[Fri Dec 16 13:06:18 2011] Detection parameters:
  Position = (297.3, 449.0) = 5 34 35.83 22 10 16.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 279.1 +/- 25.9
  Background counts = 68.7
  Rate = 0.05 +/- 0.005

[Fri Dec 16 13:06:19 2011] Off-axis axis estimate = 10.92'
[Fri Dec 16 16:12:30 2011] Using EEF radius (= 11.89 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:12:30 2011] Initial guess for spatial extent in simple fitting = 11.89"
[Fri Dec 16 16:12:30 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.005
[Fri Dec 16 16:12:30 2011] Giving source the simple spatial ID 37 for pass 0, mean size = 11.89"
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src37.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src37.csv
[Fri Dec 16 22:06:28 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src37_1.ximg exists
[Fri Dec 16 22:06:28 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src37.csv
[Fri Dec 16 22:06:28 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src37.ximg exists
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src37_1.ximg exists
[Fri Dec 16 22:06:29 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src37 appears to have run properly
[Fri Dec 16 22:06:52 2011] Warning, spatial fit 37 centroid is now closest to src. 25
[Fri Dec 16 22:06:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:53 2011] Assessing source extent using major
[Fri Dec 16 22:06:53 2011] Source does appear to be extended
[Fri Dec 16 22:06:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:53 2011] Source is confused with source 19
[Fri Dec 16 22:06:53 2011] Source is confused with source 23
[Fri Dec 16 22:06:53 2011] Source is confused with source 21
[Sat Dec 17 06:58:27 2011] Using EEF radius (= 11.89 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:58:27 2011] Initial guess for spatial extent in simple fitting = 11.89"
[Sat Dec 17 06:58:27 2011] source mask rpix=2.7, npix_max = 41, mask sum = 42, frac = 1.005
[Sat Dec 17 06:58:27 2011] Giving source the simple spatial ID 33 for pass 1, mean size = 11.89"
[Sat Dec 17 17:06:16 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src33.ximg exists
[Sat Dec 17 17:06:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src33.csv
[Sat Dec 17 17:06:16 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src33_1.ximg exists
[Sat Dec 17 17:06:16 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src33.csv
[Sat Dec 17 17:06:16 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Sat Dec 17 17:06:18 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Sat Dec 17 17:06:18 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Sat Dec 17 17:06:54 2011] Warning, spatial fit 33 centroid is now closest to src. 20
[Sat Dec 17 17:06:54 2011] Spatial fit model total counts = 4129.070000, observed total counts = 4126.000000
[Sat Dec 17 17:06:54 2011] Offset between fit and detection position for source 22 = 3.534272 pixels
[Sat Dec 17 17:06:54 2011] Warning, changing simple spatial fit ID from 33 to 44
[Sat Dec 17 17:06:54 2011] 3947.270000 total counts/ 2730.910000 bgd. counts: snr = 23.276005
Spatial fit parameters:
  Offset between fit and detection position for source 22 = 3.534272 pixels
  Position = (299.5, 446.2) = 5 34 35.15 22 10 3.1
  Extent = 28.7 (28.7-57.4)", rotation angle = 0
  Source counts = 1216.4 +/- 62.8
  Background counts = 2730.9
  Rate = 0.2 +/- 0.01
[Sat Dec 17 17:06:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:54 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 17:06:54 2011] Source does appear to be extended
[Sat Dec 17 17:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 19:21:44 2011] Counts = 1216.360000, rescaling region sizes by 2.000000
[Sat Dec 17 19:21:44 2011] XMMSAS src. selection expression = ellipse(26003.858200, 38773.562000, 3446.112099, 3446.112099, 0.000000, X, Y)
[Sat Dec 17 19:21:44 2011] Writing source region out to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src22_src.reg
[Sat Dec 17 19:21:44 2011] Extracting stamp from image fullrun_mos2_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (101, 248) - (498, 595)
[Sat Dec 17 19:21:44 2011] XMMSAS bgd. selection expression = annulus(26003.858200, 38773.562000, 11487.040331, 22974.080661, X, Y) && !ellipse(34744.870392, 30885.750793, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35740.655060, 32427.571442, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(25719.103607, 35186.518585, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26619.518000, 35122.500000, 1048.064030, 1048.064030, 0.000000, X, Y) && !ellipse(26327.888000, 36086.770000, 3293.552095, 3293.552095, 0.000000, X, Y) && !ellipse(28355.619385, 19304.211655, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28129.073700, 20566.424530, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19747.525000, 27819.546000, 1474.512042, 1474.512042, 0.000000, X, Y) && !ellipse(29222.560791, 34922.417511, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27158.069000, 20469.674000, 1400.904040, 1400.904040, 0.000000, X, Y) && !ellipse(33759.689911, 27959.369537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25495.764000, 36702.714600, 853.648025, 853.648025, 0.000000, X, Y) && !ellipse(28226.620000, 34753.080000, 718.932021, 718.932021, 0.000000, X, Y) && !ellipse(27622.683000, 34643.409000, 1094.368031, 1094.368031, 0.000000, X, Y) && !ellipse(33961.270355, 27360.392273, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23175.083740, 34129.076172, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29308.038000, 20811.464400, 1066.072031, 1066.072031, 0.000000, X, Y) && !ellipse(25344.894000, 34261.286000, 1597.824046, 1597.824046, 0.000000, X, Y) && !ellipse(27506.120000, 20039.348000, 523.063215, 523.063215, 0.000000, X, Y) && !ellipse(25425.334000, 35690.860000, 1646.776047, 1646.776047, 0.000000, X, Y) && !ellipse(24732.806000, 34228.071400, 1588.856046, 1588.856046, 0.000000, X, Y) && !ellipse(33543.944885, 29534.027588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34024.223755, 25016.888184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25486.406000, 42841.470000, 668.395219, 668.395219, 0.000000, X, Y) && !ellipse(26067.695679, 38056.517639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30233.256000, 35019.877400, 1719.960049, 1719.960049, 0.000000, X, Y) && !ellipse(26935.730000, 35263.154000, 729.567221, 729.567221, 0.000000, X, Y) && !ellipse(25631.876800, 40642.441800, 1984.672057, 1984.672057, 0.000000, X, Y) && !ellipse(25692.648895, 41104.379761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34067.160889, 24581.306732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30776.602539, 35076.520721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27718.160126, 36047.207397, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33887.346000, 30302.224000, 2021.456058, 2021.456058, 0.000000, X, Y) && !ellipse(33930.529000, 28334.230000, 1583.840046, 1583.840046, 0.000000, X, Y) && !ellipse(28385.027200, 18874.946000, 610.303218, 610.303218, 0.000000, X, Y) && !ellipse(26353.044000, 37521.210000, 1314.104038, 1314.104038, 0.000000, X, Y) && !ellipse(28501.932065, 20631.300230, 1599.920046, 1411.999836, 6.683464, X, Y) && !ellipse(33322.557922, 32232.790527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25983.240000, 20385.549240, 1401.096040, 1401.096040, 0.000000, X, Y) && !ellipse(33510.528000, 31529.019600, 1327.376038, 1327.376038, 0.000000, X, Y) && !ellipse(34507.863892, 29963.053772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26032.818800, 39455.002000, 1148.704033, 1148.704033, 0.000000, X, Y) && !ellipse(33931.903076, 26147.888184, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29201.557169, 19738.624267, 1490.176043, 746.481061, -0.000000, X, Y) && !ellipse(25092.305200, 40221.163560, 473.687214, 473.687214, 0.000000, X, Y) && !ellipse(25508.910248, 43535.114838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34139.438751, 25522.174774, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34395.349060, 24138.272614, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30790.729950, 20659.920059, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30055.610748, 19968.926117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30094.902000, 20751.426000, 1990.720057, 1990.720057, 0.000000, X, Y) && !ellipse(34085.018616, 32385.879517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19407.971527, 28581.360596, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30367.831573, 20859.380463, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.734200, 37697.218000, 1712.784049, 358.064010, 86.423000, X, Y) && !ellipse(20082.063553, 29087.918945, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35020.614000, 29770.576000, 1712.784049, 1712.784049, 0.000000, X, Y) && !ellipse(25533.304657, 38082.351074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25216.307434, 44143.467010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34436.154205, 23643.051239, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25508.222600, 38660.014000, 1941.032056, 1941.032056, 0.000000, X, Y) && !ellipse(28985.031250, 34974.065796, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34177.431400, 30570.968000, 3408.096098, 3408.096098, 0.000000, X, Y) && !ellipse(34981.364471, 27534.957794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25379.509430, 39591.955597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32276.678000, 21066.237400, 1705.848049, 1705.848049, 0.000000, X, Y) && !ellipse(25111.588000, 39068.234000, 1267.816036, 1267.816036, 0.000000, X, Y) && !ellipse(20286.900391, 25339.816742, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33803.200531, 32842.356049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34260.290000, 31775.526000, 1047.416030, 1047.416030, 0.000000, X, Y) && !ellipse(25087.920837, 41789.377319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30451.348000, 19936.810800, 1511.624043, 1511.624043, 0.000000, X, Y) && !ellipse(19760.442800, 26951.398000, 2743.728079, 2743.728079, 0.000000, X, Y) && !ellipse(34779.132000, 28578.478000, 1684.224048, 1684.224048, 0.000000, X, Y) && !ellipse(35374.441559, 28240.300842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25038.088593, 43003.516907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24931.008606, 43435.192810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25147.032410, 40841.452209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33084.253113, 32774.700592, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24292.784000, 43739.506000, 1887.808054, 1193.416034, 0.242000, X, Y) && !ellipse(19698.871140, 30743.619110, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 19:21:44 2011] Writing fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src22.gif
[Sat Dec 17 19:54:54 2011] Mean detx,y = (-319.63, 10685.25) 
[Sat Dec 17 19:54:56 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 20:00:10 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 20:00:10 2011] Setting source spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Dec 17 20:00:10 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Sat Dec 17 23:22:08 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:22:08 2011] Error reading totcts from fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Sat Dec 17 23:22:12 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:12 2011] Using photon index=1.80, rate=0.231, arf fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src22.arf
[Sat Dec 17 23:22:12 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:12 2011] Updating source flux to 4.6e-12
[Sat Dec 17 23:30:21 2011] Flag c found in src. 22 procflags, skipping spectral fitting