[Fri Dec 16 13:06:18 2011] Detection parameters:
  Position = (289.6, 470.0) = 5 34 38.24 22 11 42.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 111.0 +/- 18.6
  Background counts = 55.0
  Rate = 0.02 +/- 0.004

[Fri Dec 16 13:06:19 2011] Off-axis axis estimate = 12.45'
[Fri Dec 16 16:12:30 2011] Using EEF radius (= 12.66 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:12:30 2011] Initial guess for spatial extent in simple fitting = 12.66"
[Fri Dec 16 16:12:30 2011] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.903
[Fri Dec 16 16:12:30 2011] Giving source the simple spatial ID 87 for pass 0, mean size = 12.66"
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src87.ximg exists
[Fri Dec 16 22:06:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src87.csv
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src87_1.ximg exists
[Fri Dec 16 22:06:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src87.csv
[Fri Dec 16 22:06:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src87_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src87.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:30 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src87.ximg exists
[Fri Dec 16 22:06:30 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src87_1.ximg exists
[Fri Dec 16 22:06:30 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src87 appears to have run properly
[Fri Dec 16 22:06:53 2011] Warning: source 81 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 13.609678 pixels away
[Fri Dec 16 22:06:53 2011] Warning, spatial fit 87 centroid is now closest to src. 5
[Fri Dec 16 22:06:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:53 2011] Assessing source extent using major
[Fri Dec 16 22:06:53 2011] Source does appear to be extended
[Fri Dec 16 22:06:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:53 2011] Source is confused with source 18
[Sat Dec 17 06:58:27 2011] Using EEF radius (= 12.66 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:58:27 2011] Initial guess for spatial extent in simple fitting = 12.66"
[Sat Dec 17 06:58:27 2011] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.903
[Sat Dec 17 06:58:27 2011] Giving source the simple spatial ID 77 for pass 1, mean size = 12.66"
[Sat Dec 17 17:06:17 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src77.ximg exists
[Sat Dec 17 17:06:17 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src77_1.ximg exists
[Sat Dec 17 17:06:17 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src77 appears to have run properly
[Sat Dec 17 17:06:20 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src77.ximg exists
[Sat Dec 17 17:06:20 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src77_1.ximg exists
[Sat Dec 17 17:06:20 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src77 appears to have run properly
[Sat Dec 17 17:06:54 2011] Warning: source 71 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 17 at 13.642134 pixels away
[Sat Dec 17 17:06:54 2011] Source 17 is offset by 0.684204 and 7.398853 pixels which is larger than
2 X fitted extent = 2.780418 x 2.780418, not incorporating fit results
[Sat Dec 17 17:06:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:54 2011] Assessing source extent using major
[Sat Dec 17 17:06:54 2011] Source does appear to be extended
[Sat Dec 17 17:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 19:21:46 2011] XMMSAS src. selection expression = ellipse(25147.032410, 40841.452209, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 17 19:21:46 2011] Writing source region out to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src17_src.reg
[Sat Dec 17 19:21:46 2011] Extracting stamp from image fullrun_mos2_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (252, 432) - (327, 507)
[Sat Dec 17 19:21:46 2011] XMMSAS bgd. selection expression = annulus(25147.032410, 40841.452209, 1087.500000, 2175.000000, X, Y) && !ellipse(26327.888000, 36086.770000, 3293.552095, 3293.552095, 0.000000, X, Y) && !ellipse(25486.406000, 42841.470000, 668.395219, 668.395219, 0.000000, X, Y) && !ellipse(26067.695679, 38056.517639, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25631.876800, 40642.441800, 1984.672057, 1984.672057, 0.000000, X, Y) && !ellipse(25692.648895, 41104.379761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26003.858200, 38773.562000, 2297.408066, 2297.408066, 0.000000, X, Y) && !ellipse(26353.044000, 37521.210000, 1314.104038, 1314.104038, 0.000000, X, Y) && !ellipse(26032.818800, 39455.002000, 1148.704033, 1148.704033, 0.000000, X, Y) && !ellipse(25092.305200, 40221.163560, 473.687214, 473.687214, 0.000000, X, Y) && !ellipse(25508.910248, 43535.114838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.734200, 37697.218000, 1712.784049, 358.064010, 86.423000, X, Y) && !ellipse(25533.304657, 38082.351074, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25508.222600, 38660.014000, 1941.032056, 1941.032056, 0.000000, X, Y) && !ellipse(25379.509430, 39591.955597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.588000, 39068.234000, 1267.816036, 1267.816036, 0.000000, X, Y) && !ellipse(25087.920837, 41789.377319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25038.088593, 43003.516907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24931.008606, 43435.192810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24292.784000, 43739.506000, 1887.808054, 1193.416034, 0.242000, X, Y)
[Sat Dec 17 19:21:46 2011] Writing fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src17.gif
[Sat Dec 17 20:43:02 2011] Mean detx,y = (228.90, 13261.16) 
[Sat Dec 17 20:43:03 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 20:43:15 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 20:43:16 2011] Setting source spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Dec 17 20:43:16 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src17_bgd.pi.gz
[Sat Dec 17 23:14:58 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 17 23:14:58 2011] rmf not generated due to insufficient counts
[Sat Dec 17 23:22:10 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:22:10 2011] Error reading totcts from fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src17_src_b10.pi.gz
[Sat Dec 17 23:22:15 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:15 2011] Using photon index=1.80, rate=0.0211, arf fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src17.arf
[Sat Dec 17 23:22:15 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:15 2011] Updating source flux to 1.2e-12
[Sat Dec 17 23:30:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting