[Fri Dec 16 13:06:18 2011] Detection parameters:
  Position = (319.2, 414.9) = 5 34 28.98 22 7 38.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 148.0 +/- 20.0
  Background counts = 120.6
  Rate = 0.05 +/- 0.007

[Fri Dec 16 13:06:19 2011] Off-axis axis estimate = 8.58'
[Fri Dec 16 16:12:30 2011] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:12:30 2011] Initial guess for spatial extent in simple fitting = 10.72"
[Fri Dec 16 16:12:30 2011] source mask rpix=2.5, npix_max = 35, mask sum = 32, frac = 0.911
[Fri Dec 16 16:12:30 2011] Giving source the simple spatial ID 35 for pass 0, mean size = 10.72"
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src35.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src35.csv
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src35_1.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src35.csv
[Fri Dec 16 22:06:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src35_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src35.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src35.ximg exists
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src35_1.ximg exists
[Fri Dec 16 22:06:29 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src35 appears to have run properly
[Fri Dec 16 22:06:52 2011] Source 29 is offset by -7.255470 and 2.305671 pixels which is larger than
2 X fitted extent = 1.198441 x 1.198441, not incorporating fit results
[Fri Dec 16 22:06:52 2011] Warning: source 35 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 29 at 14.634840 pixels away
[Fri Dec 16 22:06:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:53 2011] Assessing source extent using major
[Fri Dec 16 22:06:53 2011] Source does appear to be extended
[Fri Dec 16 22:06:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 06:58:27 2011] Using EEF radius (= 10.72 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:58:27 2011] Initial guess for spatial extent in simple fitting = 10.72"
[Sat Dec 17 06:58:27 2011] source mask rpix=2.5, npix_max = 35, mask sum = 32, frac = 0.911
[Sat Dec 17 06:58:27 2011] Giving source the simple spatial ID 31 for pass 1, mean size = 10.72"
[Sat Dec 17 17:06:16 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src31.ximg exists
[Sat Dec 17 17:06:16 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src31_1.ximg exists
[Sat Dec 17 17:06:16 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src31 appears to have run properly
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src31.ximg exists
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src31_1.ximg exists
[Sat Dec 17 17:06:18 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src31 appears to have run properly
[Sat Dec 17 17:06:54 2011] Source 29 is offset by 1.110300 and -2.153524 pixels which is larger than
2 X fitted extent = 1.505839 x 1.505839, not incorporating fit results
[Sat Dec 17 17:06:54 2011] Source 29 is offset by -7.255470 and 2.305671 pixels which is larger than
2 X fitted extent = 1.198441 x 1.198441, not incorporating fit results
[Sat Dec 17 17:06:54 2011] Source 29 is offset by 7.768990 and -5.749570 pixels which is larger than
2 X fitted extent = 1.235154 x 1.235154, not incorporating fit results
[Sat Dec 17 17:06:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:54 2011] Assessing source extent using major
[Sat Dec 17 17:06:54 2011] Source does appear to be extended
[Sat Dec 17 17:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 17:06:54 2011] Source is confused with source 31
[Sat Dec 17 19:21:44 2011] XMMSAS src. selection expression = ellipse(27718.160126, 36047.207397, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 17 19:21:44 2011] Writing source region out to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src29_src.reg
[Sat Dec 17 19:21:44 2011] Extracting stamp from image fullrun_mos2_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (282, 377) - (357, 452)
[Sat Dec 17 19:21:44 2011] XMMSAS bgd. selection expression = annulus(27718.160126, 36047.207397, 1087.500000, 2175.000000, X, Y) && !ellipse(25719.103607, 35186.518585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26619.518000, 35122.500000, 1048.064030, 1048.064030, 0.000000, X, Y) && !ellipse(26327.888000, 36086.770000, 3293.552095, 3293.552095, 0.000000, X, Y) && !ellipse(29222.560791, 34922.417511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25495.764000, 36702.714600, 853.648025, 853.648025, 0.000000, X, Y) && !ellipse(28226.620000, 34753.080000, 718.932021, 718.932021, 0.000000, X, Y) && !ellipse(27622.683000, 34643.409000, 1094.368031, 1094.368031, 0.000000, X, Y) && !ellipse(25344.894000, 34261.286000, 1597.824046, 1597.824046, 0.000000, X, Y) && !ellipse(25425.334000, 35690.860000, 1646.776047, 1646.776047, 0.000000, X, Y) && !ellipse(24732.806000, 34228.071400, 1588.856046, 1588.856046, 0.000000, X, Y) && !ellipse(26067.695679, 38056.517639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30233.256000, 35019.877400, 1719.960049, 1719.960049, 0.000000, X, Y) && !ellipse(26935.730000, 35263.154000, 729.567221, 729.567221, 0.000000, X, Y) && !ellipse(26003.858200, 38773.562000, 2297.408066, 2297.408066, 0.000000, X, Y) && !ellipse(26353.044000, 37521.210000, 1314.104038, 1314.104038, 0.000000, X, Y) && !ellipse(25438.734200, 37697.218000, 1712.784049, 358.064010, 86.423000, X, Y) && !ellipse(25533.304657, 38082.351074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25508.222600, 38660.014000, 1941.032056, 1941.032056, 0.000000, X, Y) && !ellipse(28985.031250, 34974.065796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.588000, 39068.234000, 1267.816036, 1267.816036, 0.000000, X, Y)
[Sat Dec 17 19:21:44 2011] Writing fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src29.gif
[Sat Dec 17 19:53:54 2011] Mean detx,y = (-1712.24, 8228.26) 
[Sat Dec 17 19:53:54 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 19:54:03 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 19:54:03 2011] Setting source spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Dec 17 19:54:03 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src29_bgd.pi.gz
[Sat Dec 17 21:44:01 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 17 21:44:01 2011] rmf not generated due to insufficient counts
[Sat Dec 17 23:22:08 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:22:08 2011] Error reading totcts from fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src29_src_b10.pi.gz
[Sat Dec 17 23:22:12 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:12 2011] Using photon index=1.80, rate=0.0547, arf fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src29.arf
[Sat Dec 17 23:22:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:12 2011] Updating source flux to 1.1e-12
[Sat Dec 17 23:30:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting