[Fri Dec 16 13:06:18 2011] Detection parameters:
  Position = (287.2, 505.0) = 5 34 38.98 22 14 18.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 104.6 +/- 17.6
  Background counts = 41.3
  Rate = 0.02 +/- 0.003

[Fri Dec 16 13:06:19 2011] Off-axis axis estimate = 15.00'
[Fri Dec 16 16:12:30 2011] Using EEF radius (= 13.93 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 16:12:30 2011] Initial guess for spatial extent in simple fitting = 13.93"
[Fri Dec 16 16:12:30 2011] source mask rpix=3.2, npix_max = 54, mask sum = 53, frac = 0.967
[Fri Dec 16 16:12:30 2011] Giving source the simple spatial ID 88 for pass 0, mean size = 13.93"
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src88.ximg exists
[Fri Dec 16 22:06:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src88.csv
[Fri Dec 16 22:06:29 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src88_1.ximg exists
[Fri Dec 16 22:06:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src88.csv
[Fri Dec 16 22:06:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 22:06:30 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Fri Dec 16 22:06:30 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Fri Dec 16 22:06:30 2011] Fit fullrun_mos2_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src88 appears to have run properly
[Fri Dec 16 22:06:53 2011] Spatial fit model total counts = 1493.940000, observed total counts = 1493.000000
[Fri Dec 16 22:06:53 2011] Offset between fit and detection position for source 11 = 6.039390 pixels
[Fri Dec 16 22:06:53 2011] Warning, changing simple spatial fit ID from 88 to 86
[Fri Dec 16 22:06:53 2011] 1421.689000 total counts/ 1184.350000 bgd. counts: snr = 6.896505
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 6.039390 pixels
  Position = (281.3, 503.9) = 5 34 40.84 22 14 14.1
  Extent = 27.5 (27.3-55.0)" x 14.0 (9.4-20.3)", rotation angle = 158 (143-206) degrees
  Source counts = 237.3 +/- 37.7
  Background counts = 1184.3
  Rate = 0.05 +/- 0.007
[Fri Dec 16 22:06:53 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:53 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:53 2011] Assessing source extent using major axis lower bound
[Fri Dec 16 22:06:53 2011] Source does appear to be extended
[Fri Dec 16 22:06:53 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.35
[Fri Dec 16 22:06:53 2011] Source is confused with source 8
[Sat Dec 17 06:58:27 2011] Using previous fit value to estimate initial spatial extent for simple fitting
[Sat Dec 17 06:58:27 2011] Initial guess for spatial extent in simple fitting = 20.75"
[Sat Dec 17 06:58:27 2011] source mask rpix=4.8, npix_max = 111, mask sum = 107, frac = 0.963
[Sat Dec 17 06:58:27 2011] Giving source the simple spatial ID 78 for pass 1, mean size = 20.75"
[Sat Dec 17 17:06:17 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src78.ximg exists
[Sat Dec 17 17:06:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src78.csv
[Sat Dec 17 17:06:17 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src78_1.ximg exists
[Sat Dec 17 17:06:17 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src78.csv
[Sat Dec 17 17:06:17 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 17:06:20 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Sat Dec 17 17:06:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src78.csv
[Sat Dec 17 17:06:20 2011] fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Sat Dec 17 17:06:20 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src78.csv
[Sat Dec 17 17:06:20 2011] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 17:06:54 2011] Spatial fit model total counts = 1501.250000, observed total counts = 1493.000000
[Sat Dec 17 17:06:54 2011] Offset between fit and detection position for source 11 = 1.622423 pixels
[Sat Dec 17 17:06:54 2011] Warning, changing simple spatial fit ID from 78 to 76
[Sat Dec 17 17:06:54 2011] 1439.995000 total counts/ 1249.530000 bgd. counts: snr = 5.388177
Spatial fit parameters:
  Offset between fit and detection position for source 11 = 1.622423 pixels
  Position = (279.8, 503.3) = 5 34 41.31 22 14 11.4
  Extent = 23.6 (15.9-27.5)" x 14.9 (10.2-23.0)", rotation angle = 0
  Source counts = 190.5 +/- 37.9
  Background counts = 1249.5
  Rate = 0.04 +/- 0.007
[Sat Dec 17 17:06:54 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:54 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:54 2011] Assessing source extent using major axis lower bound
[Sat Dec 17 17:06:54 2011] Source does appear to be extended
[Sat Dec 17 17:06:54 2011] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 0.69
[Sat Dec 17 19:21:46 2011] XMMSAS src. selection expression = ellipse(24292.784000, 43739.506000, 1415.856041, 895.062026, 0.242000, X, Y)
[Sat Dec 17 19:21:46 2011] Writing source region out to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src11_src.reg
[Sat Dec 17 19:21:46 2011] Extracting stamp from image fullrun_mos2_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (198, 422) - (361, 585)
[Sat Dec 17 19:21:46 2011] XMMSAS bgd. selection expression = annulus(24292.784000, 43739.506000, 2359.760068, 4719.520136, X, Y) && !ellipse(26327.888000, 36086.770000, 3293.552095, 3293.552095, 0.000000, X, Y) && !ellipse(25486.406000, 42841.470000, 668.395219, 668.395219, 0.000000, X, Y) && !ellipse(25631.876800, 40642.441800, 1984.672057, 1984.672057, 0.000000, X, Y) && !ellipse(25692.648895, 41104.379761, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26003.858200, 38773.562000, 2297.408066, 2297.408066, 0.000000, X, Y) && !ellipse(26032.818800, 39455.002000, 1148.704033, 1148.704033, 0.000000, X, Y) && !ellipse(25092.305200, 40221.163560, 473.687214, 473.687214, 0.000000, X, Y) && !ellipse(25508.910248, 43535.114838, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25438.734200, 37697.218000, 1712.784049, 358.064010, 86.423000, X, Y) && !ellipse(25216.307434, 44143.467010, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25508.222600, 38660.014000, 1941.032056, 1941.032056, 0.000000, X, Y) && !ellipse(25379.509430, 39591.955597, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25111.588000, 39068.234000, 1267.816036, 1267.816036, 0.000000, X, Y) && !ellipse(25087.920837, 41789.377319, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25038.088593, 43003.516907, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24931.008606, 43435.192810, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25147.032410, 40841.452209, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 19:21:46 2011] Writing fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src11.gif
[Sat Dec 17 20:43:31 2011] Mean detx,y = (442.49, 16075.76) 
[Sat Dec 17 20:43:33 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 20:44:06 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 20:44:06 2011] Setting source spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Dec 17 20:44:06 2011] Setting bgd. spectrum file to fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Dec 17 23:22:11 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:22:11 2011] Error reading totcts from fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Dec 17 23:22:15 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:15 2011] Using photon index=1.80, rate=0.0362, arf fullrun_mos2_xmm0412592501_pi300-10000_pass1_cl_src11.arf
[Sat Dec 17 23:22:15 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:15 2011] Updating source flux to 1.4e-12
[Sat Dec 17 23:30:21 2011] Flag c found in src. 11 procflags, skipping spectral fitting