[Fri Dec 16 13:06:18 2011] Detection parameters:
  Position = (288.9, 480.9) = 5 34 38.45 22 12 36.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 128.8 +/- 19.6
  Background counts = 53.1
  Rate = 0.02 +/- 0.004

[Fri Dec 16 13:06:19 2011] Off-axis axis estimate = 13.25'
[Fri Dec 16 16:12:30 2011] Using EEF radius (= 13.05 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:12:30 2011] Initial guess for spatial extent in simple fitting = 13.05"
[Fri Dec 16 16:12:30 2011] source mask rpix=3.0, npix_max = 49, mask sum = 47, frac = 0.959
[Fri Dec 16 16:12:30 2011] Giving source the simple spatial ID 81 for pass 0, mean size = 13.05"
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src81.ximg exists
[Fri Dec 16 22:06:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src81.csv
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src81_1.ximg exists
[Fri Dec 16 22:06:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src81.csv
[Fri Dec 16 22:06:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src81_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src81.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:30 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src81.ximg exists
[Fri Dec 16 22:06:30 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src81_1.ximg exists
[Fri Dec 16 22:06:30 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src81 appears to have run properly
[Fri Dec 16 22:06:53 2011] Warning: source 52 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 16 at 12.375899 pixels away
[Fri Dec 16 22:06:53 2011] Warning, spatial fit 81 centroid is now closest to src. 17
[Fri Dec 16 22:06:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:53 2011] Assessing source extent using major
[Fri Dec 16 22:06:53 2011] Source does appear to be extended
[Fri Dec 16 22:06:53 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 06:58:27 2011] Using EEF radius (= 13.05 ")to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:58:27 2011] Initial guess for spatial extent in simple fitting = 13.05"
[Sat Dec 17 06:58:27 2011] source mask rpix=3.0, npix_max = 49, mask sum = 47, frac = 0.959
[Sat Dec 17 06:58:27 2011] Giving source the simple spatial ID 71 for pass 1, mean size = 13.05"
[Sat Dec 17 17:06:17 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src71.ximg exists
[Sat Dec 17 17:06:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src71.csv
[Sat Dec 17 17:06:17 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src71_1.ximg exists
[Sat Dec 17 17:06:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src71.csv
[Sat Dec 17 17:06:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src71_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src71.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 17:06:19 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src71.ximg exists
[Sat Dec 17 17:06:19 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src71_1.ximg exists
[Sat Dec 17 17:06:19 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src71 appears to have run properly
[Sat Dec 17 17:06:54 2011] Warning, spatial fit 71 centroid is now closest to src. 17
[Sat Dec 17 17:06:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:54 2011] Assessing source extent using major
[Sat Dec 17 17:06:54 2011] Source does appear to be extended
[Sat Dec 17 17:06:54 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 17:06:54 2011] Source is confused with source 5
[Sat Dec 17 19:21:46 2011] XMMSAS src. selection expression = ellipse(25087.920837, 41789.377319, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 17 19:21:46 2011] Writing source region out to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src16_src.reg
[Sat Dec 17 19:21:46 2011] Extracting stamp from image fullrun_mos2_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (251, 443) - (326, 518)
[Sat Dec 17 19:21:46 2011] XMMSAS bgd. selection expression = annulus(25087.920837, 41789.377319, 1087.500000, 2175.000000, X, Y) && !ellipse(25486.406000, 42841.470000, 668.395219, 668.395219, 0.000000, X, Y) && !ellipse(25631.876800, 40642.441800, 1984.672057, 1984.672057, 0.000000, X, Y) && !ellipse(25692.648895, 41104.379761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26003.858200, 38773.562000, 2297.408066, 2297.408066, 0.000000, X, Y) && !ellipse(26032.818800, 39455.002000, 1148.704033, 1148.704033, 0.000000, X, Y) && !ellipse(25092.305200, 40221.163560, 473.687214, 473.687214, 0.000000, X, Y) && !ellipse(25508.910248, 43535.114838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25216.307434, 44143.467010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25508.222600, 38660.014000, 1941.032056, 1941.032056, 0.000000, X, Y) && !ellipse(25379.509430, 39591.955597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.588000, 39068.234000, 1267.816036, 1267.816036, 0.000000, X, Y) && !ellipse(25038.088593, 43003.516907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24931.008606, 43435.192810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25147.032410, 40841.452209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24292.784000, 43739.506000, 1887.808054, 1193.416034, 0.242000, X, Y)
[Sat Dec 17 19:21:46 2011] Writing fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src16.gif
[Sat Dec 17 20:34:05 2011] Mean detx,y = (182.16, 14215.53) 
[Sat Dec 17 20:34:06 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 20:34:16 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 20:34:16 2011] Setting source spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Dec 17 20:34:16 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src16_bgd.pi.gz
[Sat Dec 17 22:59:16 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 17 22:59:16 2011] rmf not generated due to insufficient counts
[Sat Dec 17 23:22:10 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:22:10 2011] Error reading totcts from fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src16_src_b10.pi.gz
[Sat Dec 17 23:22:14 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:14 2011] Using photon index=1.80, rate=0.0245, arf fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src16.arf
[Sat Dec 17 23:22:14 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:14 2011] Updating source flux to 1.9e-09
[Sat Dec 17 23:30:21 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting