[Fri Dec 16 13:06:18 2011] Detection parameters:
  Position = (296.4, 422.1) = 5 34 36.11 22 8 16.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 201.8 +/- 22.6
  Background counts = 127.5
  Rate = 0.07 +/- 0.008

[Fri Dec 16 13:06:19 2011] Off-axis axis estimate = 8.96'
[Fri Dec 16 16:12:30 2011] Using EEF radius (= 10.91 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:12:30 2011] Initial guess for spatial extent in simple fitting = 10.91"
[Fri Dec 16 16:12:30 2011] source mask rpix=2.5, npix_max = 36, mask sum = 31, frac = 0.856
[Fri Dec 16 16:12:30 2011] Giving source the simple spatial ID 16 for pass 0, mean size = 10.91"
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src16.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src16.csv
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src16_1.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src16.csv
[Fri Dec 16 22:06:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Fri Dec 16 22:06:29 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Fri Dec 16 22:06:52 2011] Spatial fit model total counts = 2227.970000, observed total counts = 2228.000000
[Fri Dec 16 22:06:52 2011] Offset between fit and detection position for source 28 = 2.809420 pixels
[Fri Dec 16 22:06:52 2011] 1928.701000 total counts/ 1748.680000 bgd. counts: snr = 4.304949
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 2.809420 pixels
  Position = (293.6, 422.4) = 5 34 36.98 22 8 19.6
  Extent = 10.7 (7.3-15.5)", rotation angle = 0
  Source counts = 180.0 +/- 43.9
  Background counts = 1748.7
  Rate = 0.03 +/- 0.008
[Fri Dec 16 22:06:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:53 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 22:06:53 2011] Source does appear to be extended
[Fri Dec 16 22:06:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:53 2011] Source is confused with source 34
[Sat Dec 17 06:58:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:58:27 2011] Initial guess for spatial extent in simple fitting = 10.67"
[Sat Dec 17 06:58:27 2011] source mask rpix=2.5, npix_max = 34, mask sum = 36, frac = 1.032
[Sat Dec 17 06:58:27 2011] Giving source the simple spatial ID 13 for pass 1, mean size = 10.67"
[Sat Dec 17 17:06:16 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src13.ximg exists
[Sat Dec 17 17:06:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src13.csv
[Sat Dec 17 17:06:16 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src13_1.ximg exists
[Sat Dec 17 17:06:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src13.csv
[Sat Dec 17 17:06:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Sat Dec 17 17:06:18 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Sat Dec 17 17:06:54 2011] Warning, spatial fit 13 centroid is now closest to src. 25
[Sat Dec 17 17:06:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:54 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 17:06:54 2011] Source does appear to be extended
[Sat Dec 17 17:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 19:21:43 2011] XMMSAS src. selection expression = ellipse(25495.764000, 36702.714600, 640.236018, 640.236018, 0.000000, X, Y)
[Sat Dec 17 19:21:43 2011] Writing source region out to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src28_src.reg
[Sat Dec 17 19:21:43 2011] Extracting stamp from image fullrun_mos2_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (257, 386) - (330, 459)
[Sat Dec 17 19:21:43 2011] XMMSAS bgd. selection expression = annulus(25495.764000, 36702.714600, 1067.060031, 2134.120061, X, Y) && !ellipse(25719.103607, 35186.518585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26619.518000, 35122.500000, 1048.064030, 1048.064030, 0.000000, X, Y) && !ellipse(26327.888000, 36086.770000, 3293.552095, 3293.552095, 0.000000, X, Y) && !ellipse(28226.620000, 34753.080000, 718.932021, 718.932021, 0.000000, X, Y) && !ellipse(27622.683000, 34643.409000, 1094.368031, 1094.368031, 0.000000, X, Y) && !ellipse(23175.083740, 34129.076172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25344.894000, 34261.286000, 1597.824046, 1597.824046, 0.000000, X, Y) && !ellipse(25425.334000, 35690.860000, 1646.776047, 1646.776047, 0.000000, X, Y) && !ellipse(24732.806000, 34228.071400, 1588.856046, 1588.856046, 0.000000, X, Y) && !ellipse(26067.695679, 38056.517639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26935.730000, 35263.154000, 729.567221, 729.567221, 0.000000, X, Y) && !ellipse(25631.876800, 40642.441800, 1984.672057, 1984.672057, 0.000000, X, Y) && !ellipse(27718.160126, 36047.207397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26003.858200, 38773.562000, 2297.408066, 2297.408066, 0.000000, X, Y) && !ellipse(26353.044000, 37521.210000, 1314.104038, 1314.104038, 0.000000, X, Y) && !ellipse(26032.818800, 39455.002000, 1148.704033, 1148.704033, 0.000000, X, Y) && !ellipse(25438.734200, 37697.218000, 1712.784049, 358.064010, 86.423000, X, Y) && !ellipse(25533.304657, 38082.351074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25508.222600, 38660.014000, 1941.032056, 1941.032056, 0.000000, X, Y) && !ellipse(25379.509430, 39591.955597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.588000, 39068.234000, 1267.816036, 1267.816036, 0.000000, X, Y)
[Sat Dec 17 19:21:43 2011] Writing fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src28.gif
[Sat Dec 17 19:38:48 2011] Mean detx,y = (362.29, 9099.91) 
[Sat Dec 17 19:38:48 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 19:39:03 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 19:39:03 2011] Setting source spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Dec 17 19:39:03 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Sat Dec 17 23:22:06 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:22:06 2011] Error reading totcts from fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Sat Dec 17 23:22:11 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:11 2011] Using photon index=1.80, rate=0.0343, arf fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src28.arf
[Sat Dec 17 23:22:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:11 2011] Updating source flux to 1.1e-12
[Sat Dec 17 23:30:21 2011] Flag c found in src. 28 procflags, skipping spectral fitting