[Wed Aug 1 10:14:29 2012] Detection parameters: Position = (263.1, 203.0) = 5 34 38.63 21 55 25.7 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 497.9 +/- 30.1 Background counts = 293.7 Rate = 0.08 +/- 0.005 [Wed Aug 1 10:14:32 2012] Off-axis axis estimate = 7.38' [Wed Aug 1 10:19:45 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting [Wed Aug 1 10:19:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Aug 1 10:19:45 2012] Initial guess for spatial extent in simple fitting = 10.12" [Wed Aug 1 10:19:45 2012] source mask rpix=2.3, npix_max = 31, mask sum = 19, frac = 0.595 [Wed Aug 1 10:19:45 2012] Giving source the simple spatial ID 2 for pass 0, mean size = 10.12" [Wed Aug 1 15:33:32 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src2.ximg exists [Wed Aug 1 15:33:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src2.csv [Wed Aug 1 15:33:32 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src2_1.ximg exists [Wed Aug 1 15:33:32 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src2.csv [Wed Aug 1 15:33:32 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 15:33:33 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Wed Aug 1 15:33:33 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Wed Aug 1 15:33:33 2012] Fit fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly [Wed Aug 1 23:22:52 2012] Warning, spatial fit 2 centroid is now closest to src. 13 [Wed Aug 1 23:22:52 2012] Source 9 is offset by 0.101140 and 5.946368 pixels which is larger than 2 X fitted extent = 1.941559 x 1.941559, not incorporating fit results [Wed Aug 1 23:22:52 2012] Source 9 is offset by -0.517573 and 6.561034 pixels which is larger than 2 X fitted extent = 2.886432 x 2.886432, not incorporating fit results [Wed Aug 1 23:22:52 2012] Vigneting correction estimate = 1.000000 [Wed Aug 1 23:22:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Wed Aug 1 23:22:52 2012] Assessing source extent using major [Wed Aug 1 23:22:52 2012] Source does appear to be extended [Wed Aug 1 23:22:52 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Wed Aug 1 23:22:52 2012] Source is confused with source 10 [Wed Aug 1 23:23:30 2012] Using EEF radius (= 10.12 ")to estimate initial spatial extent for simple fitting [Wed Aug 1 23:23:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass [Wed Aug 1 23:23:30 2012] Initial guess for spatial extent in simple fitting = 10.12" [Wed Aug 1 23:23:30 2012] source mask rpix=2.3, npix_max = 31, mask sum = 19, frac = 0.595 [Wed Aug 1 23:23:30 2012] Giving source the simple spatial ID 2 for pass 1, mean size = 10.12" [Thu Aug 2 03:24:42 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src2.ximg exists [Thu Aug 2 03:24:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src2.csv [Thu Aug 2 03:24:42 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src2_1.ximg exists [Thu Aug 2 03:24:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src2.csv [Thu Aug 2 03:24:42 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src2_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Thu Aug 2 03:24:43 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Thu Aug 2 03:24:43 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Thu Aug 2 03:24:43 2012] Fit fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly [Thu Aug 2 11:32:55 2012] Warning, spatial fit 2 centroid is now closest to src. 13 [Thu Aug 2 11:32:55 2012] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 9 at 12.794086 pixels away [Thu Aug 2 11:32:55 2012] Vigneting correction estimate = 1.000000 [Thu Aug 2 11:32:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Thu Aug 2 11:32:55 2012] Assessing source extent using major [Thu Aug 2 11:32:55 2012] Source does appear to be extended [Thu Aug 2 11:32:55 2012] Computing asymmetry using major and minor axis, asym = 1.00 [Thu Aug 2 11:33:42 2012] XMMSAS src. selection expression = ellipse(22840.149139, 17612.500000, 652.500000, 652.500000, 0.000000, X, Y) [Thu Aug 2 11:33:42 2012] Writing source region out to fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src9_src.reg [Thu Aug 2 11:33:42 2012] Extracting stamp from image fullrun_mos1_xmm0412593001_pi300-10000_cl_sm2.00.img.gz, (226, 166) - (301, 240) [Thu Aug 2 11:33:42 2012] XMMSAS bgd. selection expression = annulus(22840.149139, 17612.500000, 1087.500000, 2175.000000, X, Y) && !ellipse(23300.581665, 17631.440979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20698.232132, 17707.928391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24488.858612, 17615.820114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22023.072000, 17589.976800, 811.912023, 811.912023, 0.000000, X, Y) && !ellipse(24930.688000, 17280.622400, 1571.424045, 1571.424045, 0.000000, X, Y) && !ellipse(21329.842000, 17735.087400, 1081.408031, 1081.408031, 0.000000, X, Y) && !ellipse(25698.890869, 17094.059067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24834.434570, 16231.223663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24324.798000, 16171.916000, 3433.312099, 3433.312099, 0.000000, X, Y) && !ellipse(24290.030000, 15596.198000, 892.784026, 892.784026, 0.000000, X, Y) && !ellipse(24140.993800, 15018.600200, 1716.656049, 1716.656049, 0.000000, X, Y) && !ellipse(24894.422302, 15006.997620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24481.833405, 14568.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24411.624800, 13649.973400, 1841.656053, 1841.656053, 0.000000, X, Y) [Thu Aug 2 11:33:42 2012] Writing fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src9.gif [Thu Aug 2 11:36:08 2012] Mean detx,y = (7100.27, 1375.11) [Thu Aug 2 11:36:09 2012] Setting backscal keywords in source and bgd. spectrum [Thu Aug 2 11:36:21 2012] Binned source spectrum to 10 counts/bin [Thu Aug 2 11:36:21 2012] Setting source spectrum file to fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src9_src_b10.pi.gz [Thu Aug 2 11:36:21 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src9_bgd.pi.gz [Thu Aug 2 12:11:10 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done [Thu Aug 2 12:11:10 2012] rmf not generated due to insufficient counts [Thu Aug 2 16:01:28 2012] Updating aperture counts using extracted products [Thu Aug 2 16:01:28 2012] Error reading totcts from fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src9_src_b10.pi.gz [Thu Aug 2 16:01:30 2012] Calculating source flux in energy range 0.30-8.00 [Thu Aug 2 16:01:30 2012] Using photon index=1.80, rate=0.0769, arf fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src9.arf [Thu Aug 2 16:01:30 2012] Assuming count rate is from the 0.30-10.00 bandpass [Thu Aug 2 16:01:30 2012] Updating source flux to 1.4e-12 [Thu Aug 2 16:01:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Thu Aug 2 16:05:01 2012] xmm0412593001/analysis//spectral/fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete