[Wed Aug  1 10:15:42 2012] Detection parameters:
  Position = (277.2, 167.9) = 5 34 34.20 21 52 54.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 341.7 +/- 30.8
  Background counts = 189.7
  Rate = 0.03 +/- 0.003

[Wed Aug  1 10:15:47 2012] Off-axis axis estimate = 9.58'
[Wed Aug  1 15:33:35 2012] Using EEF radius (= 11.22 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 15:33:35 2012] Initial guess for spatial extent in simple fitting = 11.22"
[Wed Aug  1 15:33:35 2012] source mask rpix=2.6, npix_max = 37, mask sum = 35, frac = 0.923
[Wed Aug  1 15:33:35 2012] Giving source the simple spatial ID 63 for pass 0, mean size = 11.22"
[Wed Aug  1 23:22:33 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src63.ximg exists
[Wed Aug  1 23:22:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src63.csv
[Wed Aug  1 23:22:33 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src63_1.ximg exists
[Wed Aug  1 23:22:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src63.csv
[Wed Aug  1 23:22:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 23:22:35 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Wed Aug  1 23:22:36 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Wed Aug  1 23:22:36 2012] Fit fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Wed Aug  1 23:23:13 2012] Spatial fit model total counts = 3559.250000, observed total counts = 3661.000000
[Wed Aug  1 23:23:13 2012] Offset between fit and detection position for source 21 = 2.987133 pixels
[Wed Aug  1 23:23:13 2012] 2927.216000 total counts/ 2377.410000 bgd. counts: snr = 11.276061
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 2.987133 pixels
  Position = (275.4, 170.3) = 5 34 34.77 21 53 0.8
  Extent = 12.2 (10.2-16.4)", rotation angle = 0
  Source counts = 549.8 +/- 54.1
  Background counts = 2377.4
  Rate = 0.05 +/- 0.005
[Wed Aug  1 23:23:13 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 23:23:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 23:23:13 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 23:23:13 2012] Source does appear to be extended
[Wed Aug  1 23:23:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 03:24:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  2 03:24:45 2012] Initial guess for spatial extent in simple fitting = 12.21"
[Thu Aug  2 03:24:45 2012] source mask rpix=2.8, npix_max = 43, mask sum = 49, frac = 1.120
[Thu Aug  2 03:24:45 2012] Giving source the simple spatial ID 58 for pass 1, mean size = 12.21"
[Thu Aug  2 11:32:30 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src58.ximg exists
[Thu Aug  2 11:32:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src58.csv
[Thu Aug  2 11:32:30 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src58_1.ximg exists
[Thu Aug  2 11:32:30 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src58.csv
[Thu Aug  2 11:32:30 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 11:32:34 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src58.ximg exists
[Thu Aug  2 11:32:34 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src58_1.ximg exists
[Thu Aug  2 11:32:34 2012] Fit fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src58 appears to have run properly
[Thu Aug  2 11:33:25 2012] Spatial fit model total counts = 4248.510000, observed total counts = 4235.000000
[Thu Aug  2 11:33:25 2012] Offset between fit and detection position for source 21 = 0.422283 pixels
[Thu Aug  2 11:33:25 2012] Warning, changing simple spatial fit ID from 58 to 28
[Thu Aug  2 11:33:25 2012] 4074.103000 total counts/ 4056.570000 bgd. counts: snr = 0.275281
Spatial fit parameters:
  Offset between fit and detection position for source 21 = 0.422283 pixels
  Position = (275.8, 170.4) = 5 34 34.65 21 53 1.3
  Extent = 2.9" x 2.9", rotation angle = 0
  Source counts = 17.5 +/- 63.8
  Background counts = 4056.6
  Rate = 0.002 +/- 0.006
  Deleting source due to low Poisson probability