[Fri Dec 16 13:06:18 2011] Detection parameters:
  Position = (296.2, 405.0) = 5 34 36.18 22 7 2.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 341.3 +/- 25.1
  Background counts = 133.5
  Rate = 0.1 +/- 0.008

[Fri Dec 16 13:06:19 2011] Off-axis axis estimate = 7.73'
[Fri Dec 16 16:12:30 2011] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:12:30 2011] Initial guess for spatial extent in simple fitting = 10.29"
[Fri Dec 16 16:12:30 2011] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.883
[Fri Dec 16 16:12:30 2011] Giving source the simple spatial ID 6 for pass 0, mean size = 10.29"
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src6.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src6.csv
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src6_1.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src6.csv
[Fri Dec 16 22:06:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src6_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src6.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src6.ximg exists
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src6_1.ximg exists
[Fri Dec 16 22:06:29 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src6 appears to have run properly
[Fri Dec 16 22:06:52 2011] Warning, spatial fit 6 centroid is now closest to src. 34
[Fri Dec 16 22:06:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:53 2011] Assessing source extent using major
[Fri Dec 16 22:06:53 2011] Source does appear to be extended
[Fri Dec 16 22:06:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:53 2011] Source is confused with source 44
[Fri Dec 16 22:06:53 2011] Source is confused with source 34
[Sat Dec 17 06:58:27 2011] Using EEF radius (= 10.29 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:58:27 2011] Initial guess for spatial extent in simple fitting = 10.29"
[Sat Dec 17 06:58:27 2011] source mask rpix=2.4, npix_max = 32, mask sum = 29, frac = 0.883
[Sat Dec 17 06:58:27 2011] Giving source the simple spatial ID 4 for pass 1, mean size = 10.29"
[Sat Dec 17 17:06:15 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src4.ximg exists
[Sat Dec 17 17:06:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src4.csv
[Sat Dec 17 17:06:15 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Dec 17 17:06:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src4.csv
[Sat Dec 17 17:06:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 17:06:17 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Dec 17 17:06:18 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src4 appears to have run properly
[Sat Dec 17 17:06:54 2011] Warning, spatial fit 4 centroid is now closest to src. 6
[Sat Dec 17 17:06:54 2011] Warning: source 15 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 14.163032 pixels away
[Sat Dec 17 17:06:54 2011] Warning: source 19 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 19.500504 pixels away
[Sat Dec 17 17:06:54 2011] Warning: source 22 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 36 at 29.061399 pixels away
[Sat Dec 17 17:06:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:54 2011] Assessing source extent using major
[Sat Dec 17 17:06:54 2011] Source does appear to be extended
[Sat Dec 17 17:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 19:21:43 2011] XMMSAS src. selection expression = ellipse(25719.103607, 35186.518585, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 17 19:21:43 2011] Writing source region out to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src36_src.reg
[Sat Dec 17 19:21:43 2011] Extracting stamp from image fullrun_mos2_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (259, 368) - (334, 443)
[Sat Dec 17 19:21:43 2011] XMMSAS bgd. selection expression = annulus(25719.103607, 35186.518585, 1087.500000, 2175.000000, X, Y) && !ellipse(26619.518000, 35122.500000, 1048.064030, 1048.064030, 0.000000, X, Y) && !ellipse(26327.888000, 36086.770000, 3293.552095, 3293.552095, 0.000000, X, Y) && !ellipse(25495.764000, 36702.714600, 853.648025, 853.648025, 0.000000, X, Y) && !ellipse(28226.620000, 34753.080000, 718.932021, 718.932021, 0.000000, X, Y) && !ellipse(27622.683000, 34643.409000, 1094.368031, 1094.368031, 0.000000, X, Y) && !ellipse(23175.083740, 34129.076172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25344.894000, 34261.286000, 1597.824046, 1597.824046, 0.000000, X, Y) && !ellipse(25425.334000, 35690.860000, 1646.776047, 1646.776047, 0.000000, X, Y) && !ellipse(24732.806000, 34228.071400, 1588.856046, 1588.856046, 0.000000, X, Y) && !ellipse(26067.695679, 38056.517639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26935.730000, 35263.154000, 729.567221, 729.567221, 0.000000, X, Y) && !ellipse(27718.160126, 36047.207397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26003.858200, 38773.562000, 2297.408066, 2297.408066, 0.000000, X, Y) && !ellipse(26353.044000, 37521.210000, 1314.104038, 1314.104038, 0.000000, X, Y) && !ellipse(25438.734200, 37697.218000, 1712.784049, 358.064010, 86.423000, X, Y) && !ellipse(25533.304657, 38082.351074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25508.222600, 38660.014000, 1941.032056, 1941.032056, 0.000000, X, Y)
[Sat Dec 17 19:21:43 2011] Writing fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src36.gif
[Sat Dec 17 19:22:50 2011] Mean detx,y = (330.03, 7610.43) 
[Sat Dec 17 19:22:51 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 19:23:03 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 19:23:03 2011] Setting source spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat Dec 17 19:23:03 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Sat Dec 17 20:45:04 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 17 20:45:04 2011] rmf not generated due to insufficient counts
[Sat Dec 17 23:22:06 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:22:06 2011] Error reading totcts from fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Sat Dec 17 23:22:11 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:11 2011] Using photon index=1.80, rate=0.109, arf fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src36.arf
[Sat Dec 17 23:22:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:11 2011] Updating source flux to 2.5e-12
[Sat Dec 17 23:30:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Dec 17 23:40:37 2011] xmm0412592501/analysis//spectral/fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete