[Wed Aug  1 10:14:31 2012] Detection parameters:
  Position = (245.3, 203.5) = 5 34 44.20 21 55 24.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 179.0 +/- 29.2
  Background counts = 365.6
  Rate = 0.03 +/- 0.004

[Wed Aug  1 10:14:32 2012] Off-axis axis estimate = 7.89'
[Wed Aug  1 10:19:45 2012] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 10:19:45 2012] Initial guess for spatial extent in simple fitting = 10.37"
[Wed Aug  1 10:19:45 2012] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.751
[Wed Aug  1 10:19:45 2012] Giving source the simple spatial ID 43 for pass 0, mean size = 10.37"
[Wed Aug  1 15:33:33 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src43.ximg exists
[Wed Aug  1 15:33:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src43.csv
[Wed Aug  1 15:33:33 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src43_1.ximg exists
[Wed Aug  1 15:33:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src43.csv
[Wed Aug  1 15:33:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src43_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 15:33:34 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src43.ximg exists
[Wed Aug  1 15:33:35 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src43_1.ximg exists
[Wed Aug  1 15:33:35 2012] Fit fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src43 appears to have run properly
[Wed Aug  1 23:22:52 2012] Spatial fit model total counts = 3537.590000, observed total counts = 3323.000000
[Wed Aug  1 23:22:52 2012] Offset between fit and detection position for source 58 = 0.997843 pixels
[Wed Aug  1 23:22:52 2012] 3528.051000 total counts/ 2818.250000 bgd. counts: snr = 13.370475
Spatial fit parameters:
  Offset between fit and detection position for source 58 = 0.997843 pixels
  Position = (245.7, 204.4) = 5 34 44.06 21 55 29.0
  Extent = 13.5 (9.3-20.7)", rotation angle = 0
  Source counts = 709.8 +/- 59.4
  Background counts = 2818.2
  Rate = 0.07 +/- 0.006
[Wed Aug  1 23:22:52 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 23:22:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 23:22:52 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 23:22:52 2012] Source does appear to be extended
[Wed Aug  1 23:22:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 23:22:52 2012] Source is confused with source 11
[Wed Aug  1 23:23:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  1 23:23:30 2012] Initial guess for spatial extent in simple fitting = 13.52"
[Wed Aug  1 23:23:30 2012] source mask rpix=3.1, npix_max = 52, mask sum = 36, frac = 0.692
[Wed Aug  1 23:23:30 2012] Giving source the simple spatial ID 40 for pass 1, mean size = 13.52"
[Thu Aug  2 03:24:43 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src40.ximg exists
[Thu Aug  2 03:24:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src40.csv
[Thu Aug  2 03:24:43 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src40_1.ximg exists
[Thu Aug  2 03:24:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src40.csv
[Thu Aug  2 03:24:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 03:24:44 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src40.ximg exists
[Thu Aug  2 03:24:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src40.csv
[Thu Aug  2 03:24:44 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src40_1.ximg exists
[Thu Aug  2 03:24:44 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src40.csv
[Thu Aug  2 03:24:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src40_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src40.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 11:32:55 2012] Warning, spatial fit 40 centroid is now closest to src. 11
[Thu Aug  2 11:32:55 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 11:32:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 11:32:55 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 11:32:55 2012] Source does appear to be extended
[Thu Aug  2 11:32:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 11:33:43 2012] XMMSAS src. selection expression = ellipse(21329.842000, 17735.087400, 811.056023, 811.056023, 0.000000, X, Y)
[Thu Aug  2 11:33:43 2012] Writing source region out to fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src58_src.reg
[Thu Aug  2 11:33:43 2012] Extracting stamp from image fullrun_mos1_xmm0412593001_pi300-10000_cl_sm2.00.img.gz, (199, 158) - (292, 251)
[Thu Aug  2 11:33:43 2012] XMMSAS bgd. selection expression = annulus(21329.842000, 17735.087400, 1351.760039, 2703.520078, X, Y) && !ellipse(22840.149139, 17612.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23300.581665, 17631.440979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20698.232132, 17707.928391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24488.858612, 17615.820114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22023.072000, 17589.976800, 811.912023, 811.912023, 0.000000, X, Y) && !ellipse(24930.688000, 17280.622400, 1571.424045, 1571.424045, 0.000000, X, Y) && !ellipse(17776.891449, 20841.137756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17827.716675, 20322.951706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19003.926514, 17750.933228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24834.434570, 16231.223663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24324.798000, 16171.916000, 3433.312099, 3433.312099, 0.000000, X, Y) && !ellipse(24290.030000, 15596.198000, 892.784026, 892.784026, 0.000000, X, Y) && !ellipse(24140.993800, 15018.600200, 1716.656049, 1716.656049, 0.000000, X, Y) && !ellipse(24894.422302, 15006.997620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24481.833405, 14568.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24411.624800, 13649.973400, 1841.656053, 1841.656053, 0.000000, X, Y)
[Thu Aug  2 11:33:43 2012] Writing fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src58.gif
[Thu Aug  2 11:56:14 2012] Mean detx,y = (7130.12, 2857.84) 
[Thu Aug  2 11:56:15 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 11:56:31 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 11:56:32 2012] Setting source spectrum file to fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Thu Aug  2 11:56:32 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src58_bgd.pi.gz
[Thu Aug  2 16:01:29 2012] Updating aperture counts using extracted products
[Thu Aug  2 16:01:29 2012] Error reading totcts from fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src58_src_b10.pi.gz
[Thu Aug  2 16:01:31 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 16:01:31 2012] Using photon index=1.80, rate=0.0686, arf fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src58.arf
[Thu Aug  2 16:01:31 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 16:01:31 2012] Updating source flux to 1.1e-12
[Thu Aug  2 16:01:36 2012] Flag c found in src. 58 procflags, skipping spectral fitting