[Fri Dec 16 13:06:18 2011] Detection parameters:
  Position = (402.6, 317.1) = 5 34 2.87 22 0 40.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.4 +/- 20.5
  Background counts = 134.6
  Rate = 0.03 +/- 0.005

[Fri Dec 16 13:06:19 2011] Off-axis axis estimate = 7.67'
[Fri Dec 16 16:12:30 2011] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:12:30 2011] Initial guess for spatial extent in simple fitting = 10.27"
[Fri Dec 16 16:12:30 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.100
[Fri Dec 16 16:12:30 2011] Giving source the simple spatial ID 73 for pass 0, mean size = 10.27"
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src73.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src73.csv
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src73_1.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src73.csv
[Fri Dec 16 22:06:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src73_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src73.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:30 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src73.ximg exists
[Fri Dec 16 22:06:30 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src73_1.ximg exists
[Fri Dec 16 22:06:30 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src73 appears to have run properly
[Fri Dec 16 22:06:52 2011] Source 67 is offset by 1.108971 and 2.236871 pixels which is larger than
2 X fitted extent = 1.156823 x 1.156823, not incorporating fit results
[Fri Dec 16 22:06:53 2011] Source 67 is offset by -1.640624 and 8.491055 pixels which is larger than
2 X fitted extent = 3.440906 x 3.440906, not incorporating fit results
[Fri Dec 16 22:06:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:53 2011] Assessing source extent using major
[Fri Dec 16 22:06:53 2011] Source does appear to be extended
[Fri Dec 16 22:06:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:53 2011] Source is confused with source 61
[Sat Dec 17 06:58:27 2011] Using EEF radius (= 10.27 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:58:27 2011] Initial guess for spatial extent in simple fitting = 10.27"
[Sat Dec 17 06:58:27 2011] source mask rpix=2.4, npix_max = 32, mask sum = 36, frac = 1.100
[Sat Dec 17 06:58:27 2011] Giving source the simple spatial ID 64 for pass 1, mean size = 10.27"
[Sat Dec 17 17:06:17 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src64.ximg exists
[Sat Dec 17 17:06:17 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src64_1.ximg exists
[Sat Dec 17 17:06:17 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src64 appears to have run properly
[Sat Dec 17 17:06:19 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src64.ximg exists
[Sat Dec 17 17:06:19 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src64_1.ximg exists
[Sat Dec 17 17:06:19 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src64 appears to have run properly
[Sat Dec 17 17:06:54 2011] Warning, spatial fit 64 centroid is now closest to src. 60
[Sat Dec 17 17:06:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:54 2011] Assessing source extent using major
[Sat Dec 17 17:06:54 2011] Source does appear to be extended
[Sat Dec 17 17:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 19:21:46 2011] XMMSAS src. selection expression = ellipse(34981.364471, 27534.957794, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 17 19:21:46 2011] Writing source region out to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src67_src.reg
[Sat Dec 17 19:21:46 2011] Extracting stamp from image fullrun_mos2_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (365, 280) - (440, 355)
[Sat Dec 17 19:21:46 2011] XMMSAS bgd. selection expression = annulus(34981.364471, 27534.957794, 1087.500000, 2175.000000, X, Y) && !ellipse(33759.689911, 27959.369537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33961.270355, 27360.392273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33543.944885, 29534.027588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34024.223755, 25016.888184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34067.160889, 24581.306732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33887.346000, 30302.224000, 2021.456058, 2021.456058, 0.000000, X, Y) && !ellipse(33930.529000, 28334.230000, 1583.840046, 1583.840046, 0.000000, X, Y) && !ellipse(34507.863892, 29963.053772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33931.903076, 26147.888184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34139.438751, 25522.174774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35020.614000, 29770.576000, 1712.784049, 1712.784049, 0.000000, X, Y) && !ellipse(34177.431400, 30570.968000, 3408.096098, 3408.096098, 0.000000, X, Y) && !ellipse(34779.132000, 28578.478000, 1684.224048, 1684.224048, 0.000000, X, Y) && !ellipse(35374.441559, 28240.300842, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 19:21:46 2011] Writing fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src67.gif
[Sat Dec 17 20:32:06 2011] Mean detx,y = (-7964.70, -1050.88) 
[Sat Dec 17 20:32:06 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 20:32:11 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 20:32:11 2011] Setting source spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Sat Dec 17 20:32:11 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Sat Dec 17 22:46:09 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 17 22:46:09 2011] rmf not generated due to insufficient counts
[Sat Dec 17 23:22:10 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:22:10 2011] Error reading totcts from fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Sat Dec 17 23:22:14 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:14 2011] Using photon index=1.80, rate=0.028, arf fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src67.arf
[Sat Dec 17 23:22:14 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:14 2011] Updating source flux to 4.7e-13
[Sat Dec 17 23:30:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting