[Fri Dec 16 13:06:19 2011] Detection parameters:
  Position = (323.9, 237.0) = 5 34 27.52 21 54 58.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 306.5 +/- 27.7
  Background counts = 175.7
  Rate = 0.08 +/- 0.007

[Fri Dec 16 13:06:19 2011] Off-axis axis estimate = 4.82'
[Fri Dec 16 16:12:30 2011] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:12:30 2011] Initial guess for spatial extent in simple fitting = 8.84"
[Fri Dec 16 16:12:30 2011] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.780
[Fri Dec 16 16:12:30 2011] Giving source the simple spatial ID 11 for pass 0, mean size = 8.84"
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src11.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src11.csv
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src11_1.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src11.csv
[Fri Dec 16 22:06:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src11_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src11.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src11.ximg exists
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src11_1.ximg exists
[Fri Dec 16 22:06:29 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src11 appears to have run properly
[Fri Dec 16 22:06:52 2011] Warning, spatial fit 11 centroid is now closest to src. 84
[Fri Dec 16 22:06:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:53 2011] Assessing source extent using major
[Fri Dec 16 22:06:53 2011] Source does appear to be extended
[Fri Dec 16 22:06:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:53 2011] Source is confused with source 87
[Sat Dec 17 06:58:27 2011] Using EEF radius (= 8.84 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:58:27 2011] Initial guess for spatial extent in simple fitting = 8.84"
[Sat Dec 17 06:58:27 2011] source mask rpix=2.0, npix_max = 25, mask sum = 20, frac = 0.780
[Sat Dec 17 06:58:27 2011] Giving source the simple spatial ID 8 for pass 1, mean size = 8.84"
[Sat Dec 17 17:06:15 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src8.ximg exists
[Sat Dec 17 17:06:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src8.csv
[Sat Dec 17 17:06:15 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src8_1.ximg exists
[Sat Dec 17 17:06:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src8.csv
[Sat Dec 17 17:06:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src8.ximg exists
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src8_1.ximg exists
[Sat Dec 17 17:06:18 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src8 appears to have run properly
[Sat Dec 17 17:06:54 2011] Warning, spatial fit 8 centroid is now closest to src. 94
[Sat Dec 17 17:06:54 2011] Warning: source 20 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 85 at 10.573619 pixels away
[Sat Dec 17 17:06:54 2011] Warning: source 38 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 85 at 22.604131 pixels away
[Sat Dec 17 17:06:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:54 2011] Assessing source extent using major
[Sat Dec 17 17:06:54 2011] Source does appear to be extended
[Sat Dec 17 17:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 19:21:43 2011] XMMSAS src. selection expression = ellipse(28129.073700, 20566.424530, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 17 19:21:43 2011] Writing source region out to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src85_src.reg
[Sat Dec 17 19:21:43 2011] Extracting stamp from image fullrun_mos2_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (286, 199) - (361, 274)
[Sat Dec 17 19:21:43 2011] XMMSAS bgd. selection expression = annulus(28129.073700, 20566.424530, 1087.500000, 2175.000000, X, Y) && !ellipse(28355.619385, 19304.211655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27158.069000, 20469.674000, 1400.904040, 1400.904040, 0.000000, X, Y) && !ellipse(29308.038000, 20811.464400, 1066.072031, 1066.072031, 0.000000, X, Y) && !ellipse(27506.120000, 20039.348000, 523.063215, 523.063215, 0.000000, X, Y) && !ellipse(28385.027200, 18874.946000, 610.303218, 610.303218, 0.000000, X, Y) && !ellipse(28501.932065, 20631.300230, 1599.920046, 1411.999836, 6.683464, X, Y) && !ellipse(25983.240000, 20385.549240, 1401.096040, 1401.096040, 0.000000, X, Y) && !ellipse(29201.557169, 19738.624267, 1490.176043, 746.481061, -0.000000, X, Y) && !ellipse(30790.729950, 20659.920059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30055.610748, 19968.926117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30094.902000, 20751.426000, 1990.720057, 1990.720057, 0.000000, X, Y) && !ellipse(30367.831573, 20859.380463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30451.348000, 19936.810800, 1511.624043, 1511.624043, 0.000000, X, Y)
[Sat Dec 17 19:21:43 2011] Writing fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src85.gif
[Sat Dec 17 19:30:47 2011] Mean detx,y = (-462.37, -7259.80) 
[Sat Dec 17 19:30:48 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 19:31:02 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 19:31:03 2011] Setting source spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Sat Dec 17 19:31:03 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src85_bgd.pi.gz
[Sat Dec 17 20:54:35 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 17 20:54:35 2011] rmf not generated due to insufficient counts
[Sat Dec 17 23:22:06 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:22:06 2011] Error reading totcts from fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src85_src_b10.pi.gz
[Sat Dec 17 23:22:11 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:11 2011] Using photon index=1.80, rate=0.0823, arf fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src85.arf
[Sat Dec 17 23:22:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:11 2011] Updating source flux to 1.6e-12
[Sat Dec 17 23:30:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting