[Fri Dec 16 13:06:18 2011] Detection parameters:
  Position = (302.2, 413.3) = 5 34 34.29 22 7 34.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 310.2 +/- 25.7
  Background counts = 137.3
  Rate = 0.1 +/- 0.009

[Fri Dec 16 13:06:19 2011] Off-axis axis estimate = 8.33'
[Fri Dec 16 16:12:30 2011] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:12:30 2011] Initial guess for spatial extent in simple fitting = 10.60"
[Fri Dec 16 16:12:30 2011] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.841
[Fri Dec 16 16:12:30 2011] Giving source the simple spatial ID 8 for pass 0, mean size = 10.60"
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src8.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src8.csv
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src8_1.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src8.csv
[Fri Dec 16 22:06:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src8_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src8.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src8.ximg exists
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src8_1.ximg exists
[Fri Dec 16 22:06:29 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src8 appears to have run properly
[Fri Dec 16 22:06:52 2011] Warning, spatial fit 8 centroid is now closest to src. 39
[Fri Dec 16 22:06:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:53 2011] Assessing source extent using major
[Fri Dec 16 22:06:53 2011] Source does appear to be extended
[Fri Dec 16 22:06:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:53 2011] Source is confused with source 34
[Sat Dec 17 06:58:27 2011] Using EEF radius (= 10.60 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:58:27 2011] Initial guess for spatial extent in simple fitting = 10.60"
[Sat Dec 17 06:58:27 2011] source mask rpix=2.4, npix_max = 34, mask sum = 29, frac = 0.841
[Sat Dec 17 06:58:27 2011] Giving source the simple spatial ID 6 for pass 1, mean size = 10.60"
[Sat Dec 17 17:06:15 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src6.ximg exists
[Sat Dec 17 17:06:15 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src6_1.ximg exists
[Sat Dec 17 17:06:15 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src6 appears to have run properly
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src6.ximg exists
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src6_1.ximg exists
[Sat Dec 17 17:06:18 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src6 appears to have run properly
[Sat Dec 17 17:06:54 2011] Spatial fit model total counts = 3331.940000, observed total counts = 3330.000000
[Sat Dec 17 17:06:54 2011] Offset between fit and detection position for source 31 = 3.661341 pixels
[Sat Dec 17 17:06:54 2011] 3178.032000 total counts/ 2940.280000 bgd. counts: snr = 4.384599
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 3.661341 pixels
  Position = (302.8, 416.9) = 5 34 34.10 22 7 55.6
  Extent = 10.7 (7.7-15.1)", rotation angle = 0
  Source counts = 237.8 +/- 56.4
  Background counts = 2940.3
  Rate = 0.05 +/- 0.01
[Sat Dec 17 17:06:54 2011] Spatial fit model total counts = 11108.700000, observed total counts = 11115.000000
[Sat Dec 17 17:06:54 2011] Offset between fit and detection position for source 31 = 1.617461 pixels
[Sat Dec 17 17:06:54 2011] Warning, changing simple spatial fit ID from 6 to 21
[Sat Dec 17 17:06:54 2011] 10912.080000 total counts/ 8535.670000 bgd. counts: snr = 25.721871
Spatial fit parameters:
  Offset between fit and detection position for source 31 = 1.617461 pixels
  Position = (303.2, 415.3) = 5 34 33.99 22 7 48.8
  Extent = 41.2 (41.1-82.3)", rotation angle = 0
  Source counts = 2376.4 +/- 104.5
  Background counts = 8535.7
  Rate = 0.5 +/- 0.02
[Sat Dec 17 17:06:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:54 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 17:06:54 2011] Source does appear to be extended
[Sat Dec 17 17:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 19:21:43 2011] Counts = 2376.410000, rescaling region sizes by 2.000000
[Sat Dec 17 19:21:43 2011] XMMSAS src. selection expression = ellipse(26327.888000, 36086.770000, 4940.328142, 4940.328142, 0.000000, X, Y)
[Sat Dec 17 19:21:43 2011] Writing source region out to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src31_src.reg
[Sat Dec 17 19:21:43 2011] Extracting stamp from image fullrun_mos2_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (19, 131) - (587, 595)
[Sat Dec 17 19:21:43 2011] XMMSAS bgd. selection expression = annulus(26327.888000, 36086.770000, 16467.760474, 32935.520948, X, Y) && !ellipse(34744.870392, 30885.750793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35740.655060, 32427.571442, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25719.103607, 35186.518585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26619.518000, 35122.500000, 1048.064030, 1048.064030, 0.000000, X, Y) && !ellipse(28355.619385, 19304.211655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28129.073700, 20566.424530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19747.525000, 27819.546000, 1474.512042, 1474.512042, 0.000000, X, Y) && !ellipse(29222.560791, 34922.417511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27158.069000, 20469.674000, 1400.904040, 1400.904040, 0.000000, X, Y) && !ellipse(33759.689911, 27959.369537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25495.764000, 36702.714600, 853.648025, 853.648025, 0.000000, X, Y) && !ellipse(28226.620000, 34753.080000, 718.932021, 718.932021, 0.000000, X, Y) && !ellipse(27622.683000, 34643.409000, 1094.368031, 1094.368031, 0.000000, X, Y) && !ellipse(33961.270355, 27360.392273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23175.083740, 34129.076172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29308.038000, 20811.464400, 1066.072031, 1066.072031, 0.000000, X, Y) && !ellipse(25344.894000, 34261.286000, 1597.824046, 1597.824046, 0.000000, X, Y) && !ellipse(27506.120000, 20039.348000, 523.063215, 523.063215, 0.000000, X, Y) && !ellipse(25425.334000, 35690.860000, 1646.776047, 1646.776047, 0.000000, X, Y) && !ellipse(24732.806000, 34228.071400, 1588.856046, 1588.856046, 0.000000, X, Y) && !ellipse(33543.944885, 29534.027588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34024.223755, 25016.888184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25486.406000, 42841.470000, 668.395219, 668.395219, 0.000000, X, Y) && !ellipse(26067.695679, 38056.517639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30233.256000, 35019.877400, 1719.960049, 1719.960049, 0.000000, X, Y) && !ellipse(26935.730000, 35263.154000, 729.567221, 729.567221, 0.000000, X, Y) && !ellipse(25631.876800, 40642.441800, 1984.672057, 1984.672057, 0.000000, X, Y) && !ellipse(25692.648895, 41104.379761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34067.160889, 24581.306732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30776.602539, 35076.520721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27718.160126, 36047.207397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33887.346000, 30302.224000, 2021.456058, 2021.456058, 0.000000, X, Y) && !ellipse(26003.858200, 38773.562000, 2297.408066, 2297.408066, 0.000000, X, Y) && !ellipse(33930.529000, 28334.230000, 1583.840046, 1583.840046, 0.000000, X, Y) && !ellipse(28385.027200, 18874.946000, 610.303218, 610.303218, 0.000000, X, Y) && !ellipse(26353.044000, 37521.210000, 1314.104038, 1314.104038, 0.000000, X, Y) && !ellipse(28501.932065, 20631.300230, 1599.920046, 1411.999836, 6.683464, X, Y) && !ellipse(33322.557922, 32232.790527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25983.240000, 20385.549240, 1401.096040, 1401.096040, 0.000000, X, Y) && !ellipse(33510.528000, 31529.019600, 1327.376038, 1327.376038, 0.000000, X, Y) && !ellipse(34507.863892, 29963.053772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26032.818800, 39455.002000, 1148.704033, 1148.704033, 0.000000, X, Y) && !ellipse(33931.903076, 26147.888184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29201.557169, 19738.624267, 1490.176043, 746.481061, -0.000000, X, Y) && !ellipse(25092.305200, 40221.163560, 473.687214, 473.687214, 0.000000, X, Y) && !ellipse(25508.910248, 43535.114838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34139.438751, 25522.174774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34395.349060, 24138.272614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30790.729950, 20659.920059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30055.610748, 19968.926117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30094.902000, 20751.426000, 1990.720057, 1990.720057, 0.000000, X, Y) && !ellipse(34085.018616, 32385.879517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19407.971527, 28581.360596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30367.831573, 20859.380463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.734200, 37697.218000, 1712.784049, 358.064010, 86.423000, X, Y) && !ellipse(20082.063553, 29087.918945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35020.614000, 29770.576000, 1712.784049, 1712.784049, 0.000000, X, Y) && !ellipse(25533.304657, 38082.351074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25216.307434, 44143.467010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34436.154205, 23643.051239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25508.222600, 38660.014000, 1941.032056, 1941.032056, 0.000000, X, Y) && !ellipse(28985.031250, 34974.065796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34177.431400, 30570.968000, 3408.096098, 3408.096098, 0.000000, X, Y) && !ellipse(34981.364471, 27534.957794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25379.509430, 39591.955597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32276.678000, 21066.237400, 1705.848049, 1705.848049, 0.000000, X, Y) && !ellipse(25111.588000, 39068.234000, 1267.816036, 1267.816036, 0.000000, X, Y) && !ellipse(20286.900391, 25339.816742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33803.200531, 32842.356049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34260.290000, 31775.526000, 1047.416030, 1047.416030, 0.000000, X, Y) && !ellipse(25087.920837, 41789.377319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30451.348000, 19936.810800, 1511.624043, 1511.624043, 0.000000, X, Y) && !ellipse(19760.442800, 26951.398000, 2743.728079, 2743.728079, 0.000000, X, Y) && !ellipse(34779.132000, 28578.478000, 1684.224048, 1684.224048, 0.000000, X, Y) && !ellipse(35374.441559, 28240.300842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25038.088593, 43003.516907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24931.008606, 43435.192810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25147.032410, 40841.452209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33084.253113, 32774.700592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24292.784000, 43739.506000, 1887.808054, 1193.416034, 0.242000, X, Y) && !ellipse(19698.871140, 30743.619110, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28636.431213, 14484.343155, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 19:21:43 2011] Writing fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src31.gif
[Sat Dec 17 19:23:29 2011] Mean detx,y = (-376.11, 9121.66) 
[Sat Dec 17 19:23:31 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 19:30:28 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 19:30:28 2011] Setting source spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Dec 17 19:30:28 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src31_bgd.pi.gz
[Sat Dec 17 23:22:06 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:22:06 2011] Error reading totcts from fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src31_src_b10.pi.gz
[Sat Dec 17 23:22:11 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:11 2011] Using photon index=1.80, rate=0.452, arf fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src31.arf
[Sat Dec 17 23:22:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:11 2011] Updating source flux to 7.3e-12
[Sat Dec 17 23:30:21 2011] Flag c found in src. 31 procflags, skipping spectral fitting