[Wed Aug 1 10:14:30 2012] Detection parameters: Position = (377.0, 303.0) = 5 34 3.00 22 2 37.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 137.9 +/- 25.7 Background counts = 244.9 Rate = 0.02 +/- 0.004 [Wed Aug 1 10:14:32 2012] Off-axis axis estimate = 5.70' [Wed Aug 1 10:19:45 2012] Using EEF radius (= 9.28 ")to estimate initial spatial extent for simple fitting [Wed Aug 1 10:19:45 2012] Initial guess for spatial extent in simple fitting = 9.28" [Wed Aug 1 10:19:45 2012] source mask rpix=2.1, npix_max = 27, mask sum = 36, frac = 1.298 [Wed Aug 1 10:19:45 2012] Giving source the simple spatial ID 24 for pass 0, mean size = 9.28" [Wed Aug 1 15:33:32 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src24.ximg exists [Wed Aug 1 15:33:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src24.csv [Wed Aug 1 15:33:32 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src24_1.ximg exists [Wed Aug 1 15:33:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src24.csv [Wed Aug 1 15:33:32 2012] It looks like the fit did not converge You should probably delete fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src24_1.ximg Either tweak this fit manually starting from fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src24.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Wed Aug 1 15:33:34 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src24.ximg exists [Wed Aug 1 15:33:34 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src24_1.ximg exists [Wed Aug 1 15:33:34 2012] Fit fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src24 appears to have run properly [Wed Aug 1 23:22:52 2012] Warning, spatial fit 24 centroid is now closest to src. 34 [Wed Aug 1 23:22:52 2012] Spatial fit model total counts = 3946.770000, observed total counts = 3873.000000 [Wed Aug 1 23:22:52 2012] Offset between fit and detection position for source 33 = 1.331783 pixels [Wed Aug 1 23:22:52 2012] Warning, changing simple spatial fit ID from 24 to 25 [Wed Aug 1 23:22:52 2012] 3794.705600 total counts/ 3742.860000 bgd. counts: snr = 0.847442 Spatial fit parameters: Offset between fit and detection position for source 33 = 1.331783 pixels Position = (378.3, 302.8) = 5 34 2.59 22 2 37.1 Extent = 8.5 (3.6-18.1)", rotation angle = 0 Source counts = 51.8 +/- 61.6 Background counts = 3742.9 Rate = 0.005 +/- 0.006 Deleting source due to low Poisson probability