[Fri Dec 16 13:06:18 2011] Detection parameters:
  Position = (300.2, 438.0) = 5 34 34.92 22 9 26.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 313.3 +/- 26.7
  Background counts = 97.6
  Rate = 0.06 +/- 0.005

[Fri Dec 16 13:06:19 2011] Off-axis axis estimate = 10.12'
[Fri Dec 16 16:12:30 2011] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:12:30 2011] Initial guess for spatial extent in simple fitting = 11.49"
[Fri Dec 16 16:12:30 2011] source mask rpix=2.6, npix_max = 39, mask sum = 35, frac = 0.887
[Fri Dec 16 16:12:30 2011] Giving source the simple spatial ID 29 for pass 0, mean size = 11.49"
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src29.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src29.csv
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src29_1.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src29.csv
[Fri Dec 16 22:06:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src29_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src29.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src29.ximg exists
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src29_1.ximg exists
[Fri Dec 16 22:06:29 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src29 appears to have run properly
[Fri Dec 16 22:06:52 2011] Warning, spatial fit 29 centroid is now closest to src. 19
[Fri Dec 16 22:06:52 2011] Source 25 is offset by -8.244647 and -0.580487 pixels which is larger than
2 X fitted extent = 1.366349 x 1.366349, not incorporating fit results
[Fri Dec 16 22:06:53 2011] Source 25 is offset by -4.372532 and -3.980349 pixels which is larger than
2 X fitted extent = 1.397779 x 1.397779, not incorporating fit results
[Fri Dec 16 22:06:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:53 2011] Assessing source extent using major
[Fri Dec 16 22:06:53 2011] Source does appear to be extended
[Fri Dec 16 22:06:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:53 2011] Source is confused with source 24
[Sat Dec 17 06:58:27 2011] Using EEF radius (= 11.49 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:58:27 2011] Initial guess for spatial extent in simple fitting = 11.49"
[Sat Dec 17 06:58:27 2011] source mask rpix=2.6, npix_max = 39, mask sum = 35, frac = 0.887
[Sat Dec 17 06:58:27 2011] Giving source the simple spatial ID 25 for pass 1, mean size = 11.49"
[Sat Dec 17 17:06:16 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src25.ximg exists
[Sat Dec 17 17:06:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src25.csv
[Sat Dec 17 17:06:16 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src25_1.ximg exists
[Sat Dec 17 17:06:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src25.csv
[Sat Dec 17 17:06:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Sat Dec 17 17:06:18 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Sat Dec 17 17:06:54 2011] Source 25 is offset by -2.625889 and 5.176663 pixels which is larger than
2 X fitted extent = 1.226506 x 1.226506, not incorporating fit results
[Sat Dec 17 17:06:54 2011] Warning, spatial fit 25 centroid is now closest to src. 21
[Sat Dec 17 17:06:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:54 2011] Assessing source extent using major
[Sat Dec 17 17:06:54 2011] Source does appear to be extended
[Sat Dec 17 17:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 19:21:44 2011] XMMSAS src. selection expression = ellipse(26067.695679, 38056.517639, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 17 19:21:44 2011] Writing source region out to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src25_src.reg
[Sat Dec 17 19:21:44 2011] Extracting stamp from image fullrun_mos2_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (263, 400) - (338, 475)
[Sat Dec 17 19:21:44 2011] XMMSAS bgd. selection expression = annulus(26067.695679, 38056.517639, 1087.500000, 2175.000000, X, Y) && !ellipse(25719.103607, 35186.518585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26619.518000, 35122.500000, 1048.064030, 1048.064030, 0.000000, X, Y) && !ellipse(26327.888000, 36086.770000, 3293.552095, 3293.552095, 0.000000, X, Y) && !ellipse(25495.764000, 36702.714600, 853.648025, 853.648025, 0.000000, X, Y) && !ellipse(25425.334000, 35690.860000, 1646.776047, 1646.776047, 0.000000, X, Y) && !ellipse(26935.730000, 35263.154000, 729.567221, 729.567221, 0.000000, X, Y) && !ellipse(25631.876800, 40642.441800, 1984.672057, 1984.672057, 0.000000, X, Y) && !ellipse(27718.160126, 36047.207397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26003.858200, 38773.562000, 2297.408066, 2297.408066, 0.000000, X, Y) && !ellipse(26353.044000, 37521.210000, 1314.104038, 1314.104038, 0.000000, X, Y) && !ellipse(26032.818800, 39455.002000, 1148.704033, 1148.704033, 0.000000, X, Y) && !ellipse(25092.305200, 40221.163560, 473.687214, 473.687214, 0.000000, X, Y) && !ellipse(25438.734200, 37697.218000, 1712.784049, 358.064010, 86.423000, X, Y) && !ellipse(25533.304657, 38082.351074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25508.222600, 38660.014000, 1941.032056, 1941.032056, 0.000000, X, Y) && !ellipse(25379.509430, 39591.955597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.588000, 39068.234000, 1267.816036, 1267.816036, 0.000000, X, Y) && !ellipse(25147.032410, 40841.452209, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 19:21:44 2011] Writing fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src25.gif
[Sat Dec 17 19:46:43 2011] Mean detx,y = (-338.17, 10407.43) 
[Sat Dec 17 19:46:43 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 19:46:53 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 19:46:53 2011] Setting source spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Dec 17 19:46:53 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Sat Dec 17 21:31:24 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 17 21:31:24 2011] rmf not generated due to insufficient counts
[Sat Dec 17 23:22:07 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:22:07 2011] Error reading totcts from fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Sat Dec 17 23:22:12 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:12 2011] Using photon index=1.80, rate=0.0596, arf fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src25.arf
[Sat Dec 17 23:22:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:12 2011] Updating source flux to 1.5e-12
[Sat Dec 17 23:30:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting