[Wed Aug  1 10:14:32 2012] Detection parameters:
  Position = (283.8, 100.2) = 5 34 32.14 21 47 55.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 171.7 +/- 21.6
  Background counts = 72.6
  Rate = 0.02 +/- 0.002

[Wed Aug  1 10:14:32 2012] Off-axis axis estimate = 14.41'
[Wed Aug  1 10:19:45 2012] Using EEF radius (= 13.63 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 10:19:45 2012] Initial guess for spatial extent in simple fitting = 13.63"
[Wed Aug  1 10:19:45 2012] source mask rpix=3.1, npix_max = 52, mask sum = 49, frac = 0.927
[Wed Aug  1 10:19:45 2012] Giving source the simple spatial ID 62 for pass 0, mean size = 13.63"
[Wed Aug  1 15:33:33 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src62.ximg exists
[Wed Aug  1 15:33:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src62.csv
[Wed Aug  1 15:33:33 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src62_1.ximg exists
[Wed Aug  1 15:33:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src62.csv
[Wed Aug  1 15:33:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src62_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src62.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 15:33:35 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src62.ximg exists
[Wed Aug  1 15:33:35 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src62_1.ximg exists
[Wed Aug  1 15:33:35 2012] Fit fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src62 appears to have run properly
[Wed Aug  1 23:22:52 2012] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 77 at 12.388570 pixels away
[Wed Aug  1 23:22:52 2012] Source 77 is offset by -5.210034 and -4.779712 pixels which is larger than
2 X fitted extent = 1.503618 x 1.503618, not incorporating fit results
[Wed Aug  1 23:22:52 2012] Spatial fit model total counts = 2083.810000, observed total counts = 2084.000000
[Wed Aug  1 23:22:52 2012] Offset between fit and detection position for source 77 = 0.542159 pixels
[Wed Aug  1 23:22:52 2012] 1806.559000 total counts/ 1759.870000 bgd. counts: snr = 1.112946
Spatial fit parameters:
  Offset between fit and detection position for source 77 = 0.542159 pixels
  Position = (284.3, 100.1) = 5 34 31.98 21 47 55.3
  Extent = 4.6 (3.4-10.4)", rotation angle = 0
  Source counts = 46.7 +/- 42.5
  Background counts = 1759.9
  Rate = 0.005 +/- 0.004
  Deleting source due to low Poisson probability