[Fri Dec 16 13:06:18 2011] Detection parameters:
  Position = (354.5, 238.0) = 5 34 17.95 21 54 45.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 138.4 +/- 21.9
  Background counts = 156.9
  Rate = 0.04 +/- 0.006

[Fri Dec 16 13:06:19 2011] Off-axis axis estimate = 5.97'
[Fri Dec 16 16:12:30 2011] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:12:30 2011] Initial guess for spatial extent in simple fitting = 9.42"
[Fri Dec 16 16:12:30 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.880
[Fri Dec 16 16:12:30 2011] Giving source the simple spatial ID 56 for pass 0, mean size = 9.42"
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src56.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src56.csv
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src56_1.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src56.csv
[Fri Dec 16 22:06:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src56_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src56.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:30 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src56.ximg exists
[Fri Dec 16 22:06:30 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src56_1.ximg exists
[Fri Dec 16 22:06:30 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src56 appears to have run properly
[Fri Dec 16 22:06:53 2011] Warning, spatial fit 56 centroid is now closest to src. 86
[Fri Dec 16 22:06:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:53 2011] Assessing source extent using major
[Fri Dec 16 22:06:53 2011] Source does appear to be extended
[Fri Dec 16 22:06:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:53 2011] Source is confused with source 82
[Fri Dec 16 22:06:53 2011] Source is confused with source 86
[Sat Dec 17 06:58:27 2011] Using EEF radius (= 9.42 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:58:27 2011] Initial guess for spatial extent in simple fitting = 9.42"
[Sat Dec 17 06:58:27 2011] source mask rpix=2.2, npix_max = 28, mask sum = 25, frac = 0.880
[Sat Dec 17 06:58:27 2011] Giving source the simple spatial ID 50 for pass 1, mean size = 9.42"
[Sat Dec 17 17:06:17 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src50.ximg exists
[Sat Dec 17 17:06:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src50.csv
[Sat Dec 17 17:06:17 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src50_1.ximg exists
[Sat Dec 17 17:06:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src50.csv
[Sat Dec 17 17:06:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src50_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src50.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 17:06:19 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src50.ximg exists
[Sat Dec 17 17:06:19 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src50_1.ximg exists
[Sat Dec 17 17:06:19 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src50 appears to have run properly
[Sat Dec 17 17:06:54 2011] Warning: source 50 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 81 at 11.227153 pixels away
[Sat Dec 17 17:06:54 2011] Source 81 is offset by 1.050712 and 6.451012 pixels which is larger than
2 X fitted extent = 1.052897 x 1.052897, not incorporating fit results
[Sat Dec 17 17:06:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:54 2011] Assessing source extent using major
[Sat Dec 17 17:06:54 2011] Source does appear to be extended
[Sat Dec 17 17:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 19:21:45 2011] XMMSAS src. selection expression = ellipse(30790.729950, 20659.920059, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 17 19:21:45 2011] Writing source region out to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src81_src.reg
[Sat Dec 17 19:21:45 2011] Extracting stamp from image fullrun_mos2_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (317, 201) - (392, 276)
[Sat Dec 17 19:21:45 2011] XMMSAS bgd. selection expression = annulus(30790.729950, 20659.920059, 1087.500000, 2175.000000, X, Y) && !ellipse(28355.619385, 19304.211655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28129.073700, 20566.424530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29308.038000, 20811.464400, 1066.072031, 1066.072031, 0.000000, X, Y) && !ellipse(28385.027200, 18874.946000, 610.303218, 610.303218, 0.000000, X, Y) && !ellipse(28501.932065, 20631.300230, 1599.920046, 1411.999836, 6.683464, X, Y) && !ellipse(29201.557169, 19738.624267, 1490.176043, 746.481061, -0.000000, X, Y) && !ellipse(30055.610748, 19968.926117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30094.902000, 20751.426000, 1990.720057, 1990.720057, 0.000000, X, Y) && !ellipse(30367.831573, 20859.380463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32276.678000, 21066.237400, 1705.848049, 1705.848049, 0.000000, X, Y) && !ellipse(30451.348000, 19936.810800, 1511.624043, 1511.624043, 0.000000, X, Y)
[Sat Dec 17 19:21:45 2011] Writing fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src81.gif
[Sat Dec 17 20:16:35 2011] Mean detx,y = (-3025.02, -7354.03) 
[Sat Dec 17 20:16:36 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 20:16:43 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 20:16:43 2011] Setting source spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Sat Dec 17 20:16:43 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src81_bgd.pi.gz
[Sat Dec 17 22:23:20 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 17 22:23:20 2011] rmf not generated due to insufficient counts
[Sat Dec 17 23:22:09 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:22:09 2011] Error reading totcts from fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src81_src_b10.pi.gz
[Sat Dec 17 23:22:13 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:13 2011] Using photon index=1.80, rate=0.0388, arf fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src81.arf
[Sat Dec 17 23:22:13 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:13 2011] Updating source flux to 6.4e-13
[Sat Dec 17 23:30:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting