[Wed Aug  1 10:15:42 2012] Detection parameters:
  Position = (290.1, 201.0) = 5 34 30.19 21 55 16.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 778.7 +/- 41.7
  Background counts = 323.7
  Rate = 0.1 +/- 0.006

[Wed Aug  1 10:15:47 2012] Off-axis axis estimate = 7.09'
[Wed Aug  1 15:33:35 2012] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 15:33:35 2012] Initial guess for spatial extent in simple fitting = 9.97"
[Wed Aug  1 15:33:35 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.962
[Wed Aug  1 15:33:35 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 9.97"
[Wed Aug  1 23:22:31 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src2.ximg exists
[Wed Aug  1 23:22:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src2.csv
[Wed Aug  1 23:22:31 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src2_1.ximg exists
[Wed Aug  1 23:22:31 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src2.csv
[Wed Aug  1 23:22:31 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 23:22:34 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Wed Aug  1 23:22:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Aug  1 23:22:34 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Wed Aug  1 23:22:34 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src2.csv
[Wed Aug  1 23:22:34 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 23:23:13 2012] Warning, spatial fit 2 centroid is now closest to src. 114
[Wed Aug  1 23:23:13 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 23:23:13 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 23:23:13 2012] Assessing source extent using major
[Wed Aug  1 23:23:13 2012] Source does appear to be extended
[Wed Aug  1 23:23:13 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 23:23:13 2012] Source is confused with source 10
[Thu Aug  2 03:24:45 2012] Using EEF radius (= 9.97 ")to estimate initial spatial extent for simple fitting
[Thu Aug  2 03:24:45 2012] Initial guess for spatial extent in simple fitting = 9.97"
[Thu Aug  2 03:24:45 2012] source mask rpix=2.3, npix_max = 31, mask sum = 30, frac = 0.962
[Thu Aug  2 03:24:45 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 9.97"
[Thu Aug  2 11:32:28 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src2.ximg exists
[Thu Aug  2 11:32:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src2.csv
[Thu Aug  2 11:32:28 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src2_1.ximg exists
[Thu Aug  2 11:32:28 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src2.csv
[Thu Aug  2 11:32:28 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 11:32:32 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Thu Aug  2 11:32:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Aug  2 11:32:32 2012] fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Thu Aug  2 11:32:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src2.csv
[Thu Aug  2 11:32:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 11:33:25 2012] Warning: source 1 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 11 at 11.132324 pixels away
[Thu Aug  2 11:33:25 2012] Spatial fit model total counts = 598241.000000, observed total counts = 4014.000000
[Thu Aug  2 11:33:25 2012] Poor agreement between spatial fit and data for source 11
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug  2 11:33:25 2012] Source 11 is offset by 0.212542 and 5.921809 pixels which is larger than
2 X fitted extent = 4.144235 x 4.144235, not incorporating fit results
[Thu Aug  2 11:33:25 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 11:33:25 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 11:33:25 2012] Assessing source extent using major
[Thu Aug  2 11:33:25 2012] Source does appear to be extended
[Thu Aug  2 11:33:25 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 13:10:10 2012] XMMSAS src. selection expression = ellipse(25189.457123, 17439.697418, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug  2 13:10:10 2012] Writing source region out to fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src11_src.reg
[Thu Aug  2 13:10:10 2012] Extracting stamp from image fullrun_mos2_xmm0412593001_pi300-10000_cl_sm2.00.img.gz, (253, 164) - (328, 239)
[Thu Aug  2 13:10:10 2012] XMMSAS bgd. selection expression = annulus(25189.457123, 17439.697418, 1087.500000, 2175.000000, X, Y) && !ellipse(24671.535248, 17452.749542, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23955.429600, 17548.482000, 669.316019, 669.316019, 0.000000, X, Y) && !ellipse(24824.690000, 15193.455800, 1765.528051, 905.112026, 90.000000, X, Y) && !ellipse(24548.432159, 15967.828827, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24984.490204, 15976.850738, 1647.488047, 1235.040658, 359.461606, X, Y) && !ellipse(24788.922000, 16761.395940, 1647.488047, 470.433614, 356.962000, X, Y) && !ellipse(23933.240600, 15796.898000, 749.403222, 749.403222, 0.000000, X, Y) && !ellipse(24020.562000, 16738.366940, 640.266418, 640.266418, 0.000000, X, Y) && !ellipse(22964.570000, 17663.598000, 1620.448047, 1620.448047, 0.000000, X, Y) && !ellipse(24108.488000, 15766.348000, 1059.624030, 1059.624030, 0.000000, X, Y) && !ellipse(25627.122772, 16228.199585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21595.160680, 17635.864000, 1656.736048, 1656.736048, 0.000000, X, Y) && !ellipse(23576.842000, 15760.473600, 1498.808043, 1498.808043, 0.000000, X, Y) && !ellipse(27018.153687, 17405.555069, 870.000000, 870.000000, 0.000000, X, Y)
[Thu Aug  2 13:10:10 2012] Writing fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src11.gif
[Thu Aug  2 13:11:33 2012] Mean detx,y = (768.30, 6932.35) 
[Thu Aug  2 13:11:34 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 13:11:47 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 13:11:47 2012] Setting source spectrum file to fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Aug  2 13:11:47 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Thu Aug  2 14:11:37 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug  2 14:11:37 2012] rmf not generated due to insufficient counts
[Thu Aug  2 16:01:31 2012] Updating aperture counts using extracted products
[Thu Aug  2 16:01:31 2012] Error reading totcts from fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Thu Aug  2 16:01:33 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 16:01:33 2012] Using photon index=1.80, rate=0.119, arf fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src11.arf
[Thu Aug  2 16:01:33 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 16:01:33 2012] Updating source flux to 2.4e-12
[Thu Aug  2 16:05:01 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug  2 16:09:47 2012] xmm0412593001/analysis//spectral/fullrun_mos2_xmm0412593001_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete