[Fri Dec 16 13:06:18 2011] Detection parameters:
  Position = (295.3, 410.2) = 5 34 36.45 22 7 23.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 184.3 +/- 22.2
  Background counts = 137.2
  Rate = 0.06 +/- 0.007

[Fri Dec 16 13:06:19 2011] Off-axis axis estimate = 8.11'
[Fri Dec 16 16:12:30 2011] Using EEF radius (= 10.48 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:12:30 2011] Initial guess for spatial extent in simple fitting = 10.48"
[Fri Dec 16 16:12:30 2011] source mask rpix=2.4, npix_max = 33, mask sum = 33, frac = 0.974
[Fri Dec 16 16:12:30 2011] Giving source the simple spatial ID 25 for pass 0, mean size = 10.48"
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src25.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src25.csv
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src25_1.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src25.csv
[Fri Dec 16 22:06:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Fri Dec 16 22:06:29 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src25 appears to have run properly
[Fri Dec 16 22:06:52 2011] Spatial fit model total counts = 2226.310000, observed total counts = 2223.000000
[Fri Dec 16 22:06:52 2011] Offset between fit and detection position for source 34 = 2.565689 pixels
[Fri Dec 16 22:06:52 2011] Warning, changing simple spatial fit ID from 25 to 6
[Fri Dec 16 22:06:52 2011] 2063.837000 total counts/ 1503.230000 bgd. counts: snr = 14.459251
Spatial fit parameters:
  Offset between fit and detection position for source 34 = 2.565689 pixels
  Position = (292.8, 410.8) = 5 34 37.23 22 7 29.0
  Extent = 20.6 (20.3-41.2)", rotation angle = 0
  Source counts = 560.6 +/- 45.4
  Background counts = 1503.2
  Rate = 0.1 +/- 0.009
[Fri Dec 16 22:06:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:53 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 22:06:53 2011] Source does appear to be extended
[Fri Dec 16 22:06:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:53 2011] Source is confused with source 36
[Sat Dec 17 06:58:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:58:27 2011] Initial guess for spatial extent in simple fitting = 20.58"
[Sat Dec 17 06:58:27 2011] source mask rpix=4.7, npix_max = 109, mask sum = 90, frac = 0.822
[Sat Dec 17 06:58:27 2011] Giving source the simple spatial ID 21 for pass 1, mean size = 20.58"
[Sat Dec 17 17:06:16 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src21.ximg exists
[Sat Dec 17 17:06:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src21.csv
[Sat Dec 17 17:06:16 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src21_1.ximg exists
[Sat Dec 17 17:06:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src21.csv
[Sat Dec 17 17:06:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Sat Dec 17 17:06:18 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Sat Dec 17 17:06:54 2011] Warning, spatial fit 21 centroid is now closest to src. 31
[Sat Dec 17 17:06:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:54 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 17:06:54 2011] Source does appear to be extended
[Sat Dec 17 17:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 19:21:44 2011] XMMSAS src. selection expression = ellipse(25425.334000, 35690.860000, 1235.082036, 1235.082036, 0.000000, X, Y)
[Sat Dec 17 19:21:44 2011] Writing source region out to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src34_src.reg
[Sat Dec 17 19:21:44 2011] Extracting stamp from image fullrun_mos2_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (222, 340) - (364, 482)
[Sat Dec 17 19:21:44 2011] XMMSAS bgd. selection expression = annulus(25425.334000, 35690.860000, 2058.470059, 4116.940118, X, Y) && !ellipse(25719.103607, 35186.518585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26619.518000, 35122.500000, 1048.064030, 1048.064030, 0.000000, X, Y) && !ellipse(26327.888000, 36086.770000, 3293.552095, 3293.552095, 0.000000, X, Y) && !ellipse(29222.560791, 34922.417511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25495.764000, 36702.714600, 853.648025, 853.648025, 0.000000, X, Y) && !ellipse(28226.620000, 34753.080000, 718.932021, 718.932021, 0.000000, X, Y) && !ellipse(27622.683000, 34643.409000, 1094.368031, 1094.368031, 0.000000, X, Y) && !ellipse(23175.083740, 34129.076172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25344.894000, 34261.286000, 1597.824046, 1597.824046, 0.000000, X, Y) && !ellipse(24732.806000, 34228.071400, 1588.856046, 1588.856046, 0.000000, X, Y) && !ellipse(26067.695679, 38056.517639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30233.256000, 35019.877400, 1719.960049, 1719.960049, 0.000000, X, Y) && !ellipse(26935.730000, 35263.154000, 729.567221, 729.567221, 0.000000, X, Y) && !ellipse(25631.876800, 40642.441800, 1984.672057, 1984.672057, 0.000000, X, Y) && !ellipse(27718.160126, 36047.207397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26003.858200, 38773.562000, 2297.408066, 2297.408066, 0.000000, X, Y) && !ellipse(26353.044000, 37521.210000, 1314.104038, 1314.104038, 0.000000, X, Y) && !ellipse(26032.818800, 39455.002000, 1148.704033, 1148.704033, 0.000000, X, Y) && !ellipse(25092.305200, 40221.163560, 473.687214, 473.687214, 0.000000, X, Y) && !ellipse(25438.734200, 37697.218000, 1712.784049, 358.064010, 86.423000, X, Y) && !ellipse(25533.304657, 38082.351074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25508.222600, 38660.014000, 1941.032056, 1941.032056, 0.000000, X, Y) && !ellipse(28985.031250, 34974.065796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25379.509430, 39591.955597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.588000, 39068.234000, 1267.816036, 1267.816036, 0.000000, X, Y)
[Sat Dec 17 19:21:44 2011] Writing fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src34.gif
[Sat Dec 17 19:45:08 2011] Mean detx,y = (445.99, 8130.79) 
[Sat Dec 17 19:45:09 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 19:45:28 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 19:45:28 2011] Setting source spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat Dec 17 19:45:28 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src34_bgd.pi.gz
[Sat Dec 17 23:22:07 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:22:07 2011] Error reading totcts from fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src34_src_b10.pi.gz
[Sat Dec 17 23:22:12 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:12 2011] Using photon index=1.80, rate=0.107, arf fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src34.arf
[Sat Dec 17 23:22:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:12 2011] Updating source flux to 2e-12
[Sat Dec 17 23:30:21 2011] Flag c found in src. 34 procflags, skipping spectral fitting