[Fri Dec 16 13:06:18 2011] Detection parameters:
  Position = (325.7, 401.1) = 5 34 26.95 22 6 50.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 224.1 +/- 21.1
  Background counts = 137.1
  Rate = 0.07 +/- 0.007

[Fri Dec 16 13:06:19 2011] Off-axis axis estimate = 7.70'
[Fri Dec 16 16:12:30 2011] Using EEF radius (= 10.28 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:12:30 2011] Initial guess for spatial extent in simple fitting = 10.28"
[Fri Dec 16 16:12:30 2011] source mask rpix=2.4, npix_max = 32, mask sum = 24, frac = 0.732
[Fri Dec 16 16:12:30 2011] Giving source the simple spatial ID 17 for pass 0, mean size = 10.28"
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src17.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src17.csv
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src17_1.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src17.csv
[Fri Dec 16 22:06:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Fri Dec 16 22:06:29 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Fri Dec 16 22:06:52 2011] Warning, spatial fit 17 centroid is now closest to src. 41
[Fri Dec 16 22:06:53 2011] Spatial fit model total counts = 1470.960000, observed total counts = 1482.000000
[Fri Dec 16 22:06:53 2011] Offset between fit and detection position for source 43 = 1.213307 pixels
[Fri Dec 16 22:06:53 2011] Warning, changing simple spatial fit ID from 17 to 71
[Fri Dec 16 22:06:53 2011] 1333.483000 total counts/ 551.750000 bgd. counts: snr = 33.280303
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 1.213307 pixels
  Position = (326.9, 401.4) = 5 34 26.57 22 6 47.9
  Extent = 20.8 (20.7-41.7)", rotation angle = 0
  Source counts = 781.7 +/- 36.5
  Background counts = 551.8
  Rate = 0.1 +/- 0.007
[Fri Dec 16 22:06:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:53 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 22:06:53 2011] Source does appear to be extended
[Fri Dec 16 22:06:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:53 2011] Source is confused with source 42
[Sat Dec 17 06:58:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:58:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 17 06:58:27 2011] Initial guess for spatial extent in simple fitting = 20.83"
[Sat Dec 17 06:58:27 2011] source mask rpix=4.8, npix_max = 111, mask sum = 80, frac = 0.715
[Sat Dec 17 06:58:27 2011] Giving source the simple spatial ID 14 for pass 1, mean size = 20.83"
[Sat Dec 17 17:06:16 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src14.ximg exists
[Sat Dec 17 17:06:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src14.csv
[Sat Dec 17 17:06:16 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src14_1.ximg exists
[Sat Dec 17 17:06:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src14.csv
[Sat Dec 17 17:06:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src14.ximg exists
[Sat Dec 17 17:06:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists
[Sat Dec 17 17:06:18 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src14.csv
[Sat Dec 17 17:06:18 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src14_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 17:06:54 2011] Warning, spatial fit 14 centroid is now closest to src. 41
[Sat Dec 17 17:06:54 2011] Spatial fit model total counts = 1467.330000, observed total counts = 1482.000000
[Sat Dec 17 17:06:54 2011] Offset between fit and detection position for source 43 = 2.284944 pixels
[Sat Dec 17 17:06:54 2011] Warning, changing simple spatial fit ID from 14 to 62
[Sat Dec 17 17:06:54 2011] 704.233000 total counts/ 597.406000 bgd. counts: snr = 4.370652
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 2.284944 pixels
  Position = (325.0, 400.0) = 5 34 27.15 22 6 42.1
  Extent = 9.0 (7.5-11.2)", rotation angle = 0
  Source counts = 106.8 +/- 26.5
  Background counts = 597.4
  Rate = 0.02 +/- 0.005
[Sat Dec 17 17:06:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:54 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 17:06:54 2011] Source does appear to be extended
[Sat Dec 17 17:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 19:21:43 2011] XMMSAS src. selection expression = ellipse(28226.620000, 34753.080000, 539.199016, 539.199016, 0.000000, X, Y)
[Sat Dec 17 19:21:43 2011] Writing source region out to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src43_src.reg
[Sat Dec 17 19:21:43 2011] Extracting stamp from image fullrun_mos2_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (294, 369) - (356, 431)
[Sat Dec 17 19:21:43 2011] XMMSAS bgd. selection expression = annulus(28226.620000, 34753.080000, 898.665026, 1797.330052, X, Y) && !ellipse(25719.103607, 35186.518585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26619.518000, 35122.500000, 1048.064030, 1048.064030, 0.000000, X, Y) && !ellipse(26327.888000, 36086.770000, 3293.552095, 3293.552095, 0.000000, X, Y) && !ellipse(29222.560791, 34922.417511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27622.683000, 34643.409000, 1094.368031, 1094.368031, 0.000000, X, Y) && !ellipse(25344.894000, 34261.286000, 1597.824046, 1597.824046, 0.000000, X, Y) && !ellipse(25425.334000, 35690.860000, 1646.776047, 1646.776047, 0.000000, X, Y) && !ellipse(30233.256000, 35019.877400, 1719.960049, 1719.960049, 0.000000, X, Y) && !ellipse(26935.730000, 35263.154000, 729.567221, 729.567221, 0.000000, X, Y) && !ellipse(30776.602539, 35076.520721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27718.160126, 36047.207397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26003.858200, 38773.562000, 2297.408066, 2297.408066, 0.000000, X, Y) && !ellipse(26353.044000, 37521.210000, 1314.104038, 1314.104038, 0.000000, X, Y) && !ellipse(25438.734200, 37697.218000, 1712.784049, 358.064010, 86.423000, X, Y) && !ellipse(28985.031250, 34974.065796, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 19:21:43 2011] Writing fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src43.gif
[Sat Dec 17 19:39:06 2011] Mean detx,y = (-2057.07, 6987.61) 
[Sat Dec 17 19:39:07 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 19:39:16 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 19:39:16 2011] Setting source spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Dec 17 19:39:16 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Sat Dec 17 23:22:06 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:22:06 2011] Error reading totcts from fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Sat Dec 17 23:22:11 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:11 2011] Using photon index=1.80, rate=0.0203, arf fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src43.arf
[Sat Dec 17 23:22:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:12 2011] Updating source flux to 4e-13
[Sat Dec 17 23:30:21 2011] Flag c found in src. 43 procflags, skipping spectral fitting