[Fri Dec 16 13:06:18 2011] Detection parameters:
  Position = (306.2, 406.9) = 5 34 33.04 22 7 13.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 341.3 +/- 28.1
  Background counts = 143.0
  Rate = 0.1 +/- 0.009

[Fri Dec 16 13:06:19 2011] Off-axis axis estimate = 7.89'
[Fri Dec 16 16:12:30 2011] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:12:30 2011] Initial guess for spatial extent in simple fitting = 10.37"
[Fri Dec 16 16:12:30 2011] source mask rpix=2.4, npix_max = 33, mask sum = 35, frac = 1.052
[Fri Dec 16 16:12:30 2011] Giving source the simple spatial ID 7 for pass 0, mean size = 10.37"
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src7.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src7.csv
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src7_1.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src7.csv
[Fri Dec 16 22:06:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src7.ximg exists
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src7_1.ximg exists
[Fri Dec 16 22:06:29 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src7 appears to have run properly
[Fri Dec 16 22:06:52 2011] Spatial fit model total counts = 2563.040000, observed total counts = 2556.000000
[Fri Dec 16 22:06:52 2011] Offset between fit and detection position for source 39 = 2.615077 pixels
[Fri Dec 16 22:06:52 2011] 2544.254000 total counts/ 1646.280000 bgd. counts: snr = 22.131554
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 2.615077 pixels
  Position = (307.0, 404.5) = 5 34 32.78 22 7 1.4
  Extent = 20.7 (20.5-20.7)", rotation angle = 0
  Source counts = 898.0 +/- 50.4
  Background counts = 1646.3
  Rate = 0.2 +/- 0.01
[Fri Dec 16 22:06:52 2011] Spatial fit model total counts = 2675.970000, observed total counts = 2676.000000
[Fri Dec 16 22:06:52 2011] Offset between fit and detection position for source 39 = 0.532574 pixels
[Fri Dec 16 22:06:52 2011] Warning, changing simple spatial fit ID from 7 to 8
[Fri Dec 16 22:06:52 2011] 2685.861000 total counts/ 2540.480000 bgd. counts: snr = 2.884362
Spatial fit parameters:
  Offset between fit and detection position for source 39 = 0.532574 pixels
  Position = (306.5, 404.3) = 5 34 32.94 22 7 0.5
  Extent = 13.1 (7.1-19.6)", rotation angle = 0
  Source counts = 145.4 +/- 51.8
  Background counts = 2540.5
  Rate = 0.03 +/- 0.01
[Fri Dec 16 22:06:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:53 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 22:06:53 2011] Source does appear to be extended
[Fri Dec 16 22:06:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:53 2011] Source is confused with source 35
[Sat Dec 17 06:58:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:58:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 17 06:58:27 2011] Initial guess for spatial extent in simple fitting = 13.10"
[Sat Dec 17 06:58:27 2011] source mask rpix=3.0, npix_max = 49, mask sum = 40, frac = 0.811
[Sat Dec 17 06:58:27 2011] Giving source the simple spatial ID 5 for pass 1, mean size = 13.10"
[Sat Dec 17 17:06:15 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src5.ximg exists
[Sat Dec 17 17:06:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src5.csv
[Sat Dec 17 17:06:15 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src5_1.ximg exists
[Sat Dec 17 17:06:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src5.csv
[Sat Dec 17 17:06:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sat Dec 17 17:06:18 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sat Dec 17 17:06:54 2011] Warning, spatial fit 5 centroid is now closest to src. 29
[Sat Dec 17 17:06:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:54 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 17:06:54 2011] Source does appear to be extended
[Sat Dec 17 17:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 19:21:43 2011] XMMSAS src. selection expression = ellipse(26619.518000, 35122.500000, 786.048023, 786.048023, 0.000000, X, Y)
[Sat Dec 17 19:21:43 2011] Writing source region out to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src39_src.reg
[Sat Dec 17 19:21:43 2011] Extracting stamp from image fullrun_mos2_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (261, 359) - (352, 449)
[Sat Dec 17 19:21:43 2011] XMMSAS bgd. selection expression = annulus(26619.518000, 35122.500000, 1310.080038, 2620.160075, X, Y) && !ellipse(25719.103607, 35186.518585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26327.888000, 36086.770000, 3293.552095, 3293.552095, 0.000000, X, Y) && !ellipse(29222.560791, 34922.417511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25495.764000, 36702.714600, 853.648025, 853.648025, 0.000000, X, Y) && !ellipse(28226.620000, 34753.080000, 718.932021, 718.932021, 0.000000, X, Y) && !ellipse(27622.683000, 34643.409000, 1094.368031, 1094.368031, 0.000000, X, Y) && !ellipse(23175.083740, 34129.076172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25344.894000, 34261.286000, 1597.824046, 1597.824046, 0.000000, X, Y) && !ellipse(25425.334000, 35690.860000, 1646.776047, 1646.776047, 0.000000, X, Y) && !ellipse(24732.806000, 34228.071400, 1588.856046, 1588.856046, 0.000000, X, Y) && !ellipse(26067.695679, 38056.517639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30233.256000, 35019.877400, 1719.960049, 1719.960049, 0.000000, X, Y) && !ellipse(26935.730000, 35263.154000, 729.567221, 729.567221, 0.000000, X, Y) && !ellipse(27718.160126, 36047.207397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26003.858200, 38773.562000, 2297.408066, 2297.408066, 0.000000, X, Y) && !ellipse(26353.044000, 37521.210000, 1314.104038, 1314.104038, 0.000000, X, Y) && !ellipse(25438.734200, 37697.218000, 1712.784049, 358.064010, 86.423000, X, Y) && !ellipse(25533.304657, 38082.351074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25508.222600, 38660.014000, 1941.032056, 1941.032056, 0.000000, X, Y) && !ellipse(28985.031250, 34974.065796, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 19:21:43 2011] Writing fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src39.gif
[Sat Dec 17 19:23:07 2011] Mean detx,y = (-534.36, 7428.00) 
[Sat Dec 17 19:23:08 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 19:23:20 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 19:23:20 2011] Setting source spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat Dec 17 19:23:20 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Sat Dec 17 23:22:06 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:22:06 2011] Error reading totcts from fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Sat Dec 17 23:22:11 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:11 2011] Using photon index=1.80, rate=0.0277, arf fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src39.arf
[Sat Dec 17 23:22:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:11 2011] Updating source flux to 5e-13
[Sat Dec 17 23:30:21 2011] Flag c found in src. 39 procflags, skipping spectral fitting
[Sat Dec 17 23:40:37 2011] Reading fit data from xmm0412592501/analysis//spectral/fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src39_pl.csv
[Sat Dec 17 23:40:37 2011] Spectral fit parameter nH value = 1.80016e+21
[Sat Dec 17 23:40:37 2011] Spectral fit parameter PhoIndex value = 1.9149
[Sat Dec 17 23:40:37 2011] Failed to get F(0.3-8.0) from xmm0412592501/analysis//spectral/fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src39_pl.csv, possibly due to different flux energy range selected
[Sat Dec 17 23:40:37 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:40:37 2011] Using Nh = 1.8e+21, photon index=1.91, rate=0.0277, arf fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src39.arf
[Sat Dec 17 23:40:37 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:40:37 2011] Updating source flux to 5.2e-13