[Wed Aug  1 10:14:29 2012] Detection parameters:
  Position = (282.0, 203.0) = 5 34 32.70 21 55 32.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 487.1 +/- 32.6
  Background counts = 378.9
  Rate = 0.09 +/- 0.006

[Wed Aug  1 10:14:32 2012] Off-axis axis estimate = 7.02'
[Wed Aug  1 10:19:45 2012] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 10:19:45 2012] Initial guess for spatial extent in simple fitting = 9.94"
[Wed Aug  1 10:19:45 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.161
[Wed Aug  1 10:19:45 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 9.94"
[Wed Aug  1 15:33:32 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src4.ximg exists
[Wed Aug  1 15:33:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src4.csv
[Wed Aug  1 15:33:32 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src4_1.ximg exists
[Wed Aug  1 15:33:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src4.csv
[Wed Aug  1 15:33:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 15:33:33 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Wed Aug  1 15:33:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Aug  1 15:33:33 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Wed Aug  1 15:33:33 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src4.csv
[Wed Aug  1 15:33:33 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593001_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Wed Aug  1 23:22:52 2012] Warning, spatial fit 4 centroid is now closest to src. 10
[Wed Aug  1 23:22:52 2012] Spatial fit model total counts = 7324.030000, observed total counts = 6626.000000
[Wed Aug  1 23:22:52 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Wed Aug  1 23:22:52 2012] Vigneting correction estimate = 1.000000
[Wed Aug  1 23:22:52 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Wed Aug  1 23:22:52 2012] Assessing source extent using major
[Wed Aug  1 23:22:52 2012] Source does appear to be extended
[Wed Aug  1 23:22:52 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Wed Aug  1 23:22:52 2012] Source is confused with source 14
[Wed Aug  1 23:23:30 2012] Using EEF radius (= 9.94 ")to estimate initial spatial extent for simple fitting
[Wed Aug  1 23:23:30 2012] Initial guess for spatial extent in simple fitting = 9.94"
[Wed Aug  1 23:23:30 2012] source mask rpix=2.3, npix_max = 31, mask sum = 36, frac = 1.161
[Wed Aug  1 23:23:30 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.94"
[Thu Aug  2 03:24:42 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src4.ximg exists
[Thu Aug  2 03:24:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src4.csv
[Thu Aug  2 03:24:42 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src4_1.ximg exists
[Thu Aug  2 03:24:42 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src4.csv
[Thu Aug  2 03:24:42 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 03:24:43 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Thu Aug  2 03:24:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Aug  2 03:24:43 2012] fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Thu Aug  2 03:24:43 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src4.csv
[Thu Aug  2 03:24:43 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412593001_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Thu Aug  2 11:32:55 2012] Source 12 is offset by 3.333386 and -6.135378 pixels which is larger than
2 X fitted extent = 4.290469 x 4.290469, not incorporating fit results
[Thu Aug  2 11:32:55 2012] Spatial fit model total counts = 7324.050000, observed total counts = 6626.000000
[Thu Aug  2 11:32:55 2012] Poor agreement between spatial fit and data for source 12
It may help to tweak spatial fit manually
Not incorporating fit results
[Thu Aug  2 11:32:55 2012] Vigneting correction estimate = 1.000000
[Thu Aug  2 11:32:55 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Thu Aug  2 11:32:55 2012] Assessing source extent using major
[Thu Aug  2 11:32:55 2012] Source does appear to be extended
[Thu Aug  2 11:32:55 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Thu Aug  2 11:33:42 2012] XMMSAS src. selection expression = ellipse(24488.858612, 17615.820114, 652.500000, 652.500000, 0.000000, X, Y)
[Thu Aug  2 11:33:42 2012] Writing source region out to fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src12_src.reg
[Thu Aug  2 11:33:42 2012] Extracting stamp from image fullrun_mos1_xmm0412593001_pi300-10000_cl_sm2.00.img.gz, (245, 166) - (320, 241)
[Thu Aug  2 11:33:42 2012] XMMSAS bgd. selection expression = annulus(24488.858612, 17615.820114, 1087.500000, 2175.000000, X, Y) && !ellipse(22840.149139, 17612.500000, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23300.581665, 17631.440979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22023.072000, 17589.976800, 811.912023, 811.912023, 0.000000, X, Y) && !ellipse(24930.688000, 17280.622400, 1571.424045, 1571.424045, 0.000000, X, Y) && !ellipse(25928.588074, 17530.670670, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21329.842000, 17735.087400, 1081.408031, 1081.408031, 0.000000, X, Y) && !ellipse(25698.890869, 17094.059067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24834.434570, 16231.223663, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24324.798000, 16171.916000, 3433.312099, 3433.312099, 0.000000, X, Y) && !ellipse(24290.030000, 15596.198000, 892.784026, 892.784026, 0.000000, X, Y) && !ellipse(24140.993800, 15018.600200, 1716.656049, 1716.656049, 0.000000, X, Y) && !ellipse(24894.422302, 15006.997620, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24411.624800, 13649.973400, 1841.656053, 1841.656053, 0.000000, X, Y)
[Thu Aug  2 11:33:42 2012] Writing fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src12.gif
[Thu Aug  2 11:37:00 2012] Mean detx,y = (7076.16, -249.24) 
[Thu Aug  2 11:37:01 2012] Setting backscal keywords in source and bgd. spectrum
[Thu Aug  2 11:37:11 2012] Binned source spectrum to 10 counts/bin
[Thu Aug  2 11:37:11 2012] Setting source spectrum file to fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Aug  2 11:37:11 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Thu Aug  2 12:11:42 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Thu Aug  2 12:11:42 2012] rmf not generated due to insufficient counts
[Thu Aug  2 16:01:28 2012] Updating aperture counts using extracted products
[Thu Aug  2 16:01:28 2012] Error reading totcts from fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Thu Aug  2 16:01:30 2012] Calculating source flux in energy range 0.30-8.00
[Thu Aug  2 16:01:30 2012] Using photon index=1.80, rate=0.0934, arf fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src12.arf
[Thu Aug  2 16:01:30 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Thu Aug  2 16:01:30 2012] Updating source flux to 1.7e-12
[Thu Aug  2 16:01:36 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Thu Aug  2 16:05:01 2012] xmm0412593001/analysis//spectral/fullrun_mos1_xmm0412593001_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete