[Wed Aug  1 10:15:42 2012] Detection parameters:
  Position = (277.3, 201.2) = 5 34 34.17 21 55 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 526.4 +/- 40.2
  Background counts = 295.6
  Rate = 0.09 +/- 0.007

[Wed Aug  1 10:15:47 2012] Off-axis axis estimate = 7.21'
[Wed Aug  1 15:33:35 2012] Using EEF radius (= 10.03 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 15:33:35 2012] Initial guess for spatial extent in simple fitting = 10.03"
[Wed Aug  1 15:33:35 2012] source mask rpix=2.3, npix_max = 31, mask sum = 28, frac = 0.888
[Wed Aug  1 15:33:35 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 10.03"
[Wed Aug  1 23:22:31 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src4.ximg exists
[Wed Aug  1 23:22:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src4.csv
[Wed Aug  1 23:22:31 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Aug  1 23:22:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src4.csv
[Wed Aug  1 23:22:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 23:22:34 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Aug  1 23:22:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Aug  1 23:22:34 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Aug  1 23:22:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Aug  1 23:22:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 23:23:13 2012] Spatial fit model total counts = 11604.700000, observed total counts = 3429.000000
[Wed Aug  1 23:23:13 2012] Poor agreement between spatial fit and data for source 13
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug  1 23:23:13 2012] Spatial fit model total counts = 4929.530000, observed total counts = 4901.000000
[Wed Aug  1 23:23:13 2012] Offset between fit and detection position for source 13 = 1.783507 pixels
[Wed Aug  1 23:23:13 2012] Warning, changing simple spatial fit ID from 4 to 20
[Wed Aug  1 23:23:13 2012] 4949.791000 total counts/ 4810.740000 bgd. counts: snr = 2.004787
Spatial fit parameters:
  Offset between fit and detection position for source 13 = 1.783507 pixels
  Position = (275.9, 202.3) = 5 34 34.62 21 55 19.7
  Extent = 8.4 (6.2-11.6)", rotation angle = 0
  Source counts = 139.1 +/- 70.4
  Background counts = 4810.7
  Rate = 0.01 +/- 0.007
[Wed Aug  1 23:23:13 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 23:23:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 23:23:13 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 23:23:13 2012] Source does appear to be extended
[Wed Aug  1 23:23:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 23:23:13 2012] Source is confused with source 111
[Thu Aug  2 03:24:45 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Thu Aug  2 03:24:45 2012] Initial guess for spatial extent in simple fitting = 8.37"
[Thu Aug  2 03:24:45 2012] source mask rpix=1.9, npix_max = 23, mask sum = 21, frac = 0.894
[Thu Aug  2 03:24:45 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 8.37"
[Thu Aug  2 11:32:28 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src3.ximg exists
[Thu Aug  2 11:32:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src3.csv
[Thu Aug  2 11:32:28 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src3_1.ximg exists
[Thu Aug  2 11:32:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src3.csv
[Thu Aug  2 11:32:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 11:32:32 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Thu Aug  2 11:32:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Aug  2 11:32:32 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Thu Aug  2 11:32:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src3.csv
[Thu Aug  2 11:32:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 11:33:25 2012] Warning, spatial fit 3 centroid is now closest to src. 111
[Thu Aug  2 11:33:25 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 11:33:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 11:33:25 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 11:33:25 2012] Source does appear to be extended
[Thu Aug  2 11:33:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 13:10:10 2012] XMMSAS src. selection expression = ellipse(23955.429600, 17548.482000, 501.987014, 501.987014, 0.000000, X, Y)
[Thu Aug  2 13:10:10 2012] Writing source region out to fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src13_src.reg
[Thu Aug  2 13:10:10 2012] Extracting stamp from image fullrun_mos2_xmm0412593001_pi300-10000_cl_sm2.00.img.gz, (247, 173) - (305, 231)
[Thu Aug  2 13:10:10 2012] XMMSAS bgd. selection expression = annulus(23955.429600, 17548.482000, 836.645024, 1673.290048, X, Y) && !ellipse(24671.535248, 17452.749542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25189.457123, 17439.697418, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24824.690000, 15193.455800, 1765.528051, 905.112026, 90.000000, X, Y) && !ellipse(24548.432159, 15967.828827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.490204, 15976.850738, 1647.488047, 1235.040658, 359.461606, X, Y) && !ellipse(24788.922000, 16761.395940, 1647.488047, 470.433614, 356.962000, X, Y) && !ellipse(23933.240600, 15796.898000, 749.403222, 749.403222, 0.000000, X, Y) && !ellipse(24020.562000, 16738.366940, 640.266418, 640.266418, 0.000000, X, Y) && !ellipse(22964.570000, 17663.598000, 1620.448047, 1620.448047, 0.000000, X, Y) && !ellipse(24108.488000, 15766.348000, 1059.624030, 1059.624030, 0.000000, X, Y) && !ellipse(25627.122772, 16228.199585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21595.160680, 17635.864000, 1656.736048, 1656.736048, 0.000000, X, Y) && !ellipse(23576.842000, 15760.473600, 1498.808043, 1498.808043, 0.000000, X, Y)
[Thu Aug  2 13:10:10 2012] Writing fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src13.gif
[Thu Aug  2 13:11:52 2012] Mean detx,y = (-402.75, 6939.85) 
[Thu Aug  2 13:11:53 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 13:12:03 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 13:12:03 2012] Setting source spectrum file to fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Aug  2 13:12:03 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Thu Aug  2 16:01:31 2012] Updating aperture counts using extracted products
[Thu Aug  2 16:01:31 2012] Error reading totcts from fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Thu Aug  2 16:01:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 16:01:33 2012] Using photon index=1.80, rate=0.0134, arf fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src13.arf
[Thu Aug  2 16:01:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 16:01:33 2012] Updating source flux to 3e-13
[Thu Aug  2 16:05:01 2012] Flag p found in src. 13 procflags, skipping spectral fitting
[Thu Aug  2 16:05:01 2012] Flag c found in src. 13 procflags, skipping spectral fitting
[Thu Aug  2 16:09:47 2012] Reading fit data from xmm0412593001/analysis//spectral/fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src13_pl.csv
[Thu Aug  2 16:09:47 2012] Spectral fit parameter nH value = 1.61615e+21
[Thu Aug  2 16:09:47 2012] Spectral fit parameter PhoIndex value = 2.03128
[Thu Aug  2 16:09:47 2012] Failed to get F(0.3-8.0) from xmm0412593001/analysis//spectral/fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src13_pl.csv, possibly due to different flux energy range selected
[Thu Aug  2 16:09:47 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 16:09:47 2012] Using Nh = 1.6e+21, photon index=2.03, rate=0.0134, arf fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src13.arf
[Thu Aug  2 16:09:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 16:09:47 2012] Updating source flux to 3e-13