[Wed Aug  1 10:14:29 2012] Detection parameters:
  Position = (281.5, 125.9) = 5 34 32.86 21 49 45.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 280.6 +/- 26.5
  Background counts = 105.2
  Rate = 0.03 +/- 0.003

[Wed Aug  1 10:14:32 2012] Off-axis axis estimate = 12.57'
[Wed Aug  1 10:19:45 2012] Using EEF radius (= 12.71 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 10:19:45 2012] Initial guess for spatial extent in simple fitting = 12.71"
[Wed Aug  1 10:19:45 2012] source mask rpix=2.9, npix_max = 46, mask sum = 49, frac = 1.046
[Wed Aug  1 10:19:45 2012] Giving source the simple spatial ID 10 for pass 0, mean size = 12.71"
[Wed Aug  1 15:33:32 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src10.ximg exists
[Wed Aug  1 15:33:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src10.csv
[Wed Aug  1 15:33:32 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src10_1.ximg exists
[Wed Aug  1 15:33:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src10.csv
[Wed Aug  1 15:33:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 15:33:34 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Wed Aug  1 15:33:34 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Wed Aug  1 15:33:34 2012] Fit fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src10 appears to have run properly
[Wed Aug  1 23:22:52 2012] Warning, spatial fit 10 centroid is now closest to src. 15
[Wed Aug  1 23:22:52 2012] Spatial fit model total counts = 4156.980000, observed total counts = 4162.000000
[Wed Aug  1 23:22:52 2012] Offset between fit and detection position for source 18 = 2.921816 pixels
[Wed Aug  1 23:22:52 2012] Warning, changing simple spatial fit ID from 10 to 58
[Wed Aug  1 23:22:52 2012] 3885.639000 total counts/ 3480.720000 bgd. counts: snr = 6.863310
Spatial fit parameters:
  Offset between fit and detection position for source 18 = 2.921816 pixels
  Position = (282.9, 128.5) = 5 34 32.44 21 49 58.8
  Extent = 24.8 (15.9-49.6)" x 16.8 (10.1-23.3)", rotation angle = 90 (90-90) degrees
  Source counts = 404.9 +/- 62.3
  Background counts = 3480.7
  Rate = 0.04 +/- 0.006
[Wed Aug  1 23:22:52 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 23:22:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 23:22:52 2012] Assessing source extent using major axis lower bound
[Wed Aug  1 23:22:52 2012] Source does appear to be extended
[Wed Aug  1 23:22:52 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.68
[Wed Aug  1 23:22:52 2012] Source is confused with source 15
[Wed Aug  1 23:23:30 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Wed Aug  1 23:23:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  1 23:23:30 2012] Initial guess for spatial extent in simple fitting = 20.77"
[Wed Aug  1 23:23:30 2012] source mask rpix=4.8, npix_max = 111, mask sum = 110, frac = 0.988
[Wed Aug  1 23:23:30 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 20.77"
[Thu Aug  2 03:24:42 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src10.ximg exists
[Thu Aug  2 03:24:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src10.csv
[Thu Aug  2 03:24:42 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src10_1.ximg exists
[Thu Aug  2 03:24:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src10.csv
[Thu Aug  2 03:24:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 03:24:43 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Thu Aug  2 03:24:43 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Thu Aug  2 03:24:43 2012] Fit fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src10 appears to have run properly
[Thu Aug  2 11:32:55 2012] Warning, spatial fit 10 centroid is now closest to src. 21
[Thu Aug  2 11:32:55 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 11:32:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 11:32:55 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 11:32:55 2012] Source does appear to be extended
[Thu Aug  2 11:32:55 2012] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.68
[Thu Aug  2 11:33:42 2012] XMMSAS src. selection expression = ellipse(24560.704000, 11130.174000, 1487.430043, 1005.054029, 90.000000, X, Y)
[Thu Aug  2 11:33:42 2012] Writing source region out to fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src18_src.reg
[Thu Aug  2 11:33:42 2012] Extracting stamp from image fullrun_mos1_xmm0412593001_pi300-10000_cl_sm2.00.img.gz, (197, 43) - (368, 214)
[Thu Aug  2 11:33:42 2012] XMMSAS bgd. selection expression = annulus(24560.704000, 11130.174000, 2479.050071, 4958.100143, X, Y) && !ellipse(24930.688000, 17280.622400, 1571.424045, 1571.424045, 0.000000, X, Y) && !ellipse(24494.426000, 11853.054000, 1960.088056, 1960.088056, 0.000000, X, Y) && !ellipse(24432.866699, 11432.700272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24246.212830, 8204.744194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24307.536041, 10479.354256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24502.250600, 9972.930000, 1376.928040, 1376.928040, 0.000000, X, Y) && !ellipse(24209.714142, 9000.344299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24834.434570, 16231.223663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24324.798000, 16171.916000, 3433.312099, 3433.312099, 0.000000, X, Y) && !ellipse(24290.030000, 15596.198000, 892.784026, 892.784026, 0.000000, X, Y) && !ellipse(24140.993800, 15018.600200, 1716.656049, 1716.656049, 0.000000, X, Y) && !ellipse(24894.422302, 15006.997620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24481.833405, 14568.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24139.831116, 14130.423767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24411.624800, 13649.973400, 1841.656053, 1841.656053, 0.000000, X, Y) && !ellipse(24129.595978, 12740.465485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24564.617218, 12910.729858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25057.512787, 11621.139648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23551.269531, 11174.565048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24087.067719, 10053.567207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24213.326800, 7774.386000, 2214.520064, 2214.520064, 0.000000, X, Y)
[Thu Aug  2 11:33:42 2012] Writing fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src18.gif
[Thu Aug  2 11:44:20 2012] Mean detx,y = (13364.38, -512.33) 
[Thu Aug  2 11:44:21 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 11:44:43 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 11:44:43 2012] Setting source spectrum file to fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Aug  2 11:44:43 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src18_bgd.pi.gz
[Thu Aug  2 16:01:28 2012] Updating aperture counts using extracted products
[Thu Aug  2 16:01:28 2012] Error reading totcts from fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src18_src_b10.pi.gz
[Thu Aug  2 16:01:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 16:01:30 2012] Using photon index=1.80, rate=0.0391, arf fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src18.arf
[Thu Aug  2 16:01:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 16:01:30 2012] Updating source flux to 8.8e-13
[Thu Aug  2 16:01:36 2012] Flag c found in src. 18 procflags, skipping spectral fitting