[Fri Dec 16 13:06:18 2011] Detection parameters:
  Position = (399.9, 355.6) = 5 34 3.71 22 3 49.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 643.4 +/- 103.1
  Background counts = 112.3
  Rate = 0.2 +/- 0.03

[Fri Dec 16 13:06:19 2011] Off-axis axis estimate = 8.44'
[Fri Dec 16 16:12:30 2011] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:12:30 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 16 16:12:30 2011] Initial guess for spatial extent in simple fitting = 10.65"
[Fri Dec 16 16:12:30 2011] source mask rpix=2.4, npix_max = 34, mask sum = 32, frac = 0.920
[Fri Dec 16 16:12:30 2011] Giving source the simple spatial ID 1 for pass 0, mean size = 10.65"
[Fri Dec 16 22:06:27 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src1.ximg exists
[Fri Dec 16 22:06:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src1.csv
[Fri Dec 16 22:06:27 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src1_1.ximg exists
[Fri Dec 16 22:06:27 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src1.csv
[Fri Dec 16 22:06:27 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Fri Dec 16 22:06:29 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Fri Dec 16 22:06:52 2011] Warning, spatial fit 1 centroid is now closest to src. 51
[Fri Dec 16 22:06:52 2011] Source 2 is offset by 3.642165 and -0.715531 pixels which is larger than
2 X fitted extent = 1.160202 x 1.160202, not incorporating fit results
[Fri Dec 16 22:06:52 2011] Source 2 is offset by -5.785904 and 2.530561 pixels which is larger than
2 X fitted extent = 1.374129 x 1.374129, not incorporating fit results
[Fri Dec 16 22:06:53 2011] Source 2 is offset by -4.676248 and -6.033945 pixels which is larger than
2 X fitted extent = 1.200005 x 1.200005, not incorporating fit results
[Fri Dec 16 22:06:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:53 2011] Assessing source extent using major
[Fri Dec 16 22:06:53 2011] Source does appear to be extended
[Fri Dec 16 22:06:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:53 2011] Source is confused with source 54
[Fri Dec 16 22:06:53 2011] Source is confused with source 51
[Sat Dec 17 06:58:27 2011] Using EEF radius (= 10.65 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:58:27 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sat Dec 17 06:58:27 2011] Initial guess for spatial extent in simple fitting = 10.65"
[Sat Dec 17 06:58:27 2011] source mask rpix=2.4, npix_max = 34, mask sum = 32, frac = 0.920
[Sat Dec 17 06:58:27 2011] Giving source the simple spatial ID 1 for pass 1, mean size = 10.65"
[Sat Dec 17 17:06:15 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src1.ximg exists
[Sat Dec 17 17:06:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src1.csv
[Sat Dec 17 17:06:15 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src1_1.ximg exists
[Sat Dec 17 17:06:15 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src1.csv
[Sat Dec 17 17:06:15 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 17:06:17 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sat Dec 17 17:06:17 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sat Dec 17 17:06:17 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Sat Dec 17 17:06:54 2011] Warning, spatial fit 1 centroid is now closest to src. 51
[Sat Dec 17 17:06:54 2011] Source 2 is offset by 3.642165 and -0.715531 pixels which is larger than
2 X fitted extent = 1.160202 x 1.160202, not incorporating fit results
[Sat Dec 17 17:06:54 2011] Source 2 is offset by -6.554754 and 2.518147 pixels which is larger than
2 X fitted extent = 1.370345 x 1.370345, not incorporating fit results
[Sat Dec 17 17:06:54 2011] Source 2 is offset by -1.953559 and -8.854152 pixels which is larger than
2 X fitted extent = 1.269674 x 1.269674, not incorporating fit results
[Sat Dec 17 17:06:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:54 2011] Assessing source extent using major
[Sat Dec 17 17:06:54 2011] Source does appear to be extended
[Sat Dec 17 17:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 19:21:43 2011] XMMSAS src. selection expression = ellipse(34744.870392, 30885.750793, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 17 19:21:43 2011] Writing source region out to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src2_src.reg
[Sat Dec 17 19:21:43 2011] Extracting stamp from image fullrun_mos2_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (362, 318) - (437, 393)
[Sat Dec 17 19:21:43 2011] XMMSAS bgd. selection expression = annulus(34744.870392, 30885.750793, 1087.500000, 2175.000000, X, Y) && !ellipse(35740.655060, 32427.571442, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(33759.689911, 27959.369537, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33543.944885, 29534.027588, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33887.346000, 30302.224000, 2021.456058, 2021.456058, 0.000000, X, Y) && !ellipse(33930.529000, 28334.230000, 1583.840046, 1583.840046, 0.000000, X, Y) && !ellipse(33322.557922, 32232.790527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33510.528000, 31529.019600, 1327.376038, 1327.376038, 0.000000, X, Y) && !ellipse(34507.863892, 29963.053772, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34085.018616, 32385.879517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(35020.614000, 29770.576000, 1712.784049, 1712.784049, 0.000000, X, Y) && !ellipse(34177.431400, 30570.968000, 3408.096098, 3408.096098, 0.000000, X, Y) && !ellipse(33803.200531, 32842.356049, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(34260.290000, 31775.526000, 1047.416030, 1047.416030, 0.000000, X, Y) && !ellipse(34779.132000, 28578.478000, 1684.224048, 1684.224048, 0.000000, X, Y) && !ellipse(35374.441559, 28240.300842, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33084.253113, 32774.700592, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 19:21:43 2011] Writing fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src2.gif
[Sat Dec 17 19:21:50 2011] Mean detx,y = (-8100.63, 2282.14) 
[Sat Dec 17 19:21:51 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 19:21:59 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 19:21:59 2011] Setting source spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Dec 17 19:21:59 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Sat Dec 17 20:44:57 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 17 20:44:57 2011] rmf not generated due to insufficient counts
[Sat Dec 17 23:22:05 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:22:05 2011] Error reading totcts from fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Sat Dec 17 23:22:11 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:11 2011] Using photon index=1.80, rate=0.206, arf fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src2.arf
[Sat Dec 17 23:22:11 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:11 2011] Updating source flux to 3.7e-12
[Sat Dec 17 23:30:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Dec 17 23:40:37 2011] xmm0412592501/analysis//spectral/fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete