[Fri Dec 16 13:06:18 2011] Detection parameters:
  Position = (344.9, 239.1) = 5 34 20.95 21 55 3.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 145.2 +/- 23.0
  Background counts = 162.0
  Rate = 0.04 +/- 0.006

[Fri Dec 16 13:06:19 2011] Off-axis axis estimate = 5.46'
[Fri Dec 16 16:12:30 2011] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:12:30 2011] Initial guess for spatial extent in simple fitting = 9.16"
[Fri Dec 16 16:12:30 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.105
[Fri Dec 16 16:12:30 2011] Giving source the simple spatial ID 58 for pass 0, mean size = 9.16"
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src58.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src58.csv
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src58_1.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src58.csv
[Fri Dec 16 22:06:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src58_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src58.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:30 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src58.ximg exists
[Fri Dec 16 22:06:30 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src58_1.ximg exists
[Fri Dec 16 22:06:30 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src58 appears to have run properly
[Fri Dec 16 22:06:53 2011] Warning, spatial fit 58 centroid is now closest to src. 93
[Fri Dec 16 22:06:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:53 2011] Assessing source extent using major
[Fri Dec 16 22:06:53 2011] Source does appear to be extended
[Fri Dec 16 22:06:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:53 2011] Source is confused with source 82
[Fri Dec 16 22:06:53 2011] Source is confused with source 86
[Sat Dec 17 06:58:27 2011] Using EEF radius (= 9.16 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:58:27 2011] Initial guess for spatial extent in simple fitting = 9.16"
[Sat Dec 17 06:58:27 2011] source mask rpix=2.1, npix_max = 27, mask sum = 30, frac = 1.105
[Sat Dec 17 06:58:27 2011] Giving source the simple spatial ID 52 for pass 1, mean size = 9.16"
[Sat Dec 17 17:06:17 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src52.ximg exists
[Sat Dec 17 17:06:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src52.csv
[Sat Dec 17 17:06:17 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src52_1.ximg exists
[Sat Dec 17 17:06:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src52.csv
[Sat Dec 17 17:06:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src52_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src52.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 17:06:19 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src52.ximg exists
[Sat Dec 17 17:06:19 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src52_1.ximg exists
[Sat Dec 17 17:06:19 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src52 appears to have run properly
[Sat Dec 17 17:06:54 2011] Warning, spatial fit 52 centroid is now closest to src. 81
[Sat Dec 17 17:06:54 2011] Warning: source 55 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 83 at 11.280200 pixels away
[Sat Dec 17 17:06:54 2011] Spatial fit model total counts = 2079.890000, observed total counts = 2079.000000
[Sat Dec 17 17:06:54 2011] Offset between fit and detection position for source 83 = 1.596313 pixels
[Sat Dec 17 17:06:54 2011] Warning, changing simple spatial fit ID from 52 to 72
[Sat Dec 17 17:06:54 2011] 1969.338000 total counts/ 1753.340000 bgd. counts: snr = 5.158420
Spatial fit parameters:
  Offset between fit and detection position for source 83 = 1.596313 pixels
  Position = (346.5, 239.1) = 5 34 20.45 21 55 2.0
  Extent = 24.9 (24.2-25.2)", rotation angle = 0
  Source counts = 216.0 +/- 44.4
  Background counts = 1753.3
  Rate = 0.04 +/- 0.008
[Sat Dec 17 17:06:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:54 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 17:06:54 2011] Source does appear to be extended
[Sat Dec 17 17:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 19:21:45 2011] XMMSAS src. selection expression = ellipse(30094.902000, 20751.426000, 1493.040043, 1493.040043, 0.000000, X, Y)
[Sat Dec 17 19:21:45 2011] Writing source region out to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src83_src.reg
[Sat Dec 17 19:21:45 2011] Extracting stamp from image fullrun_mos2_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (261, 153) - (432, 325)
[Sat Dec 17 19:21:45 2011] XMMSAS bgd. selection expression = annulus(30094.902000, 20751.426000, 2488.400072, 4976.800143, X, Y) && !ellipse(28355.619385, 19304.211655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28129.073700, 20566.424530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27158.069000, 20469.674000, 1400.904040, 1400.904040, 0.000000, X, Y) && !ellipse(29308.038000, 20811.464400, 1066.072031, 1066.072031, 0.000000, X, Y) && !ellipse(27506.120000, 20039.348000, 523.063215, 523.063215, 0.000000, X, Y) && !ellipse(34024.223755, 25016.888184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34067.160889, 24581.306732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28385.027200, 18874.946000, 610.303218, 610.303218, 0.000000, X, Y) && !ellipse(28501.932065, 20631.300230, 1599.920046, 1411.999836, 6.683464, X, Y) && !ellipse(25983.240000, 20385.549240, 1401.096040, 1401.096040, 0.000000, X, Y) && !ellipse(33931.903076, 26147.888184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29201.557169, 19738.624267, 1490.176043, 746.481061, -0.000000, X, Y) && !ellipse(34139.438751, 25522.174774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34395.349060, 24138.272614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30790.729950, 20659.920059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30055.610748, 19968.926117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30367.831573, 20859.380463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34436.154205, 23643.051239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32276.678000, 21066.237400, 1705.848049, 1705.848049, 0.000000, X, Y) && !ellipse(30451.348000, 19936.810800, 1511.624043, 1511.624043, 0.000000, X, Y)
[Sat Dec 17 19:21:45 2011] Writing fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src83.gif
[Sat Dec 17 20:16:59 2011] Mean detx,y = (-2300.29, -7554.65) 
[Sat Dec 17 20:17:00 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 20:17:30 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 20:17:30 2011] Setting source spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Sat Dec 17 20:17:30 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src83_bgd.pi.gz
[Sat Dec 17 23:22:09 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:22:09 2011] Error reading totcts from fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src83_src_b10.pi.gz
[Sat Dec 17 23:22:13 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:13 2011] Using photon index=1.80, rate=0.0411, arf fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src83.arf
[Sat Dec 17 23:22:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:13 2011] Updating source flux to 6e-13
[Sat Dec 17 23:30:21 2011] Flag c found in src. 83 procflags, skipping spectral fitting