[Wed Aug  1 10:14:29 2012] Detection parameters:
  Position = (279.6, 138.9) = 5 34 33.47 21 50 44.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 245.2 +/- 26.8
  Background counts = 130.5
  Rate = 0.02 +/- 0.003

[Wed Aug  1 10:14:32 2012] Off-axis axis estimate = 11.64'
[Wed Aug  1 10:19:45 2012] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 10:19:45 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  1 10:19:45 2012] Initial guess for spatial extent in simple fitting = 12.25"
[Wed Aug  1 10:19:45 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.955
[Wed Aug  1 10:19:45 2012] Giving source the simple spatial ID 7 for pass 0, mean size = 12.25"
[Wed Aug  1 15:33:32 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src7.ximg exists
[Wed Aug  1 15:33:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src7.csv
[Wed Aug  1 15:33:32 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src7_1.ximg exists
[Wed Aug  1 15:33:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src7.csv
[Wed Aug  1 15:33:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 15:33:33 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Wed Aug  1 15:33:34 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Wed Aug  1 15:33:34 2012] Fit fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Wed Aug  1 23:22:52 2012] Warning, spatial fit 7 centroid is now closest to src. 70
[Wed Aug  1 23:22:52 2012] Source 15 is offset by 5.447126 and 0.267684 pixels which is larger than
2 X fitted extent = 1.461292 x 1.461292, not incorporating fit results
[Wed Aug  1 23:22:52 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 23:22:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 23:22:52 2012] Assessing source extent using major
[Wed Aug  1 23:22:52 2012] Source does appear to be extended
[Wed Aug  1 23:22:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 23:22:52 2012] Source is confused with source 16
[Wed Aug  1 23:22:52 2012] Source is confused with source 18
[Wed Aug  1 23:23:30 2012] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 23:23:30 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Wed Aug  1 23:23:30 2012] Initial guess for spatial extent in simple fitting = 12.25"
[Wed Aug  1 23:23:30 2012] source mask rpix=2.8, npix_max = 43, mask sum = 42, frac = 0.955
[Wed Aug  1 23:23:30 2012] Giving source the simple spatial ID 7 for pass 1, mean size = 12.25"
[Thu Aug  2 03:24:42 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src7.ximg exists
[Thu Aug  2 03:24:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src7.csv
[Thu Aug  2 03:24:42 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src7_1.ximg exists
[Thu Aug  2 03:24:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src7.csv
[Thu Aug  2 03:24:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 03:24:43 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Thu Aug  2 03:24:43 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Thu Aug  2 03:24:43 2012] Fit fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src7 appears to have run properly
[Thu Aug  2 11:32:55 2012] Spatial fit model total counts = 2855.570000, observed total counts = 2855.000000
[Thu Aug  2 11:32:55 2012] Offset between fit and detection position for source 15 = 3.296834 pixels
[Thu Aug  2 11:32:55 2012] 2343.970000 total counts/ 1241.200000 bgd. counts: snr = 31.301421
Spatial fit parameters:
  Offset between fit and detection position for source 15 = 3.296834 pixels
  Position = (282.1, 136.8) = 5 34 32.68 21 50 35.0
  Extent = 24.5 (24.5-49.0)", rotation angle = 0
  Source counts = 1102.8 +/- 48.4
  Background counts = 1241.2
  Rate = 0.1 +/- 0.005
[Thu Aug  2 11:32:55 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 11:32:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 11:32:55 2012] Assessing source extent using major axis lower bound
[Thu Aug  2 11:32:55 2012] Source does appear to be extended
[Thu Aug  2 11:32:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 11:33:42 2012] Counts = 1102.770000, rescaling region sizes by 2.000000
[Thu Aug  2 11:33:42 2012] XMMSAS src. selection expression = ellipse(24494.426000, 11853.054000, 2940.132085, 2940.132085, 0.000000, X, Y)
[Thu Aug  2 11:33:42 2012] Writing source region out to fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src15_src.reg
[Thu Aug  2 11:33:42 2012] Extracting stamp from image fullrun_mos1_xmm0412593001_pi300-10000_cl_sm2.00.img.gz, (113, 0) - (451, 306)
[Thu Aug  2 11:33:42 2012] XMMSAS bgd. selection expression = annulus(24494.426000, 11853.054000, 9800.440282, 19600.880564, X, Y) && !ellipse(18164.841675, 28601.645020, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31578.182434, 27525.835114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31606.463806, 27086.459625, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17997.187195, 26059.353577, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31489.000000, 25522.814636, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17912.366974, 24043.602234, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17895.191589, 23012.473816, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22840.149139, 17612.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23300.581665, 17631.440979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20698.232132, 17707.928391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24488.858612, 17615.820114, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22023.072000, 17589.976800, 811.912023, 811.912023, 0.000000, X, Y) && !ellipse(24930.688000, 17280.622400, 1571.424045, 1571.424045, 0.000000, X, Y) && !ellipse(24432.866699, 11432.700272, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24246.212830, 8204.744194, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24560.704000, 11130.174000, 1983.240057, 1340.072039, 90.000000, X, Y) && !ellipse(24307.536041, 10479.354256, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24502.250600, 9972.930000, 1376.928040, 1376.928040, 0.000000, X, Y) && !ellipse(24209.714142, 9000.344299, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31414.717590, 30144.633881, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31952.578735, 29178.216492, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32219.042786, 28308.702362, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31655.549988, 28305.712799, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17723.934235, 27898.850800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32437.421600, 27715.154633, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17717.811737, 27094.347717, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31586.816589, 26559.420380, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32168.175079, 25696.705780, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17334.477280, 25711.162415, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32163.332306, 24990.348511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17825.137314, 25434.033112, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31495.560577, 24917.372375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31587.052887, 24456.116791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32803.853945, 24136.666325, 562.445587, 203.963206, 96.348737, X, Y) && !ellipse(32294.395172, 23788.698181, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31805.418000, 23703.023600, 740.069621, 740.069621, 0.000000, X, Y) && !ellipse(31550.814392, 23084.871155, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32768.363037, 22780.304779, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17676.938889, 22477.583649, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31496.434082, 22402.650757, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17767.292191, 21984.219467, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33078.242000, 22016.855600, 1555.168045, 1555.168045, 0.000000, X, Y) && !ellipse(31489.000000, 21960.575104, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32215.386810, 21600.312851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17462.370041, 21265.574722, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17776.891449, 20841.137756, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(17827.716675, 20322.951706, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31968.081451, 20410.855743, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19003.926514, 17750.933228, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25928.588074, 17530.670670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21329.842000, 17735.087400, 1081.408031, 1081.408031, 0.000000, X, Y) && !ellipse(25698.890869, 17094.059067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24834.434570, 16231.223663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24324.798000, 16171.916000, 3433.312099, 3433.312099, 0.000000, X, Y) && !ellipse(24290.030000, 15596.198000, 892.784026, 892.784026, 0.000000, X, Y) && !ellipse(24140.993800, 15018.600200, 1716.656049, 1716.656049, 0.000000, X, Y) && !ellipse(24894.422302, 15006.997620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24481.833405, 14568.869995, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24139.831116, 14130.423767, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24411.624800, 13649.973400, 1841.656053, 1841.656053, 0.000000, X, Y) && !ellipse(24129.595978, 12740.465485, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24564.617218, 12910.729858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25057.512787, 11621.139648, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23551.269531, 11174.565048, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24087.067719, 10053.567207, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24213.326800, 7774.386000, 2214.520064, 2214.520064, 0.000000, X, Y)
[Thu Aug  2 11:33:42 2012] Writing fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src15.gif
[Thu Aug  2 11:38:11 2012] Mean detx,y = (12348.35, -389.30) 
[Thu Aug  2 11:38:13 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 11:43:47 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 11:43:47 2012] Setting source spectrum file to fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Aug  2 11:43:47 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src15_bgd.pi.gz
[Thu Aug  2 16:01:28 2012] Updating aperture counts using extracted products
[Thu Aug  2 16:01:28 2012] Error reading totcts from fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src15_src_b10.pi.gz
[Thu Aug  2 16:01:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 16:01:30 2012] Using photon index=1.80, rate=0.107, arf fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src15.arf
[Thu Aug  2 16:01:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 16:01:30 2012] Updating source flux to 2.1e-12
[Thu Aug  2 16:01:36 2012] Flag b found in src. 15 procflags, skipping spectral fitting
[Thu Aug  2 16:01:36 2012] Flag c found in src. 15 procflags, skipping spectral fitting