[Fri Dec 16 13:05:46 2011] Detection parameters:
  Position = (356.9, 402.0) = 5 34 17.16 22 6 31.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.9 +/- 26.9
  Background counts = 175.0
  Rate = 0.04 +/- 0.005

[Fri Dec 16 13:05:47 2011] Off-axis axis estimate = 8.62'
[Fri Dec 16 13:07:28 2011] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 13:07:28 2011] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri Dec 16 13:07:28 2011] Initial guess for spatial extent in simple fitting = 10.74"
[Fri Dec 16 13:07:28 2011] source mask rpix=2.5, npix_max = 35, mask sum = 26, frac = 0.738
[Fri Dec 16 13:07:28 2011] Giving source the simple spatial ID 9 for pass 0, mean size = 10.74"
[Fri Dec 16 16:12:29 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src9.ximg exists
[Fri Dec 16 16:12:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src9.csv
[Fri Dec 16 16:12:29 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src9_1.ximg exists
[Fri Dec 16 16:12:29 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src9.csv
[Fri Dec 16 16:12:29 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Dec 16 16:12:29 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Fri Dec 16 16:12:29 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Fri Dec 16 16:12:29 2011] Fit fullrun_mos1_xmm0412592501_pi300-10000_cl_pass0_tfrozen_src9 appears to have run properly
[Fri Dec 16 22:06:40 2011] Warning, spatial fit 9 centroid is now closest to src. 57
[Fri Dec 16 22:06:40 2011] Vigneting correction estimate = 1.000000
[Fri Dec 16 22:06:40 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Dec 16 22:06:40 2011] Assessing source extent using major
[Fri Dec 16 22:06:40 2011] Source does appear to be extended
[Fri Dec 16 22:06:40 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Dec 16 22:06:40 2011] Source is confused with source 42
[Fri Dec 16 22:06:40 2011] Source is confused with source 57
[Fri Dec 16 22:07:05 2011] Using EEF radius (= 10.74 ")to estimate initial spatial extent for simple fitting
[Fri Dec 16 22:07:05 2011] Initial guess for spatial extent in simple fitting = 10.74"
[Fri Dec 16 22:07:05 2011] source mask rpix=2.5, npix_max = 35, mask sum = 26, frac = 0.738
[Fri Dec 16 22:07:05 2011] Giving source the simple spatial ID 9 for pass 1, mean size = 10.74"
[Sat Dec 17 06:58:24 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src9.ximg exists
[Sat Dec 17 06:58:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src9.csv
[Sat Dec 17 06:58:24 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Dec 17 06:58:24 2011] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src9.csv
[Sat Dec 17 06:58:24 2011] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Dec 17 06:58:25 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Dec 17 06:58:25 2011] fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Dec 17 06:58:25 2011] Fit fullrun_mos1_xmm0412592501_pi300-10000_cl_pass1_tfrozen_src9 appears to have run properly
[Sat Dec 17 17:06:36 2011] Warning, spatial fit 9 centroid is now closest to src. 57
[Sat Dec 17 17:06:36 2011] Vigneting correction estimate = 1.000000
[Sat Dec 17 17:06:36 2011] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Dec 17 17:06:36 2011] Assessing source extent using major
[Sat Dec 17 17:06:36 2011] Source does appear to be extended
[Sat Dec 17 17:06:36 2011] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Dec 17 17:07:07 2011] XMMSAS src. selection expression = ellipse(31004.911163, 34921.905090, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Dec 17 17:07:07 2011] Writing source region out to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src9_src.reg
[Sat Dec 17 17:07:07 2011] Extracting stamp from image fullrun_mos1_xmm0412592501_pi300-10000_cl_sm2.00.img.gz, (319, 364) - (394, 439)
[Sat Dec 17 17:07:07 2011] XMMSAS bgd. selection expression = annulus(31004.911163, 34921.905090, 1087.500000, 2175.000000, X, Y) && !ellipse(27355.342000, 34652.845720, 1779.752051, 1779.752051, 0.000000, X, Y) && !ellipse(28484.487220, 34636.296400, 889.832026, 889.832026, 0.000000, X, Y) && !ellipse(33359.847809, 32149.815552, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30445.764648, 34876.474884, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28103.954468, 35840.043427, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31710.078000, 35239.618000, 1741.176050, 1741.176050, 0.000000, X, Y) && !ellipse(29088.651733, 34773.719940, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33145.257721, 33085.668243, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Dec 17 17:07:07 2011] Writing fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src9.gif
[Sat Dec 17 17:20:13 2011] Mean detx,y = (7073.73, 4713.32) 
[Sat Dec 17 17:20:14 2011] Setting backscal keywords in source and bgd. spectrum
[Sat Dec 17 17:20:24 2011] Binned source spectrum to 10 counts/bin
[Sat Dec 17 17:20:24 2011] Setting source spectrum file to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Dec 17 17:20:24 2011] Setting bgd. spectrum file to fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Sat Dec 17 18:15:46 2011] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Dec 17 18:15:46 2011] rmf not generated due to insufficient counts
[Sat Dec 17 23:21:56 2011] Updating aperture counts using extracted products
[Sat Dec 17 23:21:56 2011] Error reading totcts from fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Sat Dec 17 23:22:00 2011] Calculating source flux in energy range 0.30-8.00
[Sat Dec 17 23:22:00 2011] Using photon index=1.80, rate=0.0383, arf fullrun_mos1_xmm0412592501_pi300-10000_pass1_cl_src9.arf
[Sat Dec 17 23:22:00 2011] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Dec 17 23:22:00 2011] Updating source flux to 6.8e-13
[Sat Dec 17 23:22:17 2011] Simple spatial fitting not done (or not done successfully), skipping spectral fitting