error reading totcts from fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src55_src_b10.pi.gz
[Thu Aug  2 16:01:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 16:01:33 2012] Using photon index=1.80, rate=0.149, arf fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src55.arf
[Thu Aug  2 16:01:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 16:01:33 2012] Updating source flux to 2.9e-12
[Thu Aug  2 16:05:01 2012] Flag p found in src. 55 procflags, skipping spectral fitting
[Thu Aug  2 16:05:01 2012] Flag c found in src. 55 procflags, skipping spectral fitting